Alfalaval Pressure Relief Valve Manual de usuario

2900-0109

ESE02426-EN1 2013-04

Original manual

Instruction Manual

Unique Sampling Valve - Accessories - Pressure Relief Valves

Table of contents

The information herein is correct at the time of issue but may be subject to change without prior notice

1. Safety .................................................................................................... 4

1.1. Important information ............................................................................. 4

1.2. Warning signs ..................................................................................... 4

1.3. Safety precautions ................................................................................ 5

2. Installation .............................................................................................. 6

2.1. Unpacking/delivery ............................................................................... 6

2.2. General installation ................................................................................ 6

2.3. Recycling information ............................................................................. 7

3. Operation ............................................................................................... 8

3.1. Operation .......................................................................................... 8

3.2. Troubleshooting ................................................................................... 9

3.3. Recommended cleaning ......................................................................... 10

4. Maintenance ........................................................................................... 11

4.1. General maintenance ............................................................................. 11

4.2. Dismantling the valve ............................................................................. 12

4.3. Assembly of valve ................................................................................. 12

5. Product information ................................................................................... 13

5.1. Technical data ..................................................................................... 13

5.2. Product range ..................................................................................... 14

6. Parts list and service kits ............................................................................ 16

6.1. Pressure Relief Valve - sizes 4 and 10 .......................................................... 16

6.2. Pressure Relief Valve - size 25 ................................................................... 18

1 Safety

Unsafe practices and other important information are emphasised in this manual.

Warnings are emphasised by means of special signs.

1.1 Important information

Always read the manual before using the valve!

WARNING

Indicates that special procedures must be followed to avoid serious personal injury.

CAUTION

Indicates that special procedures must be followed to avoid damage to the valve.

NOTE

Indicates important information to simplify or clarify procedures.

1.2 Warning signs

General warning:

Caustic agents:

1 Safety

All warnings in the manual are summarised on this page.

Pay special attention to the instructions below so that serious personal injury and/or damage to the valve are avoided.

1.3 Safety precautions

Installation:

Always read the technical data thoroughly. (See chapter 6 Parts list and service kits)

Always release compressed air after use.

Never touch the moving parts if the actuator is supplied with compressed air.

Never touch the valve or the pipelines when processing hot liquids or when sterilising.

Never dismantle the valve with the valve and pipelines under pressure.

Never dismantlethevalvewhenitishot.

Operation:

Never dismantle the valve with the valve and pipelines under pressure.

Never dismantlethevalvewhenitishot.

Always read the technical data thoroughly. (See chapter 6 Parts list and service kits)

Always release compressed air after use.

Never touch the valve or the pipelines when processing hot liquids or when sterilising.

Never touch the moving parts if the actuator is supplied with compressed air.

Always rinse well with clean water after cleaning.

Always handle lye and acid with great care.

Maintenance:

Always read the technical data thoroughly. (See chapter 6 Parts list and service kits)

Always release compressed air after use.

Never servicethevalvewhenitishot.

Never service the valve with the valve and pipelines under pressure.

Never stick your fingers through the valve ports if the actuator is supplied with compressed air.

Never touch the moving parts if the actuator is supplied with compressed air.

Transportation:

Always ensure that compressed air is released.

Always ensure that all connections is disconnected before attempt to remove from the installation.

Always drain liquid out of valves before transportation.

Always use pre-designed lifting points if available.

Always ensure sufficient fixing of the valve during transportation - if specially designed packaging material is available, it

must be used.

2 Installation

This instruction manual is part of the delivery. Study the instructions carefully.

The items refer to the parts list and service kits section.

2.1 Unpacking/delivery

Step 1

CAUTION

Alfa Laval cannot be held responsible for incorrect unpacking.

Check the delivery for:

1. Valve

2. Instruction manual

Step 2

Remove possible packing materials from the valve/valve parts.

Inspect the valve/valve parts for visible transport damage.

Avoid damaging the valve/valve parts.

2.2 General installation

Always read the technical data thoroughly.

See chapter 5.1 Technical data

CAUTION

Alfa Laval cannot be held responsible for incorrect installation.

Mount the Pressure Relief Valve on the lower connection as shown below.

1. Push down and hold the safety button

2. Pull back the handle

3. Mount the Pressure Relief Valve on the lower connection

on the Sampling Valve

2900-0110

2 Installation

This instruction manual is part of the delivery. Study the instructions carefully.

The items refer to the parts list and service kits section.

2.3 Recycling information

• Unpacking

- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps.

- Wood and cardboard boxes can be reused, recycled or used for energy recovery.

- Plastics should be recycled or burnt at a licensed waste incineration plant.

- Metal straps should be sent for material recycling.

• Maintenance

- During maintenance, oil and wearing parts in the machine are replaced.

- All metal parts should be sent for material recycling.

- Worn or defective electronic parts should be sent to a licensed handler for material recycling.

- Oil and all non-metal wearing parts must be dealt with in accordance with local regulations.

•Scrapping

- At the end of use, the equipment should be recycled according to the relevant, local regulations. As well as the equipment

itself, any hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt,

or in the absence of local regulations, please contact your local Alfa Laval sales company.

3Operation

Study the instructions carefully and pay special attention to the warnings!

Ensure that the valve operates smoothly.

The items refer to the parts list and service kits section.

3.1 Operation

Always read the technical data thoroughly.

See chapter 5.1 Technical data

CAUTION

Alfa Laval cannot be held responsible for incorrect operation.

Danger of burns!

Never touch the valve or the pipelines when processing hot liquids or when sterilising.

The Pressure Relief Valve is used to ensure that the temperature is at the right level when performing steam sterilisation on

the Sampling Valve.

1. Single Seat: Set the actuator to closed position

Double Seat: Set the actuator to seat lift/steam position.

2. Mount a hose on the steam outlet nozzle to ensure that the

steam is led away.

3. Supply steam to the upper connection of the Sampling Valve

(2.5-3.5 bar)

4. When steam appears from the steam outlet nozzle, then

leave the steam on for 2 minutes.

5. Shut off the steam supply.

6. Pull the quick release handle to ensure that no steam

pressure is present in the sampling valve.

7. The Sampling Valve is now clean and ready to take a sample.

We recommend that the Sampling Valve is steam sterilised

after a sample has been taken.

A. Steam inlet

B. Non Return Valve

C. Pressure Relief Valve

D. Quick release of steam

E. Steam outlet nozzle.

Be careful! 2900-0111

3Operation

Study the instructions carefully and pay special attension to the warnings.

Ensure that the valve operates smoothly.

The items refer to the parts list and service kits section.

3.2 Troubleshooting

NOTE!

Study the maintenance instructions carefully before replacing worn parts.

Problem Cause Repair

O-ring worn or damaged Replace o-ring

Steam leakage Membrane worn or damaged Replace membrane

Steam pressure too low Ensure that the supplied steam pressure

is above 2 bars

No steam at nozzle outlet

Blockage of the Pressure Relief Valve Inspect the Pressure Relief Valve and

ensure that nothing is obstructing the

valve

Steam pressure too low Ensure the the supplied steam pressure

is above 2 bars

Steam temperature is below 120 °C at

the Sampling Valve The Pressure Relief Valve opens too early

Inspect the Pressure Relief Valve and

ensure that nothing is obstructing the

valve

3Operation

Study the instructions carefully and pay special attention to the warnings!

Ensure that the valve operates smoothly.

The items refer to the parts list and service kits section.

3.3 Recommended cleaning

Step 1

Always handle lye and acid with great care.

Caustic danger!

Always use

rubber gloves!

Always use

protective goggles!

Step 2

Never touch the valve or the pipelines when sterilising.

Danger of burns!

Step 3

Pay special attention to the warnings!

Step 4

Examples of cleaning agents:

Use clean water, free from chlorides.

1. 1% by weight NaOH at 70 °C

1kgNaOH +100 l water =Cleaning agent.

2.2 l

33% NaOH +100 l water =Cleaning agent.

2. 0.5% by weight HNO3at 70 °C

0.7 l

53% HNO3+100 l water = Cleaning agent.

Step 5

1. Avoid excessive concentration of the cleaning agent.

2. Adjust the cleaning flow to the process.

3. Always rinse well with clean water after cleaning.

NOTE

The cleaning agents must be stored/disposed of in accordance

with current regulations/directives.

Always rinse!

Clean water Cleaning agents

Tabla de contenidos

Otros manuales de Unidad de control de Alfalaval

Alfalaval

Alfalaval LKB Series Manual de usuario

Alfalaval

Alfalaval CSI SSV PN10 Manual de usuario

Alfalaval

Alfalaval SRC Manual de usuario

Alfalaval

Alfalaval SB Manual de usuario

Alfalaval

Alfalaval MCE2035 Manual de usuario

Alfalaval

Alfalaval SB Manual de usuario

Alfalaval

Alfalaval ThinkTop DeviceNet 11 VDC Manual de usuario

Alfalaval

Alfalaval Unique Mixproof Manual de usuario

Alfalaval

Alfalaval EPC-400 Manual de usuario

Alfalaval

Alfalaval Unique Single Seat Valve Manual de usuario

Alfalaval

Alfalaval CPM-2 Manual de usuario

Alfalaval

Alfalaval Unique SSV PN10 Manual de usuario

Alfalaval

Alfalaval Unique SSV PN10 Manual de usuario

Alfalaval

Alfalaval Unique PMO Plus Series Manual de usuario

Alfalaval

Alfalaval SMP-BCA Manual de usuario

Alfalaval

Alfalaval Unique SSV PN10 Manual de usuario

Alfalaval

Alfalaval Unique Mixproof Horizontal Tank Manual de usuario

Alfalaval

Alfalaval Unique SSV PN10 Manual de usuario

Alfalaval

Alfalaval Unique SSV Series Manual de usuario

Alfalaval

Alfalaval REMIND EPC 50 Manual de usuario

Alfalaval

Alfalaval ARC series Manual de usuario

Alfalaval

Alfalaval ThinkTop Digital 8-30 VAC NO/NC Manual de usuario

Alfalaval

Alfalaval 9611-99-5750 Manual de usuario

Alfalaval

Alfalaval LKAP Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario