Allen-Bradley AT16 Manual de usuario
PARTS & DECALS
MANUAL
Manual Part #: 056841P | Revision: E
Language: English | Original Instructions
TRACK BUGGIES
AT16
For information regarding the following, please see “AT16 - Safety & Operator Manual”
• Warranty Information
• Dealer Information
• How to identify the Model / Serial Numbers on the machine
• Engine Detail
056841P Page 3
SECTION 1
PARTS
AT-16 Track Buggy
OPERATIONS - PARTS MANUAL
This manual covers the products listed below:
Part No. Description
074920 BUGGY, TRACK, AT-16, ELECTRIC START
GENERAL
INFORMATION
Table of Contents
Table of Contents.................................................................................................... 4
Factor Service Information ...................................................................................... 5
Replacement Parts Procedures ............................................................................... 6
1 PARTS .................................................................................................................... 7
Track Tensioner and Wheel Assembly..................................................................... 8
Track Roller Assembly & Parts List.......................................................................... 10
Track Bogey Assembly & Parts List......................................................................... 11
Right Track Assembly ............................................................................................. 14
Lever Assembly....................................................................................................... 16
Hydraulic Tank Assembly & Parts List ..................................................................... 20
Hydraulic System, Illustration .................................................................................. 21
Electrical Schematic................................................................................................ 26
Cabinet Assembly ................................................................................................... 28
Engine Mount Assembly.......................................................................................... 30
Stand Assembly ...................................................................................................... 32
Track Assembly ...................................................................................................... 34
Fuel System Assembly ............................................................................................ 36
Control Panel Assembly........................................................................................... 38
Bucket Assembly .................................................................................................... 40
Skid Plate Assembly & Parts List............................................................................. 42
Handle Bar Assembly & Parts List ........................................................................... 43
2 DECALS .................................................................................................................. 45
Decal Layout (Right Side) & Parts List ..................................................................... 46
Decal Layout (Left Side) & Parts List ....................................................................... 47
Manual Revision...................................................................................................... 48
Sect No. Title Page
GENERAL
INFORMATION
This section contains the illustrated drawings and parts list for help in identifying and/or ordering replacement parts for your
machine. Follow the instructions in the front section of this manual “Ordering Parts” when ordering replacement parts to
insure prompt and accurate delivery.
The FRONT and/or REAR orientations are dened from the operator’s view of sitting on machine (SOM).
All set screws have blue (LOC-TITE™) applied at the
factory. If set screw is removed or loosened for any
reason re-apply blue (LOC-TITE™).
All grease ttings are capped with CAP PLUG GC-5
(AEC PN 015692) to protect the tting. If cap becomes
missing or damaged replace it as soon as possible.
Anti-Seize is applied at the factory to drive line couplings,
and moving components. If these parts are disassembled re-apply a light
coat of a graphite based anti-seize.
Factor Service Information
GENERAL
INFORMATION
We recommend AEC quality replacement parts, available from the AEC Customer Service Department or your nearest AEC
Dealer.
Part numbers are subject to change without notice. Part numbers might be different outside of the United States of America.
Use part numbers listed in the applicable parts list table when you place your order. If a part number changes, the AEC
Customer Service Department or your nearest AEC dealer will have the latest part number for the replacement part.
Remember when you order replacement parts, you will need your model number and serial number. These are the num-
bers that you have recorded in the UNIT ID section of this manual. Please order replacement parts by the appropriate part
number, not the key number.
This manual contains an illustrated parts list for help in ordering replacement parts for your machine. Follow the instructions
below when ordering parts to insure prompt and accurate delivery:
1. All orders for service parts - include the serial number for the machine. Shipment
will be delayed if this information is not available.
2. Include correct description and part number from the “PARTS” Section 4.
3. Specify exact shipping instructions, including the preferred routing and complete destination
address.
4. DO NOT return parts to AEC without receiving written authorization from AEC. All authorized
returns must be shipped pre-paid.
5. When placing an order, please contact the AEC Dealer nearest you.
All information, specications, and illustrations in this manual
are subject to change without notice and are based
on the latest information at the time of publication.
Replacement Parts Procedures
SECTION 1: PARTS
056841PPage 8
SECTION 1
PARTS
17
8
5
634
2
12
10
13
9
14
15
16
11
Track Tensioner and Wheel Assembly
056841P Page 9
SECTION 1
PARTS
ITEM PART NO. DESCRIPTION QTY
1 011238 FASTENER, NUT HEX NYLOK 1/2-13 2
2 011490 FASTENER, FW HARDENED 1/2 2
3 056719 BEARING, 6204-2RS C/3 2
4 056720 SEAL, I.S.P. 20 X 47 X 7 A-NBR SEAL 2
5 056728 IDLER WHEEL WELDMENT 1
6 056729 AXLE F/ IDLER 1
7 056736 SHIELD 2
8 056760 RETAINING RING, INT, 1 13/16 2
- 056762 ASSEMBLY, IDLER (INCLUDES ITEM # 1-8) 1
9 010112 FASTENER, NUT HEX 3/4-10 2
11 056662 IDLER ADJ SCR WELDMENT 1
12 056733 IDLER ARM WELDMENT 1
13 056762 IDLER WHEEL ASSEMBLY 1
14 064848 SPRING RETAINER, FRONT 1
15 064850P IDLER SPRING 1
16 056926 SPRING RETAINER, BACK 1
Track Tensioner and Wheel Assembly,
Parts List
056841PPage 10
SECTION 1
PARTS
ITEM PART NO. DESCRIPTION QTY
- 056761 ROLLER ASSEMBLY -
1 011238 FASTENER, NUT HEX NYLOK 1/2-13 2
2 011490 FASTENER, FLAT WASHER, HARDENED 1/2” 2
3 056710 AXLE F/ ROLLER 1
4 056718 ROLLER 1
5 056719 BEARING, 6204-2RS C/3 2
6 056720 SEAL, I.S.P. 20 X 47 X 7 A-NBR 2
7 056736 SHIELD 2
8 056760 RETAINING RING, INT, 1 13/16 2
12
7
6
8
5
4
3
Track Roller Assembly & Parts List
Tabla de contenidos
