Altigen Smart Station Manual de usuario
SmartStation
User Manual
For iFusion documentation in other languages and general support information, visit
http://www.thefusionphone.com
Copyright © 2011
All rights reserved. No part of this User’s Manual may be reproduced or copied by any
means without the consent of the manufacturer. The information and specification in this
document may change without prior notice.
Bluetooth trademarks are owned by Bluetooth SIG, Inc. and used under license.
FaceTime is a trademark of Apple, Inc.
iFusion SmartStation User Manual i
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1. Choosing a Bluetooth mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Preparing the iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Preparing the iFusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Pairing the iPhone with the iFusion Station . . . . . . . . . . . . . . . . . . . 6
Making and answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching an iFusion call to the iPhone . . . . . . . . . . . . . . . . . . . . . . . . 7
Muting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Playing music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Synchronizing data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using iFusion with FaceTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Determining your Firmware version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ii iFusion SmartStation User Manual
iFusion SmartStation User Manual 1
Introduction
Congratulations on your purchase of iFusion.
This manual shows you how to pair your iPhone with the iFusion, make and receive calls,
listen to music, charge your iPhone, and synchronize iPhone data with your computer.
Front view
1Hook switch Handset on-hook, off-hook switch.
2
Bluetooth button – Touch and hold (for 5 seconds) to
enter pairing mode.
Rapid blinking: Pairing
Slow blinking: Reconnecting
Solid light: Connected
3
Mute button – Mutes the handset or speaker.
To unmute the call, touch it again.
Red light: Muted
4Speaker button – Moves the audio to the speaker.
Green light: Hands-free mode (speaker is enabled)
5Volume Down button – Lowers the volume.
Rapid blinking: Minimum reached
6Volume Up button – Raises the volume.
Rapid blinking: Maximum reached
7Docking
cradle
Where you connect the iPhone to the iFusion. While
docked, the iPhone charges.
2 iFusion SmartStation User Manual
iFusion SmartStation User Manual 3
Back view
1Power port Connects the power cord.
2Mini USB port Connects the iFusion to a computer. Use a mini
USB male to standard USB male cable.
3Stereo 3.5mm
audio jack Connects external speakers (for music).
4Handset port Connects the handset cord to the iFusion.
5Cable guide Holds the handset cord in place, so that the
iFusion does not wobble on the desk.
4 iFusion SmartStation User Manual
Setup
You will need to pair your iPhone with the iFusion. iFusion is compatible with Bluetooth
2.1+EDR. The iFusion provides Bluetooth support for iPhones up to approximately 10
meters (33 feet) away. Direct line-of-sight provides a longer range.
After the devices have been paired, the iFusion saves the connection details in memory.
Multiple iPhones can be paired with the iFusion, but only one iPhone can be actively con-
nected at a time.
For optimal Bluetooth performance with the iFusion Station:
• Keep the iPhone docked in the iFusion cradle.
• Position the iFusion away from radio frequency (RF) emission sources such as lap-
tops or other electronic equipment, because such devices can interfere with Blue-
tooth communications.
Note: If more than one Bluetooth device is connected to the iPhone, it may take several
seconds for the iPhone to connect the voice path to the iFusion for incoming calls.
For this reason, we recommend that you disconnect all other bluetooth devices
from the iPhone.
1. Choosing a Bluetooth mode
Before you pair your iPhone with the iFusion Station, choose how you prefer it to work.
You can change between these work modes as needed, by re-pairing the devices.
•Bluetooth Docked mode (recommended) – iFusion operates only when you dock
the iPhone in the iFusion cradle.
Start this mode by docking the iPhone in the iFusion cradle before you pair the
devices.
When you remove the iPhone from the cradle, the Bluetooth connection between
the devices will temporarily disconnect. To reconnect, return the iPhone to the cra-
dle.
•Bluetooth Undocked mode – iFusion operates whenever the iPhone enters the
iPhone’s Bluetooth range. In other words, the iPhone does not have to be docked in
the iFusion cradle in order to work.
iFusion SmartStation User Manual 5
Start this mode by leaving the iPhone out of the cradle while you pair the two
devices.
When you enter the iFusion Bluetooth range while on a voice call, the call’s audio
will remain on your iPhone (there may be a momentary interruption as the iPhone
attempts to push the call to the iFusion).
If you enter the Bluetooth range while listening to music or to a voicemail message,
the audio will automatically switch to the iFusion.
2. Preparing the iPhone
Place your iPhone in the cradle (for Bluetooth Docked mode).
On the iPhone, go to Settings > General > Bluetooth.Turn on Bluetooth. The iPhone is
now discoverable, and it searches for other Bluetooth devices nearby.
6 iFusion SmartStation User Manual
3. Preparing the iFusion
Touch and hold the Bluetooth button on the iFusion for three to five seconds,
until the button blinks rapidly.
The iFusion is now in pairing mode.
Note: If the pairing process is not completed within 60 seconds, the Bluetooth button
blinks slowly again, indicating that the process was cancelled. Repeat step 3.
4. Pairing the iPhone with the iFusion Station
Once the iFusion is listed on the iPhone screen, tap iFusion xxxxxx to pair the two
devices. On the iPhone, the status changes from Not Paired to Connected when the
Bluetooth connection has been made.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
