Amazfit Verge Lite Manual de usuario
1Operating Instructions and Functions Navigation
Amazfit Verge Lite features one AMOLED touch screen and one physical button.
1.1 Basic Operations
Slide left and right or up and down: You can switch between different function pages.
Tap and exit: You can tap to enter a specific function page and also operate the tap tips on that page.
You can slide right to quickly return to the upper-level menu after tapping to enter a certain function
page.
Physical button: You can use the button to quickly return to the watch face page. Some exceptions
are the pages of Firmware upgrading, Charging, During workouts, etc.
1.2 Functions Navigation
Pull the watch face down: You can then enter the shortcut control menu, which allows you to
quicklyopen the flashlight, set brightness, control the DND mode, enter the battery saver mode, and
lock the screen.
Slide the watch face left or right: You can then quickly enter the status, heart rate, andAlipay
function pages.
Slide the watch face up: You can then enter the function list.
2Watch Wearing and Charging
Daily wearing: During daily use, it is recommended to wear the watch with a moderate tightness at
a distance two fingers far from your wrist to ensure that the optical heart rate monitor works
properly.
[Wearing the watch]
Wearing during workouts: During workouts, it is recommended to wear the watch comfortably and
ensure a tight fit without slipping. Being too tight or too loose may cause the inaccuracy of detected
workout data, so avoid doing this.
Charging
The watch charger's USB port needs to be plugged into the USB-supported device, such as
socket, PC, power bank.
When placing the watch into the power socket, it's required to keep the watch in a proper
direction and position. Be sure that the metal contacts on the back of the watch are closely
connected to the charging base.
The screen will display the charging reminder when the watch is placed properly.
3Use of Functions
Download theMiFitApp via the mobile phone before using Amazfit Verge Lite. You cannot use the
entire watch functions nor save and upload watch data to your personal cloud account until the
watch is paired by using the Mi FitApp.
3.1 Device Pairing and Unpairing
Download the Mi Fit App from Google Play Store or App Store and register an account or log
in.
Open the Mi Fit App and choose "Profile –My devices –Watch –Amazfit Verge Lite" to
search the device nearby.
Please tap the check-mark when it shows a pairing request on the watch.
After paired, the watch usually needs to be upgraded. Wait for upgrading with patience. With
the mobile network and Bluetooth on, you also need to keep the watch close to the mobile
phone, so as to ensure a successful upgrade.
After the watch is paired and upgraded, its functions are available. Meanwhile, the Mi FitApp
allows for the watch function-specific operations and settings.
To unpair the watch, open the Mi FitApp, tap "Profile –My devices –Amazfit Verge Lite" and
then swipe up and tap the "Unpair" button.
3.2 Control Shortcut Menu
Pulling down on the watch face page can quickly open the control shortcut menu page.
3.2.1 Flashlight
Tapping the flashlight icon can open the flashlight function. The white background on the watch
screen helps light up a small area at night. You can close the enabled flashlight function by sliding
right or pressing the home button.
3.2.2 Brightness adjustment
Tapping on the brightness adjustment button can go to the brightness adjustment settings.
Auto brightness: The watch will automatically adjust the screen brightness upon ambient light.
Manual brightness: You can tailor the screen brightness as you wish.
3.2.3 DND mode
Enable DND: With the DND mode enabled, the watch will not vibrate when receiving any message
pushed by the mobile phone.
Time DND: You can tailor the time period during which the DND mode changes from being
automatically enabled to disabled.
Smart DND: After you fall asleep with the watch, the watch will automatically enable the DND
mode.
Disable DND: The DND mode is disabled, so the watch will vibrate when receiving notifications.
3.2.4 Battery saver mode
The battery saver mode can minimize the power consumption of the watch and improve its
endurance. With the battery saver mode on, the watch can only record steps and sleep time, with
other functions disabled.
To exit the battery saver mode, press and hold the home button.
3.2.5 Lock screen
With the lock screen function on, you can unlock the watch to enter the watch face page only by
using the watch button. This can prevent any error caused by mistouch.
3.3 Replace the Watch Face
To replace the watch face on the watch: Press and hold the watch face page for 2s, or go to "Settings
–Watch face settings", slide left and right to scan the watch face, and tap one to complete
replacement.
To replace the watch face on the app: Tap "Profile –Amazfit Verge Lite –Watch face settings" to
download more watch faces on the Watch Face Store.
3.4 Alipay
BindAlipay
Slide from the watch face page to theAlipay binding page. Then the watch will display the QR
code for binding. Open the AlipayApp on the mobile phone and scan the QR code on the
watch by using Alipay's "Scan QR Code" function.
During the binding, the watch will display the binding process. When the binding is done, the
watch will display a payment code.
Notes: Before bindingAlipay, you should check whether the version ofAlipayApp is 10.1.5 or later.
During the binding, you should ensure the Bluetooth and network are on and the watch is connected
to the mobile phone.
Use Alipay to pay
Slide left and right on the watch face page and go to theAlipay page. By default, a QR code
appears and is scanned by the barcode scanner to complete payment.
Some barcode scanners cannot scan a QR code, so slide up on theAlipay page to display a
barcode.
Otros manuales para Verge Lite
2
Tabla de contenidos
Otros manuales de Mirar de Amazfit
Amazfit
Amazfit GTS 2e Manual de usuario
Amazfit
Amazfit Verge Manual de usuario
Amazfit
Amazfit GTS 2 mini Manual de usuario
Amazfit
Amazfit Neo Manual de usuario
Amazfit
Amazfit A2040 Manual de usuario
Amazfit
Amazfit GTR 4 Manual de usuario
Amazfit
Amazfit Band 2 Manual de usuario
Amazfit
Amazfit T-Rex Pro A2013 Manual de usuario
Amazfit
Amazfit Bip U Pro Manual de usuario
Amazfit
Amazfit T-Rex 2 Manual de usuario
Amazfit
Amazfit A2013 Manual de usuario
Amazfit
Amazfit T-Rex Ultra Manual de usuario
Amazfit
Amazfit Bip 3 Manual de usuario
Amazfit
Amazfit Pace Manual de usuario
Amazfit
Amazfit Stratos 3 Manual de usuario
Amazfit
Amazfit T-Rex Manual de usuario
Amazfit
Amazfit GTR Guía de instalación
Amazfit
Amazfit Stratos 3 Hoja de especificaciones
Amazfit
Amazfit GTR Mini Manual de usuario
Amazfit
Amazfit Stratos Manual de usuario
