Allied Data Technologies CopperJet 800 Manual de usuario
Installation manual 800 USB
Manual 800 USB
Rev1.0
2
Contents
General Information
3
Packaging contents
4
How to install the ADSL USB modem
5
ADSL USB modem driver installation under Windows
98 SE
6
ADSL USB modem driver installation under Windows ME
9
ADSL USB modem driver installation under Windows 2000
11
ADSL USB modem driver installation under Windows XP
15
ADSL USB Modem Configuration Wizar
d
16
Configuring the ADSL USB modem by option 1
17
Configuring the ADSL USB modem by option 2
21
Configuring the ADSL USB modem by option 3
24
Troubleshooting
30
Declaration of Conformity
33
Manual 800 USB
Rev1.0
3
General Information
Minimum System Requirements
Windows 98, 98SE, ME, 2000, or XP
Pentium 2 466 MHz
32 MB RAM
USB 1.1 compatible interface
Power consumption
USB 1.1 specification
Certification/Homologation
CE, EN60950, FCC, UL 1950
ADSL Complaince
ANSI T1.413 i2
G.992.1 annex A
G.992.2 (G.Lite)
Multimode
General Specifications
USB Buspowered
DHCP Client
PPP ov
er ATM (RFC 2364)
PPPoE relay
Transparent Bridging (RFC 1483)
Manual 800 USB
Rev1.0
4
Packaging contents
1. ADSL USB modem
2. RJ11 cable
3. USB cable
4. Driver CD
Manual 800 USB
Rev1.0
5
How to install the ADSL USB modem.
1. Connect the USB cable to your computer.
2. Connect the other side of the USB cable to your ADSL USB modem.
3. Connect the RJ11 cable to your ADSL USB modem (the ADSL port on the
back of the ADSL USB modem).
4. Connect the other side of the RJ11 cable into the phone outlet.
See pictur
e below for the setup.
Service Provider
Network (Telco)
RJ11 Cable
USB Cable
Computer
Manual 800 USB
Rev1.0
6
ADSL USB modem driver installation under Windows 98 SE.
1. Place the CD
-
ROM in the CD
-
ROM drive.
After you plugged in the USB cable in the ADSL USB modem and your computer,
Windows automatical
ly detects new hardware.
2. Click on ”
Next
”.
3. Select ”
Search for the best driver for your device (Recommended)
”.
Click on ”
Next
”.
Manual 800 USB
Rev1.0
7
4. Specify the location of the driver or click on ”
Browse
”.
Click on ”
Next
”.
5. Click on ”
Next
”.
Manual 800 USB
Rev1.0
8
6. Click on ”
Finish
”.
After the USB driver installation, the ”
ADSL USB Modem Configuration Wizard
”
will start automatically.
How to configure the ADSL USB modem see chapter ”
ADSL USB Modem
Configuration Wizard
”.
Manual 800 USB
Rev1.0
9
ADSL USB modem driver installation under Windows ME
.
1. Place the CD
-
ROM in the CD
-
ROM drive.
After you plugged in the USB cable in the ADSL USB modem and your computer,
Windows automatically detects new hardware.
2. Se
lect ”
Specify the location of the driver (Advanced)
”.
Click on “
Next
”.
3. Specify the location of the driver or click on
”Browse”
.
Click on
”Next”
.
Manual 800 USB
Rev1.0
10
4. Click on
”Next”
.
5. Click on ”
Finish
”.
After the USB driver installation,
the ”
ADSL USB Modem Configuration Wizard
”
will start automatically.
How to configure the ADSL USB modem see chapter ”
ADSL USB Modem
Configuration Wizard
”.
Tabla de contenidos
Otros manuales de Módem de Allied Data Technologies
Allied Data Technologies
Allied Data Technologies Tornado FMV 56.0 Manual de usuario
Allied Data Technologies
Allied Data Technologies CopperJet 810 Manual de usuario
Allied Data Technologies
Allied Data Technologies Tornado WebJet 128 Manual de usuario
Allied Data Technologies
Allied Data Technologies Tornado SFM 56.0-USB Manual de usuario
Manuales populares de Módem de otras marcas
US Robotics
US Robotics 3453C Manual de usuario
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario
Zte
Zte MF823 Manual de usuario
Four-Faith
Four-Faith F1403 Manual de usuario
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manual de usuario
Gemtek
Gemtek WiMAX WIXFBR-103 Manual de usuario