AmazonBasics B00K6L5EX6 Manual de usuario
B00K6L5EX6
2
English . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . .16
Deutsch . . . . . . . . . . . . .31
日本語 . . . . . . 46
Italiano . . . . . . . . . . . . . .59
Español . . . . . . . . . . . . .73
3
English
Instruction Manual
·
English
AmazonBasics Bluetooth
®
Hands-Free Car Kit
Contents
• Bluetooth car kit
• 3.5mm audio extension cable
• This instruction manual
Bluetooth 4.0 supported
4
Product overview
1 Bluetooth receiver
2 Microphone
3 LED and function button
4 Mounting disc
5 Power plug
6 3.5mm audio output cable
7 3.5mm audio extension cable
5
6
7
4
2
3
1
5
Installing your car kit
Connecting power and audio cables
1. Plug the power plug into your car’s
cigarette lighter socket or a power
socket, then start your car’s engine. The
car charger LED lights green.
2. Plug the 3.5mm audio output cable into
the AUX IN jack on the car’s stereo.
3. Turn on the car’s stereo and set the
stereo’s input to AUX IN (audio in).
6
Installing the Bluetooth receiver
The microphone is built into your Bluetooth
receiver.
You should install your receiver in a location
(like the car’s dashboard) that is:
• Smooth and flat
• Dry and free of dirt
• Easy to reach
• Close enough to the person speaking
that the microphone will pick up the
voice.
Recommended
Avoid
7
1. Peel the adhesive backing off the
mounting disc, then stick the disc to the
mounting surface.
2. Place your Bluetooth receiver against
the mounting disc. Your receiver
magnetically attaches to the disc.
8
Using your car kit
Pairing your receiver and a device
1. Press the function button once to
turn on your receiver. The LED lights red
and you hear a tone.
2. Press and hold the function button
for about 4 seconds to enter pairing
mode. The LED slowly blinks red and
you hear a tone.
3. On your device, locate your Bluetooth
settings and turn on Bluetooth.
4. In Bluetooth Settings, scan for devices if
necessary, then select Amazon_Carkit
from the device’s list. The LED stops
blinking and lights blue, and you hear a
tone. Your device and receiver are
paired and ready to use.
Note: To turn off your receiver, press and
hold the function button for about 7
seconds. The LED quickly flashes red 10
times, you hear a tone, and your receiver
turns off.
9
Pairing another device
You can only pair one device at a time. To
pair a different device, follow the steps in
Pairing your receiver and a device
.
Reconnecting to a paired device
When you turn on your receiver, it
automatically pairs with the last paired
device. If you want to pair with a different
paired device, follow the steps in
Pairing
your receiver and a device
.
Play music
1. Make sure that your device is paired to
the receiver and your device, receiver,
and car stereo are turned on.
2. Start playing music on your device.
3. To start or pause playback, press the
function button.
10
4. To skip to the next song, quickly press
the function button twice.
Note: If you receive a call while music is
playing, the music is automatically paused.
Use as a speakerphone
You can listen to phone calls through your
car’s stereo and speak through your
receiver’s microphone.
If you make a call while paired:
If music is playing, it is paused.
• Use your phone to make the call.
• Press the function button to end
the call.
If you receive a call while paired:
The LED blinks blue and you hear the
ringtone through your car’s stereo speakers.
• To answer a call, press the function
button once. The LED stops
blinking and lights blue.
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios para automóviles de AmazonBasics
AmazonBasics
AmazonBasics B074JK2DWS Manual de usuario
AmazonBasics
AmazonBasics B07T1S3ZMC Instrucciones de funcionamiento y seguridad
AmazonBasics
AmazonBasics B072ZHRDMZ Manual de usuario
AmazonBasics
AmazonBasics B07T3G2CT8 Instrucciones de funcionamiento y seguridad
AmazonBasics
AmazonBasics B07ZKZLCRT Manual de usuario
AmazonBasics
AmazonBasics B00511PS3C Manual de usuario
AmazonBasics
AmazonBasics B00511PTWM Manual de usuario
AmazonBasics
AmazonBasics B0719SSD99 Manual de usuario
