ALFAtron ALF-TP405PT Manual de usuario
Alfatron ALF-TP405PT
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual is for reference only, different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage.
Trademarks
Mentioned product model and logo are trademarks. Any other trademarks mentioned in
this manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
Alfatron ALF-TP405PT
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Alfatron ALF-TP405PT
Contents
1. Introduction ................................................................................................................. 1
1.1 Introduction to TPHD405PT-WPB ..................................................................... 1
1.2 Features ............................................................................................................ 1
1.3 Package List ...................................................................................................... 1
2. Panel Description ........................................................................................................ 2
2.1 Front Panel ........................................................................................................ 2
2.2 Side Panel ......................................................................................................... 3
2.3 Rear Panel ......................................................................................................... 4
3. System Connection ..................................................................................................... 5
3.1 Usage Precautions ............................................................................................ 5
3.2 System Diagram ................................................................................................ 5
3.3 Connection Procedure ....................................................................................... 5
3.4 Energizing Programmable Control Panel........................................................... 6
3.5 PoC Solution ...................................................................................................... 6
3.6 Application ......................................................................................................... 7
4. Operations .................................................................................................................. 8
4.1 Operations of front panel buttons ...................................................................... 8
4.2 RS232 Control ................................................................................................... 8
4.2.1 Installation/uninstallation of RS232 Control Software .............................. 8
4.2.2 Basic Settings .......................................................................................... 8
4.2.3 RS232 Communication Commands ........................................................ 9
5. Specification ............................................................................................................. 14
6. Panel Drawing .......................................................................................................... 15
7. Troubleshooting & Maintenance ............................................................................... 16
8. After-sales Service .................................................................................................... 17
Alfatron ALF-TP405PT
1
1. Introduction
1.1 Introduction to TPHD405PT-WPB
TPHD405PT-WPB is a Decora style transmitter that installs in a double-gang wall box
to provide a convenient interface for HDMI / VGA input sources. It has 1 HDMI IN, 1
VGA IN and 1 HDBaseT OUT with PoC. It supports VGA with full HD scaler, and HDMI
1.4 with 4k& 3D, input signals support auto-switching and manual-switching. The
HDBaseT output supports 60m UHD video transmission with PoC, enables bi-
directional RS232 communication between TPHD405PT-WPB and remote device.
With its PoC solution, TPHD405PT-WPB can be energized by far-end PoC receiver.
1.2 Features
Selectable HDMI/ VGA with audio input
Support VGA output resolution up to 1920x1200
High bandwidth: 10.2Gbps
In-built scaler function, support scaling HDMI/ VGA signals to match the native
resolution of the display
Transmit HDMI signals up to 4K
Compliant with HDMI 1.4, support 1080p 3D
HDCP compliance, equipped with HDCP auto-tracking solution
Provides auto-switching capability
Support multiple control methods including front panel buttons, and RS232, support
bi-directional RS232 pass-through control.
Supports firmware upgrading via USB.
Energize Programmable Control Panel with a DC 12V power output
Powered by local power pack or PoC connection up to 60m
Aluminium design for elegant and better cooling
1.3 Package List
1 x TPHD405PT-WPB
4 x Screws
3 x Pluggable Terminal Blocks (1 2-pin block, 1 3-pin block, and 1 4-pin block)
1 x Face Plate (Selectable)
4 x Screws (for the face plate)
1 x Power Adapter (DC 12V 2A, selectable)
1 x User Manual
Alfatron ALF-TP405PT
2
Notes：Please confirm if the product and the accessories are all included, if not,
please contact with the dealers.
2. Panel Description
2.1 Front Panel
No. Name Description
① Power
indicator Illuminates red when power on
② SOURCE/
AUTO
Used as video source selection button (with backlight off):
Press to select one source, press again to select next
source, switching circularly between HDMI and VGA. The
indicator of the selected input source will illuminate green.
Used as switching mode selection button (with backlight
on):
Press and hold for 3 seconds or more to enter in Auto-
switching mode, the indicator illuminates green when in
auto-switching mode. Press and hold for 3 seconds or more
again to enter in Manual-switching mode.
③ RS232
Serial port, 3-pin pluggable terminal block, connects with the
control terminal to control the TPHD405PT-WPB, supports bi-
directional RS232 control (send control signal from local or
receive control signal sent from far-end devices).
