Amconn KVM312IC Manual de usuario
KVM312IC / KVM314IC
2/4 PORT PS/2 KVM Switch
User Manual
Introduction .............................................................................P1
Equipment Requirements .......................................................P1
Features .................................................................................P2
Package Contents ..................................................................P2
Specifications .........................................................................P3
Overview.................................................................................P4
Display Diagrams ...................................................................P6
Installation ..............................................................................P7
Pre-Configuration ..............................................................P7
Hardware Installation ........................................................P8
Operation .............................................................................. P11
Powering Up the Systems ............................................... P11
Selecting Computers Using Front-panel Selectors ......... P11
Selecting Computers Using keyboard Hot Key Commands P11
TABLE OF CONTENTS
-1-
INTRODUCTION
Thank you for purchasing AMCONN’s ExsorVew PS/2 KVM
Switch. The ME series allows users to control 2 (KVM312IC) and
up to 4 (KVM314IC) PS/2 computers from a single PS/2 console
(PS/2 keyboard, PS/2 mouse and monitor).
The KVM312IC / KVM314IC is both compact and portable, its
small desktop footprint is ideal for on or under your desktop.
Setup is fast and easy. There is no software to configure. It has
keyboard, mouse and video emulation for error free boot-ups and
support is also provided for Microsoft Intellimouse. The KVM312IC
/ KVM314IC supports high video resolutions, up to 1920 x 1440
without deterioration of the image quality. Switching between
PCs can be accomplished in two ways: via keyboard Hot Key
commands or by using the convenient front-panel pushbutton
controls. The series comes standard with AMCONN’s limited
warranty.
EQUIPMENT REQUIREMENTS
Cables
You will need the following equipment for each PS/2 computer to
connect to the AMCONN ExsorView Series KVM Switch.
The following all-in-one AMCONN cable sets are recommended;
n K5C6 (1.8m)
n K5C9 (3.0m)
n K5C0 (4.8m)
Computer PortSwitch Port
HDDB 15 pin Male
PS/2 Mini Din 6 pin Male
（Keyboard）
HDDB 15 pin Male
PS/2 Mini Din 6 pin Male
（Mouse）
-2-
KVM312/314IC
FEATURES
n
Allows users to control 2 (KVM312IC) or up to 4 (KVM314IC)
computers from single PS/2 console (PS/2 mouse, PS/2 keyboard
and monitor)
n
Easy switching via Hotkeys or manual port selectors
n
Easy installation - no software to install
n
Easy access - logically designed front panel keyboard & mouse
ports
n
Keyboard and mouse emulation allows error-free booting
n
Caps Lock, Scroll Lock and Num Lock status is stored for
each PC
n
Supports high resolution video - up to 1920 x 1440 @75MHz;
VGA, SVGA monitors and MultiSync monitors
n
AutoScan mode for convenient automatic switching
n
Front panel status LEDs give a clear indication of the active
computer
n
Audible feedback when switching between computers
n
Works with Windows® 95,98,ME,2000,NT,XP, Linux, Free BSD
PACKAGE CONTENTS
Item Qty Remark
KVM312/314IC 1 PS/2 KVM Switch
K5C4 1 / 2 1.2m Cable(s)
K5C6 1 / 2 1.8m Cable(s)
User Manual 1
-3-
SPECIFICATIONS
Computer connections:
Keyboard/Mouse/Monitor 2/4 sets: HDDB 15 pin Female
Console Connections:
Keyboard 1 set: PS/2 Mini Din 6 pin Female
Mouse 1 set: PS/2 Mini Din 6 pin Female
Monitor 1 set: HDDB15 pin Female
Port LEDs 2/4
Hot Keys Yes
Resolution 1920 x 1440 @75Hz
Dimensions(W x D x H) 133 x 64 x 22mm / 214x 79 x 22mm
Weight 125g / 213g
Operating Temp 32˚ to 104˚F (0˚-40˚C)
Storage Temp -4˚ to 140˚F (-20˚-60˚C)
Humidity 0 – 80% RH, non-condensing
Power Supply (Optional) DC 9V, 600mA adapter
Warranty 18 months
Note: Specifications are subject to change without notice.
-4-
KVM312/314IC
OVERVIEW
Hot Keys
The Hot key feature allows you to use designated keyboard
commands to select ports, start AutoScan, and enable / disable
the “beeper” sound. You can control multiple computers by using a
simple hot key sequence on your keyboard.
AutoScan
The AutoScan function allows you to automatically scan and
monitor all computers - one by one, that are connected to your
KVM Switch.
Superior Video Resolution
With a 400MHz video bandwidth, the KVM312IC / KVM314IC
can support video resolutions of up to 1920 x 1440 @75Hz. (To
preserve signal integrity at high resolutions, a 75-Ohm coaxial
VGA cabling is required)
Easy Console Access
Logically designed front panel console keyboard & mouse ports for
a hassle free setup.
Manual Port Selectors
Push buttons conveniently located on the top panel of the
KVM312IC / KVM314IC provide simple manual port selection.
-5-
LED Display
Port LEDs allow for easy status monitoring. A lit LED indicates
which computer the KVM console currently has control of. The
LED will light with the corresponding active port when switching
between the computers.
PS/2 Interface Support
The Switch supports computers with PS/2 input devices (keyboard
and mouse).
Optional “Beeper” Setup
Users can customize their setup to enable/disable the “Beep”
sound when switching between computers.
-6-
KVM312/314IC
DISPLAY DIAGRAMS
Front View
1. Console PS/2 keyboard and PS/2 mouse ports
2. Direct access port selector/s
• Lights RED indicating that the connected computer has the
KVM focus (SELECTED).
3. LEDs
Rear View
1. Console VGA port
2. Computer VGA ports
Side View
1. Power Jack (9V DC, 600mA)
2
2
3
1
1
KVM312IC
KVM314IC
12
12
ME201
ME401
1
1
ME201
ME401
-7-
INSTALLATION
Where to Place the KVM Switch:
The ExsorView KVM Switch is small, portable and designed to
fit right on the desktop. Before installation consider the following
when deciding where to place the KVM Switch;
• whether or not you intend to use the manual port selectors for
port switching
• the length of the cables attached to your keyboard, mouse,
and monitor
• the location of your computers from your console
• the length of the cables you use to connect your computers to
the KVM
Cable Distance Requirements:
For PS/2 computers: VGA signals are best retained when
transmitted up to 25 feet (7.5m). Beyond 25 feet (7.5m),
probability of video degradation increases with an increase in
distance. For this reason, your PS/2 computer should be placed
within 25 feet (7.5m) of the KVM Switch.
Cautions and Warnings:
Avoid placing cables near machines that create electrical noise
such as fluorescent lighting, air conditioning equipment, etc.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
