ALZA H885 Wi-Fi Manual de usuario
H885 Wi-Fi
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –25
Čeština
26 –48
Slovenčina
49 –72
Magyar
73 –96
Deutsch
97 –121
3
Dear customer,
Thank you for purchasing our product. Please read the following
instructions carefully before first use and keep this user manual for
future reference. Pay particular attention to the safety instructions. If
you have any questions or comments about the device, please contact
the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Introduction
Congratulations on the purchase of your new device. You have selected
a high-quality product. The operating instruction is one constituent of
this product. It contains important information about safety, use and
disposal.
Before using the product, familiarize yourself with all operating and
safety instructions. Use this product only as described and only for the
specified areas of application.
Copyright
This documentation is subject to copyright protection.
Any copying or reproduction, including extracts thereof, and the
reproduction of images (even in a modified state), is only permitted with
the written authorization of the manufacturer.
4
Intended Use
This device is intended only for recording digital photos and videos,
particularly for observing wildlife. It is not intended for any other use or
for uses extending beyond those stated. This device is not intended for
use in commercial or industrial environments.
The manufacturer accepts no responsibility for damage caused by
failure to observe these instructions, improper use, incompetent
repairs, making unauthorized modifications or for using unapproved
replacement parts. The operator alone bears liability.
When the equipment will be placed in the outdoor filming, rapid
changes in the weather could lead to error record.
Safety
Please read below safety precautions carefully before using the camera.
•Do not try to disassemble the product case. Only authorized
technician can repair the product.
•The camera will be hot after using for too long time. This is
normal.
•Please use the accessory provided by our factory.
Important
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation
5
Camera Overview
1.Display Screen
2.Up/Video Button
3.Shot Button
4.Right Button
5.OK Button
6.Speaker
7.Menu Button
8.Left Button
9.Playback Button
10.Down/Photo Button
11.Micro SD Card Slot
12.AV Jack
13.USB Jack
14.OFF-TEST-ON Mode Button
15.Infrared LEDs
16.Lens
17.Front Motion Sensor
18.Side Motion Sensor
Power Supply
Please install batteries before using the camera.
Open the camera case and remove the battery cover. Install 8 pieces of
1.5V AA batteries. Please make sure the electrode is correct.
6
Inserting Storage Media
Please prepare a Micro SD card and insert it into the camera for saving
more files. Before recording, please format the memory card first.
Support Micro SD card, up to 256GB. It is suggested to use at least class
6 or above high-speed card.
To avoid malfunction, the memory card should be far away water,
strong vibration, dust, hot source, and direct sunlight.
Do not insert the memory card forcibly. Please refer to the marking on
the camera.
For the first-time use, please wait for the memory card temperature
reach the ambient temperature. The camera will be short-circuit
influenced by environment temperature and humidity. Please notice
protection for the camera when using it outdoor.
If the capacity of memory card is full, the camera will stop recording
automatically and the LEDs will go out.
Press the edge of the card gently to pop-up the TF card.
Close the
battery
cover
7
Basic Operation
Turn On and Off The Camera
Switch the Mode Button to “Test/On” to turn on the camera.
Switch the Mode Button to “Off” to turn off the camera.
System Setup
Switch Mode Button to “Test”, then you can set the system parameters.
1. Press Video/Photo button to switch between the two modes.
2. Press Menu button to open the setup menu.
3. Press Up/Down button to scan all menu. Then press OK button to
enter the options interface.
4. Press Up/Down button to scan all options. And press OK button to
confirm options.
5. Press Menu button again to turn back to last menu or exit the setup
menu.
Setup menu and functions are as below:
Mode
Set the working mode. In photo mode, the camera just takes pictures. In
Video mode, the camera just records video. In photo and video mode,
the camera will take a photo first, then start to record video.
Options: Photo/Video/Photo & Video.
Photo Resolution
Set the still image resolution.
8
Options:
32MP (6480x4860P)
20MP (5200x3900P)
16MP (4608x3456P)
12MP (4000x3000P)
8MP (3264x2448P)
5MP (2592x1944P)
3MP (2048x1536P)
1MP (1280x960P)
Photo Series
Set the photo number of continuous shooting. In photo mode, the
camera will take photos continuously.
Options: 1 photo / 2 photos in series / 3 photos in series / 10 photos in
series.
Video Resolution
Set the video resolution. The bigger the resolution is, the longer the
video time can be stored.
Options: 3840x2160P / 2688x1520P 20fps / 1920x1080P / 1280x720P /
1280x720P 60fps / 848x480P / 720x480P / 640x480P / 320x240P
TL Video Resolution
Set the resolution of time lapse video.
Options: 5200x3900P / 4608x3456P / 4416x3312P / 4000x3000P /
3648x2736P / 3264x2448P / 3072x2304P / 2592x1944P / 2048x1536P
9
Video Length
Set the duration of recording a video clip. The shortest time is 3
seconds, and the longest time is 2 minutes.
Options:3 seconds~2 minutes.
Audio Recording
Open this function, the camera will record audio when recording video.
Options: On/Off
Shot Lag
Set the time of delay shooting when the camera detects the motion.
Within the selected time, the camera will not record any image or video.
It can avoid storing too much same events and save more capacity.
Options: 5 seconds~60 minutes.
Side Motion Sensors
Open/close the side motion sensors.
Options: On/Off
Sensitivity Motion Sensors
Set the sensitivity of the sensors. Environmental impact is small indoors,
you can choose “Low”. In outdoor, choose “Middle“ in normal condition.
Choose “High” if the environment impact is huge outdoors. The
temperature can also influence the sensor sensitivity. “High Sensitivity”
applies to mild environment. “Low Sensitivity” applies to cold
environment.
Options: Low/Middle/High
10
Target recording time
Set the target recording time. As shown in below picture, you can set
the start and stop time. The camera will work just in the stated time slot.
In other time, the camera will keep in standby state.
Options: On/Off
Time Lapse
In Time lapse menu, there are three options as below.
[Normal]: The camera will take pictures automatically as per set time
interval. For example, set the interval time to 1 hour, the camera will
take a photo each hour. If you want to observe that a plant blooms, the
camera will take 24 photos in 24 hours to record the whole process of
blooming.
[TL Video]: You can set the interval time. The time range is from 1
second to 24 hours. For example, set the interval to 1 hour, the camera
will take a photo each hour. If the camera works for 24 hours, there will
be 24 photos. These photos will be converted into a video.
[Off]: Close the time lapse function.
Language
Set the language display on screen.
Options: English / German / Danish / Finnish / Swedish Spanish / French
/ Italian / Dutch / Portuguese / Simplified Chinese /Traditional Chinese /
Japanese.
Endless Capture
Set the camera to record video in loop.
Options: On / Off.
Tabla de contenidos
Idiomas:
Otros manuales de Cámara digital de ALZA