④ VGA IN Connect with VGA source device.
Alfatron ALF-TP405PT
3
The indicator:
illuminate yellow when there is VGA signal input
illuminate green when the signal source is chosen as input
source
turn off when there is no VGA input signal
⑤ AUDIO IN
Connect with the audio output socket of VGA source device,
deliver synchronous audio source with VGA signal source
when choosing VGA as source signal.
⑥ HDMI IN
Connect with HDMI source device.
The indicator:
illuminate yellow when there is HDMI signal input
illuminate green when the signal source is chosen as input
source
turn off when there is no HDMI input signal
⑦ LINK
&HDCP
LINK: Twisted Pair Link status indicator, illuminate green
when successfully connected.
HDCP: HDCP compliance indicator, illuminate green when
the source signals is with HDCP; blink when it is not with
HDCP; and turn off when there is no source signal.
⑧ RESET Press the button to reboot TPHD405PT-WPB.
⑨ FIRMWARE
USB port, used for firmware update
Plug a flash disk or other storage device with update file
(MERGE.bin), and send command 50698% to update
firmware.
2.2 Side Panel
① HDBaseT OUT: RJ45 port, connect with receiver via a CAT5e/6 cable to deliver
Audio/ Video signals, support PoC.
Note: TPHD405PT-WPB support unidirectional PoC, i.e. it can be energized by far-end
receiver but it can’t energize far-end receiver.
Alfatron ALF-TP405PT
4
2.3 Rear Panel
No. Name Description
① Power In Power in port, 2-pin pluggable terminal block, connect with
DC 12V power adapter.
② Power Out Power out port, connect with Programmable Control Panel to
energize it with a 12V power output.
③ RS232
Serial port, connects with a far-end receiver, supports bi-
directional RS232 control (send control signal from local or
receive control signal sent from far-end devices).
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Alfatron ALF-TP405PT
5
3. System Connection
3.1 Usage Precautions
1. System should be installed in a clean environment and has a prop temperature
and humidity.
2. All of the power switches, plugs, sockets and power cords should be insulated
and safe.
3. All devices should be connected before power on.
3.2 System Diagram
3.3 Connection Procedure
Step1. Connect HDMI source device (e.g. Blue-ray DVD) to HDMI input ports of
TPHD405PT-WPB with HDMI cable. Connect a VGA source device (e.g. PC) to
the VGA input port of TPHD405PT-WPB with VGA cable.
Step2. Connect an HDBaseT Receiver to the HDBaseT port on the rear panel with
twisted pair.
Step3. Connect a HDMI display to the HDMI OUT port of HDBaseT Receiver.
Blue-ray
R
e
c
e
i
v
e
r
P
C
Projector
Rs23 2
P
C
Alfatron ALF-TP405PT
6
Step4. Connect a control terminal to the RS232 port on the front panel of HDBaseT
Receiver.
Step5. Connect control device (e.g. PC) to RS232 port of TPHD405PT-WPB or
HDBaseT Receiver (bi-directional RS232 control, either is available).
Step6. Connect DC 24V power adaptor to the power port of HDBaseT Receiver,
TPHD405PT-WPB is able to get power from HDBaseT Receiver with PoC
solution.
Note: TPHD405PT-WPB supports unidirectional PoC, i.e, TPHD405PT-WPB can get
power from far-end PoC devices with PoC function while it can’t energize far-end PoC
devices when the power supply is connected to TPHD405PT-WPB.
3.4 Energizing Programmable Control Panel
TPHD405PT-WPB has a 12V power output port on the rear panel. Connect the 12V
power output port of TPHD405PT-WPB to the power port of Programmable Control
Panel (refer to the following figure), TPHD405PT-WPB is capable of energizing
Programmable Control Panel.
3.5 PoC Solution
TPHD405PT-WPB has an HDBaseT OUTPUT port on the rear panel, which can extend
HDMI/ VGA signals up to 60m. Meanwhile it also supports PoC, which allows several
terminals share the same power supply and eliminates the need for extra power supply
at the remote nodes.
Connect a DC 24V power adapter to the power port of HDBaseT Receiver,
TPHD405PT-WPB can be energized synchronously with PoC solution, see the picture
below:
DC 12V IN
DC 12V OUT
Tabla de contenidos
Otros manuales de Transmisor de ALFAtron
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
