Altec IMW575 Manual de usuario
Introduction
Thank you for purchasing the Altec Lansing Life Jacket IMW575 Waterproof Bluetooth Speaker. You can use
this speaker to listen to audio wirelessly from devices such as smart phones, computers, iPods, tablets and
most other Bluetooth sound sources. Please read this manual carefully FIRST in order to get the most out of
your speaker. Please note the Life Jacket speaker is rated IPX67 waterproof, shockproof, dustproof. The Life
Jacket can be submerged under water 3 feet for up to 30 minutes but the waterproof cover on the back must
be fully closed otherwise the warranty is void.
Important Safety Precautions
When using your speaker basic safety precautions should always be followed, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.
2. Never expose your speaker to high temperatures.
3. In order to avoid the risk of electric shock, never attempt to open your speaker or repair it without the
assistance of certified professionals.
4. If you do not intend on using your speaker for an extended period of time, please unplug the AC power
adapter from the power outlet and also disconnect it from your speaker.
Features
-Seamlessly stream music from your iPad, iPhone, Android device, laptop, tablet or other Bluetooth enabled
device.
- Waterproof, Dustproof, Shockproof, Sandproof
- Spoken Caller ID
- Voice recognition speakerphone
- Power Bank
Package Contents
1. IMW575 Life Jacket Portable Waterproof Bluetooth Speaker
2. Carry Pouch
3. AC Adapter
4. USB Cable
5. 3.5mm Auxiliary Cable
6. Owner’s Manual with Warranty Information
Technical Specifications
- Battery Life: up to 16 hours
- AC Adaptor: 5V, 1A
- Power Adapter Input Rating: 100~240V, ~50/60Hz, 0.18A
Charging Your Speaker
1. Connect one end of the included AC power adapter cable to the IMW575 DC input jack. Then plug the other
end of the AC adapter into a suitable power outlet to recharge your speaker’s internal rechargeable battery.
NOTE: The internal battery of your speaker takes approximately four hours to charge when completely drained.
2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off
when your unit is fully charged.
Remarks : The USB port is for charging use only, no data transmission functionality
Understanding the LED Status Indicators
Power and Bluetooth Indicator Light
Blinking Blue LED = Bluetooth not connected. (Ready to pair.)
Solid Blue LED = Bluetooth connected.
Charging Indicator Lights
Solid Orange LED = Charging
Orange LED OFF = Charged Full.
Powering Your Speakers ON & OFF
1. Press and hold the “POWER” button for 2 seconds to turn on the unit. The Bluetooth LED light will start
blinking slowly and the speaker will say, “Powering On”. Now you are ready to pair your audio source with your
IMW575 speaker.
2. Press and hold the “POWER” button for 2 seconds to turn off the unit. The speaker will say, “Powering Off”
Power Saving Mode
The IMW575 will enter a power saving mode if no audio is played for 30 minutes. Press and hold the power
button for two seconds to wake the IMW575.
Setting Up Your IMW575 Bluetooth Music Receiver
Bluetooth Device Compatibility
Your speaker connects with all Bluetooth devices that support the A2DP profile including iPads, iPhones, iPod
touches, and most smart phones, laptops and tablets.
Pairing a Bluetooth Device with Your Speaker
Press and hold the “POWER” button for two seconds to turn on the unit. The Bluetooth LED light will start
blinking slowly. Now you are ready to pair your device with your IMW575 speaker.
1. Go to the Bluetooth Manager of your Bluetooth device.
2. Search Bluetooth devices and select “IMW575” to start connecting.
3. Enter “0000” if your device asks for the PIN code.
4. Once paired, the unit will say, “You are now paired, enjoy” and the Blue LED light will turn on steadily.
5. Although the unit can only stream audio from one device at a time, it is capable of being paired with up to
eight devices. This means that you only have to enter the PIN code one time for each device.
Connecting a Paired Bluetooth Device
1. You should only need to pair your Bluetooth device with your speaker one time.
2. The next time your Bluetooth device and the unit are in range of each other, and the Bluetooth feature is
turned on, they should automatically connect.
3. The unit will only automatically connect to the last Bluetooth device it was connected to.
4. If your paired device does not automatically connect, navigate to the Bluetooth menu on your device and
select “IMW575” from the list.
Note: Your IMW575 can pair with and remember multiple Bluetooth devices; however it can only connect with
one device at a time. For more detailed instructions, please visit the FAQ section.
Playing Audio from Your Bluetooth Device
1. Once your media device is connected to the unit, simply start playing the music, movie or game and all the
audio will automatically be played through IMW575.
2. Press “POWER” to play/pause the audio.
3. Press + or - to adjust the volume level of the unit.
4. Keep in mind that the IMW575 has a 30 foot Bluetooth wireless range.
Note: The volume controls on your media device work separately from the volume controls on IMW575.
When there is an incoming call:
1. Press the “Power” button to pick up the call or say “Answer” or “Yes”.
2. To reject the call say “No”.
3. During the call: Press the “Power” button again to hang up the call.
To Disconnect Your Bluetooth Device
Turn off the connected device or press Volume “+” and “-“ at same time to disconnect the Bluetooth device.
*The Blue Bluetooth indicator flashes slowly after disconnect the device.
Reconnecting Your Device
If you move out of range or turn off the Bluetooth feature on your device, the unit will disconnect from your
device. To reconnect, simply access the Bluetooth Manager on your device and select IMW575.
You will not be asked to enter the PIN code again.
Out of Range or Lost Signal
If the music device is out of range (beyond 30 feet) of the unit or if there is something blocking the Bluetooth
signal, the LED light will flash slowly to indicate that the Bluetooth connection with the music device has been
lost.
To avoid a lost connection:
1. Move the music device back into range (within 30 feet), and/or make sure there’s a clear line of sight
between the unit and the Bluetooth device.
2. If the connection is lost, the connection will need to be reestablished. Follow the directions under
“Reconnecting Your Device”.
NFC
To pair the IMW575 with NFC enabled devices, hold your NFC enabled phone directly against the IMW575's
“Wireless Check in for NFC” mark for 2 seconds. Once the pairing is successful, the speaker will make a sound
to confirm. (Some devices may ask for confirmation from the user.)
Charging a Smart Phone or other MP3 Players
If your smart phone or MP3 player is equipped with a charging cable that plugs into a USB connector, the
IMW575 can most likely charge your device. Plug the charging cable that came with your device into your
device and plug the USB connector into the back of the IMW575 (you will need to open the waterproof cover).
The IMW575 does not need to be plugged into a power outlet in order to recharge your device however, using
the IMW575 to recharge your device will reduce the battery life until the next time you recharge the IMW575.
Playing music from a non-Bluetooth device
The IMW575 includes a 3.5mm Auxiliary Cable. To listen to music from a non-Bluetooth device, plug on end of
this cable into the Aux In jack located on the back of the IMW575 (you will need to open the waterproof cover).
Plug the other end of the cable into the 3.5mm Headphone jack of your non-Bluetooth device. Set the volume
on the device to ¾ volume and begin playing music. Adjust the volume on the IMW575 to a suitable listening
level.
Waterproof Feature
The IMW575 has an IPX rating of 67 meaning it is waterproof at a depth of 3 feet or approximately 1 meter for
up to 30 minutes. You MUST have the waterproof cover on the back of the IMW575 closed and fully sealed to
achieve this level of waterproof. Failure to do this voids the warranty.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Oradores de Altec
Altec
Altec 421-8H LF SPEAKER Manual de usuario
Altec
Altec 405T CEILING SPEAKER Manual de usuario
Altec
Altec 425-8A LF SPEAKER Manual de usuario
Altec
Altec 405-8G CEILING SPEAKER Manual de usuario
Altec
Altec IMW395 Manual de usuario
Altec
Altec XLJACKET IMW645 Manual de usuario
Altec
Altec 291-16B HF DRIVER Manual de usuario
Altec
Altec iMW555 Manual de usuario
Altec
Altec IMW385 Manual de usuario
Altec
Altec SOLOJACKET IMW375 Manual de usuario
Altec
Altec inAir MA5000 Manual de usuario
Altec
Altec iMW555 Manual de usuario
Altec
Altec CQL1413-B Manual de usuario
Altec
Altec AL-SND05X-001/MUSEO Manual de usuario
Altec
Altec 416-8A LF SPEAKER Manual de usuario
Altec
Altec 604E DUPLEX SPEAKER Manual de usuario
Altec
Altec 19 Walnut Manual de usuario
Altec
Altec 291-16A HF DRIVER Manual de usuario
Altec
Altec 731A HF DRIVER Manual de usuario
Altec
Altec AL-SND064-001 Manual de usuario
