Altec IMW395 Manual de usuario

Item # IMW395

Owner’s Manual

FCC ID:XKK-IMW395

Introduction

Thank you for purchasing the Altec Lansing IMW395 Bluetooth Speaker. You can use this

speaker to listen to audio wirelessly from devices such as smart phones, computers, iPods, tablets and most

otherBluetooth sound sources while you are taking a shower. Please read this manual carefully FIRST in order

to getthe most out of your speaker.

IMPORTANT NOTE: The iMW395 is an IPX5 Splash Resistant certified device. Please note that the splash

resistant cover must be placed securely over the USB charging jack at all times while using your speaker in the

shower or near water. Failure to do so may result in damage to your speaker which will not be covered by the

device’s one year warranty.

Important Safety Precautions

When using your speaker basic safety precautionsshould always be followed, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.

2. Never expose your speaker to high temperatures.

3. In orderto avoid the risk of electric shock, never attempt to open your speaker or repair it without the

assistance of certified professionals.

4. If you do not intend on using your speaker for an extended period of time, please unplug the charging

cable from any power outlets and also disconnect it from your speaker.

Features

-Seamlessly stream music from your iPad, iPhone, Android device, laptop, tablet or other Bluetooth enabled

device.

- Bluetooth Specification V4.0 system

- Water resistance

- Spoken Call ID

Package Contents

1. IMW395 Bluetooth Speaker

2. Micro USB Charging Cable

3. Owner’s Manual with Warranty Information

Technical Specifications

- Net Weight: 150g

- Battery Life: up to 5 hours

- AC Adaptor: 5V, 500mA

- Power Adapter Input Rating: 100~240V, ~50/60Hz, 0.2A

- RF Frequency Range: 2.402-2.480GHZ, 2.4G ISM band

- Bluetooth Range: 10M

A Quick Look at Your Device

1. Volume Up

2. MF Button

3. Volume Down

4. USB Charging Jack

5. NFC

Charging Your Speaker

1. Connect one end of the included USB Charging Cable to the USB Charging Jack. Then plug the other end

of the USB Charging Cable into an available USB port on your computer in order to recharge your speaker’s

internal rechargeable battery.

NOTE: The internal battery of your speaker takes approximately two tothree hours to charge when completely

drained.

2. When charging, a red LED light will illuminate. The red light will turn off when your unit is fullycharged.

Understanding the LED Status Indicators

1. Bluetooth Connected: Once your speaker is paired to a Bluetooth audio source, a blue LED light flashes

once every seven seconds.

2. Incoming Call:A blue LED light flashes twice every two seconds to indicate that you are receiving an

incoming call.

3. Low Power Alert: A red LED light will blink and you will hear a beeping noise every minute when your

speaker’s battery power is low and needs to be recharged.

4. Charging: When charging, a red LED light will illuminate. The red light will turn off when your unit is fully

charged.

5. Powering On: When powered on, there’s a quick blue LED flash, then turn to blue and red LED lights

flashing alternately.

6. Powering Off: When powered off, a quick red LED flash.

7. Pairing: When your speaker is readyto pair with a Bluetooth audio source, red and blue LED lights will flash

alternately.

Powering Your Speakers ON & OFF

1. To power on your speaker, press and hold the MF button. You will hear an audio confirmation saying

“POWERING ON”, and blue and red LED lights will flash alternately after an initial quick blue LED light flashes.

2. To power off yourspeaker, press and hold the MF button. You will hear an audio confirmation saying

“POWERING OFF”

Note: Your speaker will power off automatically if left idle for ten minutes.

Adjusting Volume

When listening to audio, press the VOLUME UP or VOLUME DOWN buttonsto increase or decrease the

volume of your speaker. Press and hold the VOLUME UP or VOLUME DOWN buttons to go to the next or

previous track in a playlist or album.

Setting Up Your IMW395 Bluetooth Music Receiver

Bluetooth Device Compatibility

Your speaker connects with all Bluetooth devices thatsupport the A2DP profile including iPads, iPhones, iPod

touches, and most smart phones, laptops and tablets.

Pairing a Bluetooth Device with Your Speaker

Press and hold the MF button in orderto power on your speaker. You will hear an audio confirmation indicating

that your speaker is powered on. Make sure your Bluetooth audio source is within a fewfeet of yourspeaker

and the Bluetooth settings have been turned on. Your speaker will automatically prepare to pair, with a red and

blue LED light will flash alternately.

Now you are ready to pair your device with your iMW395 speaker.

1. Go to the Bluetooth Manager of your Bluetooth device.

2. Search Bluetooth devices and select “iMW395” to start connecting.

3. Enter “0000” if your device asks for a PIN code.

4. An audio confirmation will indicate when yourspeaker is paired with your Bluetooth audio source. Once

paired, a blue LED light flashes once every 7 seconds.

Bluetooth Connecting via NFC

1. Go to the Bluetooth Manager of your Bluetooth device, and make sure the NFC function is activated.

2. Hold your phone close to your speaker’s NFC spot.

3. An audio confirmation will indicate when yourspeaker is paired with your Bluetooth audio source. Once

paired, a blue LED light flashes once every 7 seconds.

Connecting a Paired Bluetooth Device

1. You should only need to pair your Bluetooth device with yourspeaker one time.

2. The next time your Bluetooth device and your speaker are in range of each other, and the Bluetooth feature

is turned on,they should automatically connect.

3. Your speaker will only automatically connect to the last Bluetooth device it was connected to.

4. If your paired device does not automatically connect, navigate to the Bluetooth menu on your device and

select “iMW395” from the list.

Note: Your iMW395 can pair with and remember multiple Bluetooth devices; however it can only connect with

one device at a time.

Playing Audio from Your Bluetooth Device

1. Once your audio source is paired with your speaker, all the audio will automatically be played through your

speaker.

2. Press the MF BUTTON to play/pause audio.

3. Press VOLUME UP or VOLUME DOWN to adjust the volume level of the unit.

4. Keep in mind that the iMW395 has a 30 foot Bluetooth wireless range.

5. Press and hold the VOLUME UP button to advance to the next track, or press and hold the VOLUME DOWN

button to go back to the previous track. (This feature may not be available on all audio devices.)

Note: The volume controls on your audio source work separately from the volume controls on your speaker.

When there is an incoming call:

1. Press the MF BUTTON to pick up the call.

2. Press and hold the MF BUTTON to reject the call.

3. During a call: Press the MF BUTTON again to end the call.

4. If you have a phone paired to yourspeaker, and the phone is in standby mode or playing music, press and

number you dialed.

5. When using your speaker to take a phone call, you can press and hold the MF BUTTON for three seconds

to transfer the call back to your phone. You can press and hold the MF BUTTON again for three seconds to

transfer the call back to your speaker.

6. During a call, press and hold the VOLUME DOWN button to switch off the microphone on the speaker. You

will hear a beeping sound, and anything you say will not be audible to the person you are talking to. The same

operation can switch the microphone back on.

hold the VOLUME UP for 3 seconds to call the last

FAQ: Frequently Asked Questions

1. I am having Bluetooth pairing or connection problems, what do I do?

A.) Make sure your Bluetooth device is turned on and is on the discoverable mode. (Red and blue LED lights

will flash alternately to denote that the speaker is ready to accept connections.)

B.) Make sure your speaker is not already connected with another device (easiest way to determine this is if

you see a blue LED lightflashing once every seven seconds in the center of the speaker).

C.)If you want to connect with another device, disconnect (you don’t need to unpair) the previously connected

device and try pairing again.

D.) If you had already paired your device and connection was successful prior but now your connection is

failing or getting a connection error, unpair /forget device (for IOS devices) from your phone or mp3 player and

pair again. Now try to connect.

E.) If you are pairing the first device to the speaker, after you turn on the speaker and when you see red and

blue LED light flashing alternately, select iMW395 from the list of discovered Bluetooth devices to pair. If

prompted for a password/pass code, enter “0000”.

F.) When you turn ON the speaker it automatically tries to connect tothe last paired device, if it cannot find the

last paired device and you have paired multiple devices it will try to establish connection with the previously

paired devices. If none of the paired devices are available to connect it will turn to a discoverable mode and

this can take from 5 to 90 seconds (depending upon the number of previously paired devices and their

operating system). If you are trying to establish a connection during this time you will receive an error. Kindly

wait for approximately 90 seconds, scan your MP3 player or phone to discover new devices in the Bluetooth

manager screen of your device and select iMW395 from that list to pair. If prompted for a password/pass code

enter “0000”.

Tabla de contenidos

Otros manuales de Oradores de Altec

Altec

Altec 409-8C CEILING SPEAKER Manual de usuario

Altec

Altec IMW385 Manual de usuario

Altec

Altec SOLOJACKET IMW375 Manual de usuario

Altec

Altec 421A LF SPEAKER Manual de usuario

Altec

Altec 619-8A CEILING SPEAKER Manual de usuario

Altec

Altec 419-8B LF SPEAKER Manual de usuario

Altec

Altec 616-8A CEILING SPEAKER Manual de usuario

Altec

Altec inair 5000 Instrucciones de montaje

Altec

Altec 425-8A LF SPEAKER Manual de usuario

Altec

Altec 405T CEILING SPEAKER Manual de usuario

Altec

Altec 418B LF SPEAKER Manual de usuario

Altec

Altec IMW455 Manual de usuario

Altec

Altec 288-16G HF DRIVERS Manual de usuario

Altec

Altec imw855 Manual de usuario

Altec

Altec iMW555 Manual de usuario

Altec

Altec CQL1413-B Manual de usuario

Altec

Altec 291-16B HF DRIVER Manual de usuario

Altec

Altec IMW575 Manual de usuario

Altec

Altec 291-16A HF DRIVER Manual de usuario

Altec

Altec 416-8A LF SPEAKER Manual de usuario

Altec

Altec 403T CEILING SPEAKER Manual de usuario

Altec

Altec 405-8G CEILING SPEAKER Manual de usuario

Altec

Altec AL-SND064-001 Manual de usuario

Altec

Altec inAir MA5000 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario