AllSportSystems SkyRailPlus Manual de usuario

[email protected] 877-847-1280 www.allsportsystems.com

SkyRailPlus™

Cage Track Sliding Projector Mount

ASSEMBLY GUIDE



AllSportSystems, Inc.© 2018.

TABLE OF CONTENTS

What’s Included - Parts and Hardware 3

Find SkyRailPlus™ Position for your projector 4

Sample SkyRailPlus™ Mounting positions 6

When to use half step SkyRailPlus™ positions 7

SKYRAILPLUS™ ASSEMBLY 8

STEP 1 - Attach ARMS to side RAILS 8

STEP 2 - Attach TOP to RAILS 9

STEP 3 - Attach EXTENDERS 10

STEP 4 - Attach HOOKS 11

PROJECTOR/MOUNT INSTALLATION 12

Overview Of Universal Mount Hardware 12

Parts Needed From The Universal Projector Mount Kit 13

STEP 1 - Attached Bracket to SkyRailPlus™ 14

STEP 2 - Attach Bracket to Projector 15

STEP 3 - Hang Projector 16

Need Help? 16

Page 2 of 16 Rev August 10, 2018



AllSportSystems, Inc.© 2018.

What’s Included - Parts and Hardware

The following items are included in the SkyRailPlus™:

1 ea. - Top

2 ea. - Rails

2 ea. - Arms

2 ea. - Extenders

2 ea. - Hooks

-------------------------------------------------------------------------

9 Total pieces + connecting hardware.

Page 3 of 16 Rev August 10, 2018



AllSportSystems, Inc.© 2018.

Find SkyRailPlus™ Position for your projector

The SkyRailPlus™ can position a projector a maximum distance of 2’10” outside the

MiniBay™ or Superbay™ enclosure. To confirm the mounting position and proper

enclosure configuration follow the three steps below. If you plan on switching between

4:3 aspect ratios and HD (16:9 or 16:10) aspect ratios, see When to Use Half Step

SkyRailPlus™ Positions.

(1) Find your projectors throw distance using the chart below.  If you have a custom

sized hitting bay or your projector is not listed contact All Sport Systems for assistance.

EXAMPLE: 5’10” (highlighted in yellow) is the distance the ULTRASHORT-4.3 projector

will mount from the screen for the MiniBay when projecting an image in the 4:3 aspect

ratio. Enter your throw distance on the line provided on the following page (paragraph 3).

PROJECTORS

ASPECT

RATIO

MiniBay™

SuperBay™

ULTRASHORT-HD-1080P

(Optoma GT1080 Darbee)

4:3

6'2"

7'6"

8'10"

10'2"

16:9

4'8"

5'8"

6'8"

7'8"

ULTRASHORT-4.3

(Optoma X305ST)

4:3

5'10"

7'1"

8'4"

9'7"

16:9

5'10"

7'1"

8'4"

9'7"

ULTRASHORT-HD-720P-OC

(Viewsonic PJD6552LWS)

4:3

5'5"

6'8"

7'10"

8'12"

16:10

4'6"

5'6"

6'6"

7'6"

ULTRASHORT-HD-ZOOM

(BENQ HT12150ST)

4:3

9'4"

11'5"

13'5"

15'5"

16:9

7'0"

8'7"

10'1"

11'7"

(2) Confirm your throw distance is in range for the depth of your hitting enclosure. If your

projectors throw is greater than the ranges shown below for your enclosure depth, it will be

necessary to adjust the projector selection and/or increase the depth of your the enclosure.

EXAMPLE: The 5’10” throw



in our above example means the enclosure must be 5’ or 6’

feet deep



. Whereas the a 7’8” throw



(ULTRASHORT-HD-1080P projector, 16:9, 16’ Wide

Superbay) requires a 6’ to 8’ deep enclosure



Enclosure Depth

Throw Distance Range

5 Feet

4’0” to 6’10”

6 Feet

5’ to 7’10”

7 Feet

6’ to 8’10”

8 Feet

7’ to 9’10”

9 Feet

8’ to 10’10”

10 feet

9’ to 11’11”

Page 4 of 16 Rev August 10, 2018



AllSportSystems, Inc.© 2018.

(3) Find the distance your projector will need to be placed outside your enclosure. To

determine this distance, first determine the distance from the screen to the front of your

enclosure. The screen for the MiniBay/SuperBay is hung approximately 12” from the back

of the enclosure. Thus the screen hangs 4’ from the front of a 5’ deep enclosure or 5’ from

a 6’ deep enclosure, etc. Subtract this distance from the projectors throw distance.

EXAMPLE: Using the throw distance of 5’10” for a 5 deep MiniBay, the projector will be

1’10” outside the enclosure. (i.e. 5’10’ - 4’ = 1’10”)

Enter projector throw distance:

_______ a

See Par. 1 above

Enter enclosure depth minus 12”:

_______ b

For 5’0” deep enclosure enter 4’0”

For 8’0” deep enter 7’0”, etc.

