4’ Slings 2Lifting Can Asssembly Eyeless Round Sling Wear Resistant, 4200lb Choker Capacity.
Good quality for lift safety.
McMaster* 8527T32
6’ Slings 2Lifting Frame Assembly Eyeless Round Sling Wear Resistant, 4200lb Choker Capacity.
Good quality for lift safety.
McMaster* 8527T32
Nylon Strap 1Hanging/Strapping Cylinder 1” nylon cinching strap, any 1” ratchet strap will work. McMaster* 8842T281
Spacer Block 1Populating Array 9” spacer to go between mast and frame. McMaster* N/A
Chainfall 1Flipping Array 1/2 ton 20’ capacity, good quality 1/2 ton or it will not last. McMaster* 3094T1
⅝” Shackle 2Lifting Can & Frame Assemblies Standard shackle made for lifting. Good quality for lift safety. McMaster* 3663T43
⅝” Swivel Hook with Safety Latch 1Lifting Can & Frame Assemblies Necessary to help with alignment when installing both can and
frame. Good quality for lifting safety.
McMaster* 3525T45
2” Ratchet Strap 1Flipping Array Used to attach frame to mast / holds spacer block in place McMaster* 29665T33
Sling Protectors 4Lifting Can & Frame Assemblies Protects slings when lifting / Nylon 6” wide McMaster* 3339T3
LIFTING & HANDLING
3/8 Battery Impact 4Assembling Frame & installing modules Makita, Dewalt, Milwaukee all have proven to work ne. McMaster N/A
⅝ sq. Hex Shank Adapter ¼ Hex 5Assembling Frame & installing modules Used for impact wrenches. McMaster 5553A41
9/16”, ⅜” Drive Impact Socket 4Assembling Frame & installing modules Be sure to use impact rated sockets. McMaster 5553A16
¼” Drive Flex Head Handle 4Assembling Frame Makes assembling frame much easier and reduces pinch points
caused by using a wrench.
McMaster 5521A13
9/16”, ¼” Drive Deep Well Socket 4Assembling Frame Makes assembling frame much easier and reduces pinch points
caused by using a wrench.
McMaster 5543A79
Pointed End Bar 4Assembling Frame Used to align 3/8” holes, narrow tip is important. McMaster 5987A4
2lb Dead Blow Hammer 4Assembling Frame Used to install frame coupling brackets when they are
misaligned, a regular hammer with a block of wood will also work.
McMaster 6085A13
9/16” Combination Wrench 1Assembling Frame Used to install cylinder mount bracket where ex head and
deepwell socket can’t reach.
McMaster 5772A37
⅜” Impact Swivel Joint Adapter 2Installing modules Used to install module clamps that land near the frame axle that
can not be accessed with straight socket.
McMaster 5553A73
3” Long ⅜ Impact Extension 4Assembling Frame & installing modules Be sure to use impact rated extensions. McMaster 5553A71
Torque Wrench 1Minimast bolts Minimum of 260 ft-lb range. Good quality is important to
maintain functional life of tool
McMaster 85555A321
1 - 1/16” Socket 1Minimast bolts Match up with torque wrench drive size and be rated to required
torque.
McMaster 5547A58
1 ⅝” Socket on Breaker Bar 1Base bolts Minimum 3/4 drive with 4’ handle to achieve required bolt
tension. Wrench will also work with breaker bar.
McMaster 54555A55
1 ⅝” Wrench 1Base bolts Wrench used to hold nut when installing steel riser or helical pile,
does not require much resistance.
McMaster 7242A37
(Quantity needed for crew of 4)
RECOMMENDED TOOLS LIST
ITEM QTY LOCATION/STEP USED DESCRIPTION & RECOMMENDATIONS
FRAME ASSEMBLY
VENDOR PART #
V2
