Akuvox A092 Series Manual de servicio
Version: 1.0 | Date: Jan.2021
Version: 1.0 | Date: June.2021
About This Manual
Thank you for choosing Akuvox A092 series access controller. This manual is
intended for the administrators who need to properly configure the access
controller. This manual applies to the version 92.30.1.6, and it provides all the
configurations for the functions and features of Akuvox access control.
Please visit Akuvox forum or consult technical support for any new
information or latest firmwares.
Introduction of Icons and Symbols
Warning:
Always abide by this information in order to prevent the persons
from injury.
Caution:
Always abide by this information in order to prevent the damages to
the device.
Note:
Informative information and advice from the efficient use of the
device.
Tip:
Useful information for the quick and efficient use of the device.
LED Indicator Light Status
No
Icons
Indicator
Light
Light status
Description
1
Power
indicator
On
The light turns on when
the device is powered on
Off
The light turns off when
the device is powered off
2
Warning
Indicator
Permanently
on
The orange light will stay
on when the device failed
to obtain the IP address
Off
The light will be off when
the device is in normal
status
Flashing
slowly
The light will be flashing
slowly when the device
upgrade failed
The light will be flashing
slowly during the
upgrading process.
Flashing
quickly
The light will be flashing
slowly when the device is
restarted after the upgrad
e failure
Table of Contents
1. Product Overview....................................................................................................1
2. Access the Device...................................................................................................2
2.1. Obtain Device IP Address...........................................................................2
2.2. Access the Device Web Interface..............................................................2
3. Language and Time Setting.................................................................................. 4
3.1. Language Setting........................................................................................ 4
3.2. Time Setting................................................................................................. 4
4. Network Configuration...........................................................................................6
4.1. Network Status............................................................................................ 6
4.2. Device Network Configuration...................................................................6
4.3. Configure Web Server................................................................................. 7
4.4. TR069............................................................................................................ 8
4.5. SNMP.............................................................................................................9
5. Relay Setting......................................................................................................... 11
5.1. Configure Built-in Relay........................................................................... 11
5.2. Configure Web relay.................................................................................. 12
6. Door Access Schedule Management................................................................ 14
6.1. Configure Door Access Schedule........................................................... 14
6.1.1. Create Door Access Schedule......................................................14
6.2. Import and Export Door Access Schedule............................................ 16
6.3. Edit the Door Access Schedule............................................................... 16
7. Door Unlock Configuration................................................................................. 18
7.1. Configure Access Card Format............................................................... 18
7.2. Configure Access Card for Door Unlock................................................ 18
7.3. Edit/Delete Access card Control schedule............................................21
7.4. Configure open relay via HTTP for door unlock................................... 22
7.5. Configure Exit Button for Door Unlock...................................................23
8. Security.................................................................................................................. 25
8.1. Security Notification Setting................................................................... 25
8.1.1. Email Notification Setting.............................................................25
8.1.2. FTP Notification Setting................................................................26
9. Call Log.................................................................................................................. 28
10. Debug................................................................................................................... 30
10.1. Configure Debug Server......................................................................... 30
10.2. System Log for Debugging....................................................................30
10.3. PCAP for Debugging...............................................................................31
11. Firmware Upgrade..............................................................................................33
12. Backup................................................................................................................. 34
13. Auto-Provisioning via configuration File....................................................... 35
13.1. Provisioning Principle............................................................................ 35
13.2. Configuration Files for Auto-provisioning.......................................... 36
13.3. AutoP Schedule....................................................................................... 37
13.4. Static Provisioning Configuration........................................................ 38
14. Integration with Third Party Device................................................................ 40
14.1. Integration via Wiegand......................................................................... 40
14.2. Integration via RS485............................................................................. 40
14.3. Configure HTTP API for the Third-party Integration......................... 41
14.4. Power Output Control.............................................................................43
15. Account &Password.......................................................................................... 44
16. System Reboot&Reset...................................................................................... 45
16.1. Reboot.......................................................................................................45
16.2. Reset......................................................................................................... 46
17. Abbreviations......................................................................................................47
18. FAQ....................................................................................................................... 49
19. Contact us........................................................................................................... 52
A092 Access Controller Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
1
1.Product Overview
Akuvox A092 series access controller is Android-based. It has multiple ports,
such as RS485 and Wiegand ports that can be used to easily integrate with
external digital systems, such as card readers, elevator controller and fire
alarm detector, helping to create a holistic control of building entrance and
its surroundings. With the two in-built relays, A092 is capable of controlling
two doors maximum while giving you a great sense of security via card
access. A092 is applicable to such applications as commercial buildings,
hospital buildings and warehouses.
A092 Access Controller Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
2
2.Access the Device
Akuvox A092 access controller system settings can be accessed on the on
the device web interface.
2.1. Obtain Device IP Address
To access the device web interface, you need to obtain the device IP address
using Akuvox IP scanner.You can just click Search to find the device IP
address
2.2. Access the Device Web Interface
Enter the device IP address on the web browser in order to log in the device
web interface where you can configure and adjust parameter etc. The Initial
user name and password are “admin” and please be case-sensitive to the
user names and passwords entered.
A092 Access Controller Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
3
Note:
Google Chrome browser is strongly recommended.
Otros manuales para A092 Series
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de acceso IP de Akuvox
Akuvox
Akuvox A03S Manual de usuario
Akuvox
Akuvox R29C-L Manual de usuario
Akuvox
Akuvox A01 Manual de usuario
Akuvox
Akuvox R29X Manual de usuario
Akuvox
Akuvox A092 Series Manual de usuario
Akuvox
Akuvox A01 Manual
Akuvox
Akuvox A05 Series Manual de servicio
Akuvox
Akuvox A092 Series Manual de usuario
Akuvox
Akuvox A02 Manual de servicio
