Allied Telesis AT-PC232/POE Manual de usuario
Datasheet | Switches
AT-PC232/POE
2 port Fast Ethernet Power over Ethernet
switch, 10/100TX to 100FX (SC), 2km
Powering Remote Devices
The PC232 series switches are the ideal
solution for powering remote devices such as IP
phones, video cameras, wireless access points,
etc, which are more than 100m from a Power
over Ethernet switch. The AT-PC232/POE
features a 100FX fiber-port and a 10/100TX
twisted-pair port. The fiber-optic port features
an SC connector capable of operating at a
distance of up to 2 kilometers (6,561 feet) over
multi-mode fiber. The twisted-pair port has an
RJ-45 connector with a maximum operating
distance of 100 meters (328 feet). In addition to
transmitting data, the twisted-pair port also
injects power down the cable, allowing a remote
Power over Ethernet Powered Device to
operate without the need of any additional
power source. All Power over Ethernet Powered
Devices (IEEE 802.3af compliant) are supported,
as the AT-PC232/POE can deliver a full 15.4W
of power to the remote device.
VLAN Support
Many backbone switch products support the
industry standard IEEE 802.1Q specification for
irtual LANs ( LANs) that send extra-long
data packets on the network. The PC232 series
switches are fully compatible with these long
packets, enabling them to be used in modern
networks. Switches not supporting this feature
will discard these extra long packets, making
them unsuitable for modern networks.
Small and Flexible
The small size and internal power supply of the
PC232 series allows them to be used almost
anywhere. The units can be desktop mounted or
wall-mounted.
MissingLin TM and Smart
MissingLin TM (SML)
The MissingLink feature allows the ports on the
media converter to pass the Link status of their
connections to each other. When the media
converter detects a problem with a port - such
as the loss of connection to a node - it
shuts down the connection to the other port,
thereby notifying the node that the connection
has been lost. The Smart MissingLink (SML)
feature monitors network connections and
provides notification when network segments
fail, allowing network managers to quickly
identify the source and location of failed
segments and minimize downtime.
Key Features
•Convert speed as well as media type
•IEEE 802.3af Power over Ethernet compliant
•Supplies up to 15.4W of PoE power
•Auto MDI/MDI-X
•MissingLink (ML)
•Smart MissingLink (SML)
•Supports 1532 bytes frame
•Support for multi-mode fiber
•Supports half and full-duplex operation
•1k MAC address tables
•Store-and-forward switching mode
•Transparent to IEEE 802.1Q packets
•Standalone or wall-mountable
•Internal AC power supply
•AC power cord retaining clip
AT-PC232/POE
2 Port Fast Ethernet Speed/Media Converting Switch with Power over Ethernet
Allied Telesis www.alliedtelesis.com
Status Indicators
System LEDs:
Power Indicates power is applied to the
converter
Mode status Indicates operating mode,
MissingLink, Smart MissingLink and
Link Test
Per Fiber Port:
Link (L K) Indicates valid/invalid link
Activity (ACT) Indicated data is being received or
transmitted
Per Copper Port:
Link (L K) Indicates valid/invalid link
Activity (ACT) Indicated data is being received or
transmitted
Speed (100) Indicates whether the port is
connected at 100Mbps or 10Mbps
Auto-negotiation Indicates port is set for auto-
(Auto EG) negotiation
PoE Power (15W) Indicates that the remote device is a
Class 0 or Class 3 PD device
PoE Power (7W) Indicates that the remote device is a
Class 2 PD device
PoE Power (4W) Indicates that the remote device is a
Class 1 PD device
Operational Characterisitcs
(Each port can be configured via the following switches)
Per Fiber Port:
Duplex Selects either full or half-duplex
operation
Per Copper Port:
Auto Selects auto-negotiation mode or
manual setting
Duplex Forces port to full or half-duplex
operation
(auto setting = manual only)
100 Forces port to 10 or 100Mbps
operation
(auto setting = manual only)
MAC address table 1k addresses
Forwarding/ 148,880pps for 100Mbps
filtering rate 14,880pps for 10Mbps
Latency 14.3Ìsec
(64 byte packet, 100Mbps full-duplex)
Maximum packet 1916 bytes
size
Optical Characterisitcs
Wavelength 1310nm
Fiber cable 50/125um or 62.5/125um
multi-mode fiber
Power Characteristics
Input voltage (auto-ranging)
Internal power supply 100-120V AC/60Hz,
220-240V AC/50Hz
Power consumption 25W max
Power over Ethernet
Opertating mode IEEE 802.3af Mode A
Maximum power 15.4W
Environmental Specifications
Operating temp. 0°C to 40°C
Storage temp. -25°C to 70°C
Relative humidity 5% to 95% non-condensing
Operating altitude 0 to 10,000 feet
Physical Characteristics
Dimensions 15.5cm x 13.1cm x 4cm
(W x D x H) (6.1" x 5.16" x 1.58")
Weight 0.748kg
(1.65lb)
Electrical/Mechanical Approvals
FCC Class B, E 55022 Class B, C-Tick, CE compliant
Ordering Information
AT-PC232/POE-xx
2 port Fast Ethernet PoE switch, 10/100TX to 100FX (SC), 2km
Where xx = 10 AC power supply, US power cord
20 for no power cord
30 AC power supply, UK power cord
40 AC power supply, Australian power cord
50 AC power supply, European power cord
AT-PC232/POE | 2 Port Fast Ethernet Speed/Media Converting Switch with PoE
USA Headquarters |19800 North Creek Parkway |Suite 100 |Bothell |A 98011 |USA |T: +1 800 424 4284 |F: +1 425 481 3895
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: +65 6383 3832 |F: +65 6383 3830
www.alliedtelesis.com
© 2010 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000284 Rev.C
Output Power (dBm)
Min. Typical Max.
-22.5 -20.3 -14
Receive Power (dBm)
Min. Typical Max.
-31.8 -34.5 -14
Otros manuales para AT-PC232/POE
1
Otros manuales de Cambiar de Allied Telesis
Allied Telesis
Allied Telesis AT-8000S/48POE Manual de usuario
Allied Telesis
Allied Telesis CentreCOM FS980M Series Manual de usuario
Allied Telesis
Allied Telesis AT-FS980M/28DP Manual de usuario
Allied Telesis
Allied Telesis AT 8088/SC AT-8088/SC AT-8088/SC Manual de usuario
Allied Telesis
Allied Telesis AT-9900s Series Manual de instalación y funcionamiento
Allied Telesis
Allied Telesis AT-9812T V2 Manual de usuario
Allied Telesis
Allied Telesis x950 Series Manual de usuario
Allied Telesis
Allied Telesis AT-GS950/24 Manual de usuario
Allied Telesis
Allied Telesis AT-SB*908 GEN2 Manual de usuario
Allied Telesis
Allied Telesis AT-9924SP Manual de usuario
Allied Telesis
Allied Telesis AT-9028 Manual de usuario
Allied Telesis
Allied Telesis CentreCOM GS970M Series Manual de usuario
Allied Telesis
Allied Telesis AT-9006SX/SC Manual de usuario
Allied Telesis
Allied Telesis Rapier G6 Manual de usuario
Allied Telesis
Allied Telesis WebSmart AT-FS750/48 Manual de usuario
Allied Telesis
Allied Telesis AT-FS705L Manual de usuario
Allied Telesis
Allied Telesis AT-8624T/2M, AT-8624PoE Manual de instalación y funcionamiento
Allied Telesis
Allied Telesis AT-GS900/16 Manual de usuario
Allied Telesis
Allied Telesis IS230-10GP Manual de usuario
Allied Telesis
Allied Telesis AT-8948 Manual