Subtract line b from a:

________

This is the distance from front of enclosure to projector. Use this

figure to find your SkyRailPlus™ Position (see Par. 4 below)

(4) Use the result from Par. 3 above to find your SkyRailPlus™ position. You will need this

information for Step 3 - Attach top to side rails. EXAMPLE: 1’10” falls between 10” and

2’0”, therefore the Default position.

Distance from front of

enclosure to projector

lens.

SkyRailPlus™ Position

0” to 10”

Use Short Reach

10” to 2’0”

Use Default

2’0” to 2’10”

Use Long Reach

Page 5 of 16 Rev August 10, 2018



AllSportSystems, Inc.© 2018.

Sample SkyRailPlus™ Mounting positions

See MiniBay/SuperBay Installation Instructions for information about installing your

SkyRailPlus™ on your MiniBay or SuperBay.

Installed in Short Position with Range

of 0” to 14” outside enclosure

Installed in Default Position with

Range of 7” to 24” outside enclosure

Installed in Long Position with Range

of 17” to 34” outside enclosure

Page 6 of 16 Rev August 10, 2018



AllSportSystems, Inc.© 2018.

When to use half step SkyRailPlus™ positions

Some customers want the ability to set the projector to a 4:3 aspect ratio when playing

golf and an HD (16:9 or 16:10) aspect ratio when watching a movie. When switching

between these aspect ratios a projector must be moved further back in 4:3. As noted

previously in this guide there are three primary SkyRailPlus™ positions (1) Short

Reach, (2) Default and (3) Long Reach. However, it is also possible to position halfway

to the Short Reach and Long Reach positions.

Shot Reach - Half Step

Long Reach - Half Step

The following chart is a complete listing of the ranges available for each top position:

SkyRailPlus™ Positions

From

Short Reach

0”

14”

Half Step

2”

19”

Default

7”

24”

Half Step

12”

29”

Long Reach

17”

34”

This information can prove helpful when locating the best slide range based on a

particular projectors throw ratio. For example below is chart showing the distance the

ULTRASHORT-HD-720P-OC projector will need to be placed outside the enclosure for

aspect ratios and enclosure depth shown:

Ultrashort-HD-720P Projector

16:10 Aspect

4:3 Aspect

SkyRaiPlus™ Position

MiniBay™ 10 wide 5 deep

6”

17”

Short Reach Half Step

SuperBay™ 12 wide 5 deep

18”

32”

Long Reach

SuperBay™ 14 wide 6 deep

18”

25”

Long Reach Half Step

The best position for the 10’ wide 5’ deep MiniBay™ is the Short Reach Half Step of 2”

to 19” that accommodates both aspect ratios. Whereas the best position for the 14’

Wide 6 deep SuperBay™ is the Long Reach Half step. The 14 wide SuperBay™

requires a 6’ deep enclosure to accommodate the longer projector throw. If you have

questions or need assistance don’t hesitate to contact All Sport Systems.

Page 7 of 16 Rev August 10, 2018



AllSportSystems, Inc.© 2018.

SKYRAILPLUS™ ASSEMBLY

STEP 1 - Attach ARMS to side RAILS

You will need 4 ea bolts and 4 ea nuts to connect the ARMS to the RAILS. Align the

ARMS with the first two holes on the RAILS as shown.

Page 8 of 16 Rev August 10, 2018



AllSportSystems, Inc.© 2018.

STEP 2 - Attach TOP to RAILS

Review Find SkyRailPlus™ Position for your projector. Thereafter attach the TOP to

the RAILS in one of the positions noted below. You will need 4 ea bolts for the Short

Reach and Long Reach positions or 6 ea bolts for the Default position.

SHORT REACH

0” to 10”

Use 4 ea bolts. Align the last

and middle holes of the top with

the first and middle holds on the

rails. As shown this will position

the top closer to the hitting

enclosure for situations where

the projector much be very close

to the hitting bay.

DEFAULT

10” to 2’0”

Use 6 ea bolts. Align the end

and middle holes on the top with

the three holes on the rails. As

shown this is the default, or

most common configuration for

most customers.

LONG REACH

2’0” to 2’10”

Use 4 ea bolts. Align the first

and middle holes of the top with

the last and middle holds on the

rails. As shown this will position

the top further from the hitting

enclosure for situations where

the projector must be further

away from the hitting bay.

Page 9 of 16 Rev August 10, 2018



STEP 3 - Attach EXTENDERS

You will need 2 ea bolts, 2 ea washers, 2 ea tooth washers, and 2 ea nuts to attach

EXTENDERS to the ARMS.

Attach EXTENDERS to the

outside of the ARMS

already attached to the

SkyRailPlus™.

NOTE: The slotted hole

on the EXTENDERS

should be positioned to the

TOP, opposite to the

slotted hole on the ARMS

Place toothed washers

between the ARMS and

EXTENDERS as shown.

This will help to grip the

plastic to keep the skyrail

in position.

The EXTENDERS can be

position at various angles

relative to the

SkyRailPlus™, allowing

the skyrail to be lifted up at

an angle from the

enclosure.

Page 10 of 16 Rev August 10, 2018

Tabla de contenidos

Otros manuales de Rack y soporte de AllSportSystems

AllSportSystems

AllSportSystems SkyRail Plus Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario