American Standard BAYSPEK047A Instrucciones de montaje

EHTR-IN-34C

18-HB20D2-4

IMPORTANT -- This is customer property and is to remain

with this unit. Please return to service

information pack upon completion of work.

INSTALLER'S

GUIDE

Single Power

Entry Kit

* = "C", "P", "X", "Y", or "Z"

Since The Trane Company has a policy of continuous product and product data

improvement, it reserves the right to change design and specification without notice.

Library Service Literature

Product Section Unitary

Product Unitary Accessories

Model Electric,Steam,Hot Water Coils

Literature Type Installer’s Guide

Sequence 34C

Date April 2000

File No. SV-UN-ACC-EHTR-IN-34C 4/00

Supersedes EHTR-IN-34B

Models:

BAYSPEK047A-

BAYSPEK053A

Used With:

TCC / WCC - F

TCM / WCM - F

TCP / WCP - F

TCX / WCX - G

TCY / WCY - G WCZ - F

SINGLE POWER

ENTRY KIT HEATER

MODEL UNIT MODEL

BAYSPEK047A BAYHTRN105A

BAYHTRN108A

BAYHTRN110A

BAYHTRN306A

BAYHTRN310A,310F

BAYHTRN315A

BAYHTRN406A

BAYHTRN410A,410F

BAYHTRN415A

BAYHTRN420A

BAYHTRN430A

BAYHTRNW10A

BAYHTRNW15A

BAYHTRNW20A

BAYHTRNW30A

TC*/WC*018-042F/G1; TCM/WCM030-042F1

TC*018-042F/G1; WC*018,024F/G1; TCM030-042F1

TC*024-048F/G1; TCM030-042F1

TC*/WC*036,048,060F/G3

TC*036-060F/G3; WC*036-048F/G3

TC*036-060F/G3

TC*/WC*036,048,060F/G4

TC*/WC*048,060F/G4

TC*/WC*060F/G4

TCC/WCC036,048,060FW

TCC/WCC048,060FW

TCC/WCC060FW

BAYSPEK048A BAYHTRN115A

BAYHTRN117A

BAYHTRN123A

TC*/WC*030-048F.G1; TCM/WCM030-042F1

TC*/WC*030-048F/G1; WCM/TCM030-048F1

TC*/WC*048F/G1

BAYSPEK049A BAYHTRN108A

BAYHTRN110A

BAYHTRN112A

WC*030-042F/G1; WCM030-042F1

WC*024-048F/G1; WCM030-042F1

TC*/WC024-048F/G1; TCM/WCM030-042F1

BAYSPEK050A BAYHTRN330A TC*/WC*060F/G3

BAYSPEK051A BAYHTRN310A,310F

BAYHTRN315A

BAYHTRN320A

WC*060F/G3

WC*036-060F/G3

TC*/WC*042-060F/G3

BAYSPEK052A BAYHTRN115A

BAYHTRN117A

BAYHTRN123A

TC*/WC*060F/G1

BAYSPEK053A BAYHTRN105A

BAYHTRN110A

BAYHTRN112A

TCC060F1

TC*/WC*060F/G1

INSTALLER'S GUIDE

PAGE 2 Pub. No. 18-HB20D2-4

GENERAL

These instructions are for the installation of single point power

entry kit in single package units described in the table on page 1.

1. Check for any shipping damage, and if any, report it to the

carrier immediately.

2. Check the single power entry kit nameplate and compare with

the table on page 1, make certain that the available power

supply complies with the particular single power entry kit,

heater and unit model being used.

3. The field electrical connections and wiring must be done in

accordance with the “National Electrical Code” and must com-

ply with local electrical codes.

IMPORTANT: The two (2) nameplate labels included

with the single power entry kit, must be attached to the

air conditioning unit or heat pump unit as illustrated

below.

The smaller label must be placed over the unit nameplate

to cover the unit only min. circuit ampacity and fusing.

The “single power entry installed” nameplate must be

placed over the “heater installed” nameplate.

Check the appropriate kit, heaters and unit combination.

HIGH VOLTAGE FIELD WIRING

NOTE: All field wire to be rated 75°C minimum. Maximum field

wire size is 2/0 AWG.

1. Check to make certain the proper size fuses are installed per

the fuse table (located on the wiring diagram) for the particu-

lar single power entry kit being used.

2. Remove the required knockout from the unit conduit panel

and route field wires through the unit control box.

3. Connect power supply to the terminal block on the single power

entry kit. See appropriate wiring diagram for hookup connec-

tions. Connect the power supply ground wire to the ground

lug on the single power entry kit.

4. Close the heater and single power entry kit control box cover.

5. Reinstall the air conditioner’s or heat pump’s access panels.

6. Apply power to unit.

LOW VOLTAGE WIRING (24 Volts)

All low voltage connections have been made to the heater via

polarized plugs. The low voltage controls are connected to the

room thermostat from the air conditioner or heat pump low volt-

age leads. See the field wiring diagram with the unit.

INSTALLATION OF SINGLE POWER ENTRY KIT

1. Remove screws that secure the air conditioner’s or heat pump’s

heater and control box access panels.

2. Remove and discard sheet metal screws from where the single

power entry kit is to be mounted in the unit. See Figures 1 and 2.

3. Insert grommet in hole that leads to the control compartment

where unit power and field wires will pass thru.

4. Position single power entry kit to unit as illustrated in Figures

1 and 2.

5. Secure single power entry kit to unit with screws provided in kit.

NOTE: The BAYSPEK047A kit does not include a hinged

access door.

6. Make all electrical connections to the unit and heater in accor-

dance with the appropriate wiring diagram in this instruction

and attached to the specific single power entry kit.

▲

WARNING:

TO PREVENT INJURY OR DEATH

DUE TO ELECTRICAL SHOCK OR CONTACT WITH MOVING

PARTS. LOCK UNIT DISCONNECT SWITCH IN OPEN

POSITION BEFORE SERVICING UNIT.

POSITION FOR LABELS IN

SINGLE POINT

POWER ENTRY KIT

UNIT NAMEPLATE

HEATER

INSTALLED

NAMEPLATE

SINGLE

POWER

ENTRY

INSTALLED

NAMEPLATE

FOR UL RATING REQUIREMENTS SEE

THE SINGLE POWER ENTRY INSTALL

NAMEPLATE FOR MINIMUM CIRCUIT

AMPACITY AND MAXIMUM OVERCURRENT

PROTECTION SIZE INFORMATION.

SMALLER

LABEL

From Dwg. 21B730227

INSTALLER'S GUIDE

Pub. No. 18-HB20D2-4 PAGE 3

INSTALLER'S GUIDE

PAGE 4 Pub. No. 18-HB20D2-4

INSTALLER'S GUIDE

Pub. No. 18-HB20D2-4 PAGE 5

TYPICAL SINGLE POINT POWER ENTRY KIT

INSTALLER'S GUIDE

PAGE 6 Pub. No. 18-HB20D2-4

TYPICAL SINGLE POINT POWER ENTRY KIT

INSTALLER'S GUIDE

Pub. No. 18-HB20D2-4 PAGE 7

BAYSPEK047A

FromDwg.21C756991P01

INSTALLER'S GUIDE

PAGE 8 Pub. No. 18-HB20D2-4

BAYSPEK048A

BAYSPEK049A

FromDwg.21C756986P01

FromDwg.21C756985P01

INSTALLER'S GUIDE

Pub. No. 18-HB20D2-4 PAGE 9

BAYSPEK050A

BAYSPEK051A

FromDwg.21C756988P01

FromDwg.21C756987P01

INSTALLER'S GUIDE

PAGE 10 Pub. No. 18-HB20D2-4

BAYSPEK052A

BAYSPEK053A

FromDwg.21C756990P01

FromDwg.21C756989P01

Este manual sirve para los siguientes modelos

Otros manuales de Unidad de control de American Standard

American Standard

American Standard 7017 Series Manual de usuario

American Standard

American Standard AccuLink Platinum 1050 Manual de usuario

American Standard

American Standard R910 Flash Manual de usuario

American Standard

American Standard ACONT401AN21MA Manual de usuario

American Standard

American Standard 6047.8 Series Manual de usuario

American Standard

American Standard 6047.800 Manual de usuario

American Standard

American Standard R110 Manual de usuario

American Standard

American Standard R129 Manual de usuario

American Standard

American Standard Ultima 6045.051 Manual de usuario

American Standard

American Standard SELECTRONIC 6067.111 Manual de usuario

American Standard

American Standard Ultima Selectronic 6064.013 Manual de usuario

American Standard

American Standard Ultima 6147SM Manual de usuario

American Standard

American Standard 50A65-475 Manual de usuario

American Standard

American Standard SELECTRONIC 6590.525 Manual de usuario

American Standard

American Standard Selectronic 606B.X10 Manual de usuario

American Standard

American Standard SELECTRONIC 6066.111 Manual de usuario

American Standard

American Standard SELECTRONIC 6065.521 Manual de usuario

American Standard

American Standard Ultima 6145SM Manual de usuario

American Standard

American Standard R127 Manual de usuario

American Standard

American Standard BORNEO Manual de usuario

American Standard

American Standard 6045.101 Manual de usuario

American Standard

American Standard SELECTRONIC 605XTMV1070 Manual de usuario

American Standard

American Standard R111 Manual de usuario

American Standard

American Standard SELECTRONIC 606B.111 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario