Alcatel Speed Touch PC Manual de usuario
SPEED TOUCH PC
ADSL PC Network Interface Card
Installation Guide
Microsoft Windows 95A, 98 and NT4.0
VERSION 2.1.1 – for CD-ROM Installation
November 9, 1999
SPEED TOUCH PC
ADSL PC Network Interface Card
Installation Guide
Microsoft Windows 95A, 98 and NT4.0
VERSION 2.1.1– for CD-ROM Installation
November 9, 1999
TABLE OF CONTENTS
Introduction.......................................................................................................... 1
System Requirements........................................................................................... 1
Determining Your Service Type.......................................................................... 3
Technical Support................................................................................................ 3
Before Installation................................................................................................ 4
Hardware Installation........................................................................................... 4
Software Installation and Service configuration.................................................. 4
Point to Point Protocol over ATM (PPPoA) or (RFC 2364).......................... 5
Windows 95A ........................................................................................... 5
Windows 95B............................................................................................ 7
Windows 98, 98A ..................................................................................... 9
Windows NT 4.0..................................................................................... 14
PPPoA ADSL Network Connection ....................................................... 21
Bridged Ethernet Service or (RFC 1483) ................................................... 23
Windows 95A ......................................................................................... 23
Windows 95B.......................................................................................... 25
Windows 98, 98A ................................................................................... 27
Bridged Ethernet ADSL Service Configuration...................................... 29
Windows NT 4.0..................................................................................... 31
Editing Bridged Ethernet ADSL Service Configuration......................... 34
Diagnostic Tools................................................................................................ 36
Appendix A – Upgrade Microsoft DUN Version 1.3........................................ 37
Appendix B – Verifying Dial-Up Networking (DUN) Status........................... 38
Appendix C – Removing Speed Touch PC NIC Drivers................................... 39
Windows 95, 98.......................................................................................... 39
Windows NT4.0 ......................................................................................... 39
Appendix D – System Requirements & Compliance Information..................... 41
Appendix E – Copyright & Regulatory Information......................................... 42
Alcatel Speed Touch™PC
Installation Guide
page 1
INTRODUCTION
Congratulations! You’ll soon have the fastest connection available to the
Internet – thanks to Alcatel’s Speed Touch PC. The Alcatel Speed Touch PC is
an internal Asymmetric Digital Subscriber Line (ADSL) PC Network Interface
Card (NIC), which conveniently plugs into your computer system. Alcatel’s
Speed Touch PC connects directly to your telephone line via a standard RJ-11
connector and is fully plug-and-play compatible.
This guide is designed to walk you through the installation of your Speed Touch
PC in the easiest and quickest way possible. Please follow the instructions
carefully.
SYSTEM REQUIRMENTS
Make sure your PC system meets ALL of the following minimum hardware
requirements and has one of the following software Operating Systems installed.
Note: Install this board only in UL Listed equipment that has instructions stating
that the user may install and remove boards.
Hardware:
IBM PC/AT or compatible
Pentium 100Mhz or faster
30Mbytes available hard disk space or more
2x CD-ROM drive or better
32Mbyte available system memory or more
Software: Your Operating System must be one of the following:
Microsoft Windows 95.x – 95A, 95B
Microsoft Windows 98.x – 98, 98A
Microsoft NT – NT 4.0 Service Pack 3
Provided here for your convenience is a work sheet that will help you gather all
the information you will need to install your Alcatel Speed Touch PC. Please
gather all the necessary information before continuing.
You will need to know the exact version of Microsoft Windows installed in
your computer. If you do not know or are unsure, please proceed as follows to
determine your version of the Microsoft Operating System.
Alcatel Speed Touch™PC
Installation Guide
page 2
On the desktop, right click My Computer. Then select Properties. The version
number of the Microsoft Windows Operating System installed in your computer
will be displayed. Refer to the following table for more detailed information.
Windows
Version System Description on
System Properties Official Release Name (on
Microsoft Web page)
Win 95A 4.00.950A Windows 95 OSR1
Win 95B 4.00.950B Windows 95 OSR2
Win 98 4.10.1998 Window 98
Win 98A 4.10.2222A 2nd Windows 98 2nd Edition
Alcatel Speed Touch™PC
Installation Guide
page 3
DETERMINING YOUR SERVICE TYPE
Contact your Internet Service Provider (ISP) for your service type and
connection configuration. Your service type is one of the following:
1) Bridged Ethernet Service or (RFC 1483)
2) Point to Point Protocol over ATM (PPPoA) or (RFC 2364)
⇒If your service is Bridged Ethernet you will need to know the following:
IP Address . . .
Subnet Mask . . .
Gateway . . .
(Domain Name Service) DNS Host
DNS Domain
1DNS Server . . .
2DNS Server . . .
3DNS Server . . .
The values of VPI and VCI VPI = ____ VCI =______
Default VPI=0, VCI=35
⇒If your service is PPPoA you will need to know the following:
User Name
Password
Logon Domain
The values of VPI and VCI VPI = ____ VCI =______
Default VPI=0, VCI=35
TECHNICAL SUPPORT
•If you have questions regarding your PC system and the Microsoft
Windows Operating System, please contact your original PC manufacturer
or Microsoft for assistance.
•If you have questions regarding Speed Touch PC, please refer to the Speed
Touch PC User Manual contained on the Alcatel CD supplied, or visit the
Web site: www.alcateldsl.com
Alcatel Speed Touch™PC
Installation Guide
page 4
BEFORE INSTALLATION
If you are installing PPPoA service for Win95A, 95B or Bridged Ethernet
service for Win95A, you need to upgrade your Dial-Up Networking (DUN)
application to version 1.3 or above. Please refer to Appendix A on how to
upgrade your system’s DUN.
HARDWARE INSTALLATION
To install the Alcatel Speed Touch PC in your PC, proceed through the
following steps:
WARNING! To avoid possible damage to your Speed Touch PC card you
need to use an anti-static grounding device or hold onto the metal chassis of the
PC to provide anti-static grounding.
1. Shut down the system and switch the power off.
2. Unplug the AC power cable from the PC.
3. Remove the cover from the PC chassis.
4. Unscrew the “slot cover bracket” from an unused PCI slot.
5. Insert the card into an empty PCI slot.
6. Firmly press the Speed Touch PC card into the
slot and secure the card to the chassis with the
chassis bracket screw.
7. Connect one end of a phone cable to the RJ-11
port on the Speed Touch PC card and plug the
other end of the cable into the ADSL data service.
8. Plug the power cable back into the PC system.
9. Power-up the PC and proceed to software installation.
SOFTWARE INSTALLATION AND SERVICE CONFIGURATION
NOTE: You may need the Microsoft Windows Operating System installation
files (CAB files) to complete the installation. The CAB files are contained in
the Microsoft’s system CD. Some systems may have already installed the CAB
files to the hard drive, but you should have the Microsoft CD handy just in case.
Alcatel Speed Touch™PC
Installation Guide
page 5
TO INSTALL POINT TO POINT PROTOCOL OVER ATM SERVICE
Win95A go to page 5
Win95B go to page 7
Win98, 98A go to page 9
NT 4.0 go to page 14
TO INSTALL BRIDGED ETHERNET SERVICE
Win95A go to page 23
Win95B go to page 25
Win98, 98A go to page 27
NT 4.0 go to page 31
POINT TO POINT SERVICE FOR WINDOWS 95A
1. After installing the Alcatel Speed
Touch PC card, power on the PC
system. The Hardware Wizard
will detect the card as a PCI
Network Controller. Select the
Driver from disk provided by
hardware manufacturer option.
Click OK.
2. Insert the Alcatel Speed Touch
PC Driver CD into the drive.
3. The Install From Disk window
appears. Enter the <CD drive
letter> :\PPPoA9x (e.g.
D:\PPPoA9x), then click OK.
4. When the Service Option window
appears, click Next for the default
installation. For Advanced
settings, please consult your
ADSL service provider for
detailed information.
Alcatel Speed Touch™PC
Installation Guide
page 6
NOTE: If you clicked
Advanced, the Service Options
window shows the Connection
Address. Enter the service
Connection Address, click OK.
The previous Service Option
window will appear, click Next.
NOTE: During the installation
process you may be asked to
insert your Windows 95. Insert
the Windows 95 CD into the CD
drive and click OK.
NOTE: If during the file
copying process a file is reported
as “not found” enter the path
<CD Drive letter> :\Win95 (e.g.
D:\Win95)
5. At the conclusion of the Speed Touch PC driver installation, the Diagnostic
Tools icon is active and monitoring connectivity. The Diagnostic Tools –
found on the task bar – with blinking (or solid) Black or Green lights
indicates a good connection. Diagnostic Tools with Red lights indicate a
connection error or driver load error. Verify that the cable is properly
connected to the data port of the service and the Speed Touch PC card.
6. You must now make a network connection, go to page 21.
Alcatel Speed Touch™PC
Installation Guide
page 7
POINT TO POINT SERVICE FOR WINDOWS 95B
1. After installing the Alcatel Speed Touch PC card, power-up the PC
system. The Hardware wizard will detect the Alcatel Speed Touch PC as a
PCI Network Controller, click Next
2. Insert the Alcatel Speed Touch
PC Device Driver CD into the
CD drive. Then click Other
Locations.
Note: If the driver is not detected,
click Back, insert the Speed
Touch PC disk, then click
NEXT.
3. When Select Other Location
window appears, enter <CD drive
letter> :\PPPoA9x (e.g.
D:\PPPoA9x) and click OK.
4. The Update Device Driver
Wizard window appears. Click
Finish. The Insert Disk window
appears. Click OK.
5. The Copying Files window
appears. Enter <CD drive letter>
:\PPPoA9x (e.g. D:\PPPoA9x)
and click OK.
6. When the Service Option window
appears, click Next for the default
installation. For Advanced
settings, please consult your
ADSL service provider for
detailed information.
Otros manuales para Speed Touch PC
1
Tabla de contenidos
Otros manuales de Tarjeta de red de Alcatel
Manuales populares de Tarjeta de red de otras marcas
3Com
3Com EtherLink 3C509B Manual de usuario
TRENDnet
TRENDnet TEG-PCITX Manual de usuario
Cisco
Cisco MC16E Manual de usuario
Delta Electronics
Delta Electronics Braking Modules VFDB Series Manual de usuario
TwinMOS
TwinMOS Booming Manual de usuario
Dialogic
Dialogic Media Board DM/V1200BTEPEQ Manual de usuario
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manual de usuario
National Instruments
National Instruments NI 9234 Manual de usuario
Hama
Hama 49276 Manual de usuario
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manual de operación
Compaq
Compaq Wireless LAN 100 Manual de usuario
Bose
Bose PowerMatch Dante Manual de usuario