Alltec Network Evolution Manual de usuario
Evolution
User Manual
Alltec Network, Butts Business Centre, Fowlmere, Royston, Herts, SG8 7SL.
Tel 01763 208222 Fax 01763 208906
[email protected] www.alltec.co.uk
GUARANTEE Page 3
WARRANTY Page 4
SCOPE Page 5
WARNINGS / HEALTH & SAFETY Page 6 / 7
DO’S & DON’T ’ S Page 8
SAFETY DEC A L S Page 9
LIFTING AND HANDLING INSTRUCTIONS Page 10
SETTING AND OPERATION Page 11 / 12 / 13
MAINTENANCE INSTRUCTIONS Page 14
PARTS ORDERING L I N E Page 15
REAR OPERATION Page 16
PANEL OPERATION Page 17
FRONT OPERATION Page 18
CERTIFICATE OF QUALITY ASSURANCE Page 19
YOUR NOT E S Page 20
INDEX
1. WELCOME Page 2
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
ALLTEC™ Evolution 2
Congratulations!
You are now the proud owner of an
ALLTEC™ Evolution
carpet and upholstery cleaning
machine, and you have every reason to be proud – for all the ALLTEC™ models embody good
design, reliability and a mechanical specification second to none.
Your ALLTEC™ Evolution machine is 100% British made – in fact we manufactured it in our
purpose-built workshops at Butts Farm, Fowlmere. We are proud that your machine is not
mass-produced, but is hand built in an organised and efficient environment. We are also proud
of the dedicated team of professionals who build them.
We aim to make the very best machines possible – and we do this by using only finest quality
components, and by employing the safest and most sound methods of construction. Unlike
most of our competitors that sell cheaper foreign machines with their ‘own label’ on them or the
UK manufacturers, who restrict access to their production line - we positively encourage you
Our concern for ‘getting it right’ is backed up by the Certificate of Quality Assurance that follows
every machine through every stage of its manufacturing, this is quite an elaborate and detailed
procedure. Once we have finished the manufacturing stage of the machine it is then put
through a series of tests to ensure all systems are fully operational, they are then double-
checked by another service engineer to ensure that they are fault-free when they leave our
workshops. Only then, when the machines are fully double-checked, cleaned and polished are
they allowed into our showroom.
The final check is made by YOU. When you collected your Alltec Evolution we offered free basic
training so YOU could check over and run every part yourself. By doing this we check once
again that the machine you have just bought is in perfect working order. If you had the machine
sent by carrier please double check all working parts before you go out cleaning with it to
familiarise your self with its operations.
We felt it important to include this page in the manual so you would be aware of the importance,
we as a company attach to craftsmanship, quality control, and above all to ensuring customer
satisfaction with the finished product.
We’re sure you’ll be delighted with your new ALLTEC™ Evolution machine as so many of our
customers already are.
Please read the following manual carefully, so that
you get the very best out of using your new machine
to come and inspect out workshops - and that’s any day, any time.
ALLTEC™ Evolution
3
GUARANTEE
We guarantee our ALLTEC™ Evolution machine for a period of one
year or 500 hours, which ever is sooner, from the recorded date of purchase.
During that time we undertake to exchange or repair free of charge any part found
to be defective, provided that:-
NB: Labour is not included unless the machine (or failed part) is returned carriage and
insurance paid both ways to our Service Department at Butts Farm. Prior
telephone notice is required of the customer’s intention to return parts/machines
and a note detailing the problem should be enclosed.
Excluded from the guarantee are consumables such as brushes, filter, seals,
washer and hoses.
Parts replaced under guarantee are themselves guaranteed only for the remaining
unexpired portion of warranty and not for a new term.
Water pumps and vacuum motors supplied after the initial one-year warranty
period are subject only to a three-month term of warranty.
How Our Warranty System Works
Our warranty system is simple and fair. It enables 99% of repairs to be speedily
carried out by the operator, and it works like this.
1. In the event of a malfunction, contact our Service Manager on (01763) 208222
and advise him of the symptoms and nature of the problem
2. Having diagnosed the problem, the Service Manager will respond by booking
your machine in for repair here or by sending you the necessary replacement
parts for you to fit yourself (the parts will be charged to your account). All parts
are easily replaced using the most basic of tools, so within 24 hours you should
be back in business.
3. Once your machine is working we ask you to return faulty parts to us, but do
please insure for appropriate amount before posting, as it is your responsibility
to ensure their safe return. On receiving the faulty parts a credit will go on your
account.
The machine has been used in accordance with the instruction manual
The machine has not been subject to miss-use, frost damage, neglect or accident
No chemicals, other than those supplied for use in hot water extraction machines
have been used. Use of other agents could cause damage to the machine and will
invalidate the guarantee.
ALLTEC™ Evolution 4
MACHINE REGISTRATION & SERVICE DOCUMENT
PURCHASE CHECKED IN DOUBLE CHECKED AT WARRANTY WARRANTY
DATE WORKSHOP BY SALE/DESPATCH BY START DATE EXPIRY DATE
Name:………………………………………………………. Serial No:……………………………………
Trading name:……………………………………………… Make:………………………………………...
Address:……………………………………………………. Model:……………………………………….
……………………………………………………………… Colour:……………………………………….
……………………………………………………………… Vac Motors:………………………………….
……………………………....PostCode:…………………… Water Pump:…………………………………
Tel No:………………………Fax No:…………………….. Calibration:…………………………………..
HEATER LEAD TESTS MOTOR LEAD TESTS SERVICE HISTORY
DATE INSULATION EARTH
DATE INSULATION EARTH
DATE SERVICE PLACE
URGENT WARRANTY REGISTER
To register your machine for 12 months warranty from the purchase date, you must fill in and
return the slip below within 28 days of purchase.
Return to: - Alltec Network, Butts Farm, Fowlmere, Nr Royston, Herts, SG8 7SL.
Name:………………………………………………………. Purchased From:…………………………….
Trading name:……………………………………………… Date:…………..… Serial No:……………….
Address:……………………………………………………. Make:……………..Model:…………………..
……………………………………………………………… Colour:……………………………………….
……………………………………………………………… Vac Motors:………………………………….
……………………………....PostCode:…………………… Water Pump:…………………………………
Tel No:………………………Fax No:…………………….. Calibration:…………………………………..
ALLTEC™ Evolution 5
SCOPE
DESCRIPTION
The ALLTEC™ Evolution. –
Is by far the most popular carpet cleaning
machine of all the ALLTEC™ range. It is
built to the highest standards of
mechanical and electrical engineering with
up-to-the minute design and value for
money. This appliance is suitable for
commercial AND domestic use.
The twin HD 3 stage vacuum motors produce
the highest airflow rate of any other
machine, which helps, reduce drying times
and speeds cleaning. The water pump,
which is the heavy duty pump with by-
pass, which can be controlled from 0-600 psi
for improved cleaning power. The instrument
panel incorporates easy to read gauges
for, water temperature and vacuum.
CONSTRUCTION
The body is made from a moulded marine
quality fibreglass. Mounted on a sturdy
aluminium base with 10” stair climbing
wheels on the rear and full-swivel twin 3
inch diameter castor wheels on the front.
The rear tray is easily removed for all
mechanical and electrical components.
MAIN ADVANTAGES
Twin 2.5 HP 3-stage Vacuum motor for
high airflow. 0-600psi
controllable water pressure
Air Box – exhaust deflect systems for
improved motor performance * Large
capacity tanks for less frequent filling.
DIMENSIONS
556mm Width x 808mm Length x 900mm
Height (21.89” W x 31.8” L x 35.43” H)
WEIGHT
Total 49kgs (108lbs) ~ 60kgs (132lbs)
CAPACITIES
Solution tank 60 litres (13.19 gallons)
Waste tank 27 litres (5.93 gallons)
EXTERNAL CONNECTIONS
Electrical connections
VACUUM MOTORS
Twin Electro 3-stage, 1.k6w, 2.5hp,
parallel system for greater airflow.
WATER PUMP
600 psi Pump Tec Piston Pump
POWER CABLE
2 x 10 metres 3 wire earthed cable fitted
with 13 amp moulded plug to meet BS
EXTERNAL CONNECTIONS
Solution connections
HOSE ASSEMBLY
Vacuum Hose: 50mm Dia x 3.75 Metres
Crush proof Hose.
Whip hose: 38mm Dia x 3.75 Meters
Crush proof Hose
Solution Hose: 8mm Dia x 7.5 Metres
3000 psi rated rubber Hose
FLOOR WAND
A polished stainless steel easy glide12”
“s” bend with twin jets and adjustable
plastic coated handle.
HAND TOOLS (Optional)
Our range of hand tools consists of
economy clear type to very high quality
aluminium tools.
WARRANTY
Full 12 months warranty on all parts from
recorded data of purchase.
AFTER SALES
We offer an excellent after sales service
with 100% spares availability form stock.
Our SPEEDPART service allows all parts
ordered before 3pm on any weekday to be
despatched the same day and should then
be with you the next morning.
CHEMICALS
We highly recommend the ULTIMATE
MASTER for use in the machine with the
rest of our professional range of
chemicals.
NOISE LEVELS
Sound pressure level = tbc dB(A)
Sound power level = tbc dB(A)
PLEASE NOTE
All specifications are approximate and are
subject to change without prior notice
HEATER
3Kw in tank heater 0-70oC with safety cut out.
2Kw in-line heat & run system with 2 stage power
control.
ALLTEC™ Evolution
6
WARNINGS
Throughout this manual these symbols & notes are used to indicate the
following;
DANGER
Imminent danger that is likely to cause serious injury or
loss of life.
WARNING
Safety situations that may cause serious injury or loss of
life.
CAUTION
Safety situations that may cause problems or damage to the
equipment.
NOTE
To draw attention to procedures which it is essential to
observe for correct operation.
1) Only qualified people to work on and operate this machine.
2) Before servicing or repair familiarise yourself with the relevant instruction
manual.
3) Never use the machine in aw ay it was not designed for.
4) This machine must always be connected to earth.
5) Always Disconnect the Electrical Supply due to the hazard of electricity
during cleaning or maintenance by removing the plugs from the socket-
outlet.
Failure to heed Safety Precautions could lead to severe injury.
We recommend using the following Personal Protective Equipment
•Safety Glasses
• Ear Protection
• Disposable Gloves
ALLTEC™ Evolution 7
CAUTION
This appliance is not suitable for picking up hazardous dust.
CAUTION
This appliance is for dry use only and is not to be used or stored
outdoors in wet conditions.
WARNING
Only use the brushes provided with the appliance or those
specified in the instruction manual. The use of other brushes
may impair safety.
CAUTION
If foam or liquid escapes from the appliance, switch off
immediately.
ALLTEC™ Evolution
8
Do check frequently to make sure your machine is fully earthed; that the mains plug
contains a fuse of the correct rating (amp 13), and that the plug is connected at all
times to a 13 amp fused supply.
Do regularly examine the supply cord for damage, such as cracking or ageing. If
damage is found, replace the cord before further use.
Do only replace the supply cord with the type specified in the instruction manual.
Do keep the machine well ventilated. Do not position close up against a wall or in a
closed hall way
Do remember to add Anti-Foam to the waste tank (if required) when it is emptied.
Do keep the two vacuum filters (in the waste tank) free of fluff and debris, otherwise it
could cut off the airflow prematurely.
Do regularly clean the waste tank water level limiting device in accordance with the
instructions and examine it for signs of damage.
Do lubricate hose connectors regularly with silicone lubricant.
Do remember to switch off the heater before emptying the solution tank
Don’t use a hose connected to a tap to fill the machine solution tank – it’s all too
easy to get distracted and allow the tank to overfill – with potentially disastrous
results!
Don’t make do with one bucket for both filling and emptying the machine. Use one
bucket for the clean water and a separate one for the waste. That way you will avoid
getting dirt and grit in the solution tank and ultimately the water pump. Grit and water
pumps don’t mix.
Don’t use cleaning agents other than those supplied for use with the machine. Use
of other agents could cause damage to the machine – and may also harm the
materials being worked on.
Don’t allow the temperature of the water in the solution tank to exceed 70ºC (50ºC
when using Ultimate Master)
Don’t try to carry your machine up or down stairs if on your own or part full of water
Don’t leave your machine or any solution holding equipment out at night in your van
when it could be exposed to freezing conditions.
Don’t continue to use the machine in the event of a malfunction. Switch off at the
mains, withdraw the plug from the mains outlet and investigate the fault more fully. If
in doubt call our service workshop on 01763 208222 or in the event of an electrical
problem – call a qualified electrician.
Do’s and Don’t’s
Don’t allow the rotating brushes to come into contact with the supply cord ie when
using a Rotovac or other rotary cleaning equipment.
ALLTEC™ Evolution 9
SAFETY DECALS
Nameplate
Read the instructions
Electrical hazard
ALLTEC NETWORK
Butts Farm Business Units, Fowlmere, Royston, Herts. SG8 7SL
Tel: 01763 208222 Fax: 01763 208906
Product: Wet Carpet & Upholstery Cleaner
Serial No.: xxxxxxxxxx
Date Code: 200X / XX / XX
Voltage: 230 V ∼ Pump: 0 ~ xxx psi
Power: 3.0 kw Vacuum: 0 ~ 8 mmHg
Current: 13 A Temp.: 0 ~ 70 °C
Frequency: 50 Hz
REFER TO USER MANUAL BEFORE USE & MAINTENANCE
Tabla de contenidos
