Allied Vision Bonito PRO Series Manual de usuario

EN QuickStart Guide

DA Hurtig startguide

DE Schnellstartanleitung

ES Guía rápido

FI Pikaopas

FR Guide de démarrage rapide

IT Guida Rapida

NL Snelstartgids

NO Hurtigstartveiledning

SV Snabbstartsguide

ZH 快速入门指南

JA クイックスタートガイド

Bonito PRO

V1.0.1

2019-Sep-12

Validity

This quickstart guide is valid for all Bonito PRO models.

Shipping contents

•BonitoPROcamera

• QuickStart Guide download instructions

What else do you need?

English

Document/Information Document

Bonito PRO Technical Manual

Bonito PRO Features Reference

Go to https://www.alliedvision.com, then select

Support > Technical documentation. In the drop-

down menu, choose Bonito PRO Documentation.

Hardware Selection for Bonito

PRO Cameras application note

Go to https://www.alliedvision.com, 

then select Support > Technical papers,

knowledge base. Open the CoaXPress accordion.

Recommended frame grabbers

For a complete list of supported frame grabbers, cables, and accessories, see

the Hardware Selection for Bonito PRO Cameras application note.

Contacting Allied Vision

Website

To directly contact Allied Vision with any support inquiry, go to: 

https://www.alliedvision.com, then select About Us > Contact us > Technical

Support & Repair / RMA.

Software Reference

Euresys Coaxlink Quad G3

PCIe 3.0 four-connection CoaXPress frame grabber, four

CoaXPress CXP-6 connections, 2,500 MBps camera

bandwidth, PCIe 3.0 (Gen 3) x 4 bus, 3300 MBps bus

bandwidth, PoCXP, Windows drivers

Active Silicon FireBird Quad

CXP-6

Quad input CoaXPress frame grabber, four CoaXPress

connections each at 6.25 Gbps, Windows support (32-

bit and 64-bit), PoCXP

To find an Allied Vision office or distribution partner, go to:

https://www.alliedvision.com, then select About Us > Where we are.

Telephone and email

For camera-related inquiries contact us at support@alliedvision.com

North and South America (toll-free): // +1-877-USA-1394

Europe, Middle East, and Africa: // +49 36428 677-0

Asia-Pacific: // +65 6634 9027

China: // +86 (21) 64861133

Headquarters

Allied Vision Technologies GmbH

Taschenweg 2a

07646 Stadtroda, Germany

CEO/Geschäftsführer: Andreas Gerk, Peter Tix

Registration Office: AG Jena HRB 208962

Compliance, safety, and intended use

For customers in Europe

Allied Vision has demonstrated the fulfillment of the requirements

relating to the Bonito PRO camera family.

• Directive 2014/30/EU (Electromagnetic compatibility)

• Directive 2011/65/EU, incl. amendment 2015/863/EU (RoHS)

Directive 2012/19/EU

(Waste Electrical and Electronic Equipment, WEEE)

For customers in the USA

Class B digital device

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

For customers in Canada

This apparatus complies with the Class B limits for radio noise emissions set out

in the Radio Interference Regulations.

CAN ICES-3 (B) / NMB-3 (B)

Avoid electromagnetic interferences

For all power and interface connections, use shielded cables only. 

Please use cables recommended by Allied Vision.

Camera applications and intended use

General use

• The user is responsible for operating the camera within the specifications

defined in the technical manual, and within appropriate environmental

We caution the user that changes, or modifications not expressly

approved by the party responsible for compliance could void the

user's authority to operate the equipment.

conditions and technical prerequisites, to ensure trouble-free camera

operation.

• The camera is compliant with current data communication standards;

however, those standards do not allow for self-monitoring. Thus, the camera

cannot be used as a standalone device for security-related monitoring

operations.

• The camera is a hardware product. Only when used with appropriate

accompanying software, the camera will produce the desired results. The

realization of intelligent solutions requires additional software that is

suitable to run with the camera.

• The camera is a component, it is neither a finished product, nor is it a ready-

made technical solution.

• The camera-supporting software can be obtained and installed separately

from the camera. Usage of the software is solely the responsibility of the

user.

• The camera must not be opened. For all repair tasks, contact Allied Vision or

one of Allied Vision's authorized representatives.

• Observe the intended use. The camera must only be used for purposes that

are in conformity with the stated intended use.

• Additionally, refer to the warranty information on the Allied Vision website.

Use in medical devices

The camera provides basic adequacy to be used in medical devices as well.

However, it is not specially designated for operation in medical devices. When

used as part of a medical device, a review of the specific application is necessary

in cooperation with Allied Vision. Users who integrate the camera into an

application must comply with the rules and regulations concerning medical

devices.

Environmental conditions

The following values present environmental conditions that are safe for all

Bonito PRO cameras.

Condition Value

Operation (housing temperature) -20 °C to +70 °C (without condensation)

Storage (ambient temperature) -20 °C to +70 °C (without condensation)

Relative humidity, non-condensing 20 to 80% non-condensing

Overview of installation

Complete the steps listed below to successfully install your Bonito PRO camera.

Step 1: Install and configure the frame grabber.

Step 2: Connect the camera and ensure the camera is powered.

Step 3: Acquire your first image with the frame grabber software.

Installing and configuring the frame grabber

The procedure to obtain first image from your Bonito PRO camera is dependent

on the frame grabber GenICam browser or SDK.

The maximum cable length between the Bonito PRO camera and the host PC is

dependent on the bit rate and the type of coaxial cable used. For more

information refer to your frame grabber documentation.

Install the frame grabber in your host PC and configure the frame grabber

software including drivers, utilities, and libraries. Ensure the system BIOS

version is compatible with the frame grabber. For additional information, see

the technical documentation provided by the frame grabber manufacturer.

Tabla de contenidos

Idiomas:

Otros manuales de Cámara digital de Allied Vision

Allied Vision

Allied Vision Alvium Series Manual de usuario

Allied Vision

Allied Vision MANTA Manual de usuario

Allied Vision

Allied Vision Mako U-130 Manual de usuario

Allied Vision

Allied Vision Alvium Series Manual de usuario

Allied Vision

Allied Vision Alvium G1 Manual de usuario

Allied Vision

Allied Vision Pike F-032B/C Manual de usuario

Allied Vision

Allied Vision Alvium G1 Manual de usuario

Allied Vision

Allied Vision Prosilica GT Series Manual de usuario

Allied Vision

Allied Vision Goldeye GigE Manual de usuario

Allied Vision

Allied Vision Alvium Series Manual de lista de piezas

Allied Vision

Allied Vision AVT GigE Bigeye Manual de usuario

Allied Vision

Allied Vision Alvium 1800 Series Manual de usuario

Allied Vision

Allied Vision Alvium 1800 U-050m Manual de usuario

Allied Vision

Allied Vision Prosilica GB Series Manual de usuario

Allied Vision

Allied Vision Alvium Series Manual de usuario

Allied Vision

Allied Vision AVT Stingray Manual

Allied Vision

Allied Vision USB3 Manual de usuario

Allied Vision

Allied Vision Mako U USB3 Vision Manual de usuario

Allied Vision

Allied Vision Goldeye G Manual de usuario

Allied Vision

Allied Vision Pike F-032B Manual de usuario

Allied Vision

Allied Vision Prosilica GC660 Manual de usuario

Allied Vision

Allied Vision Prosilica GT Series Manual de usuario

Allied Vision

Allied Vision Prosilica GC Series Manual de usuario

Allied Vision

Allied Vision Alvium G5 Heat Sink Kit Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario