Akuvox R28 Series Manual de usuario
R28A R28V
R28 Series Door Phone User Manual
About This Manual
Thank you for choosing Akuvox’s R28A/V door phone. This manual is intended for end users who need to properly configure the
door phone. This manual is applicable to 28.0.3.xx version, and it provides an overview of the most essential functions and features
of the product. Please visit Akuvox forum or consult technical support for any new information or latest firmware.
Note: Please refer to universal abbreviation form in the end of manual when meet any abbreviation letter.
Content
1. Product Overview............................................................................................................................................................................................... 1
1.1. Product Description.................................................................................................................................................................................... 1
1.2. Connector Introduction...............................................................................................................................................................................1
2. Daily Use............................................................................................................................................................................................................... 3
2.1. Make a Call.................................................................................................................................................................................................. 3
2.2. Receive a Call............................................................................................................................................................................................. 3
2.3. Unlock........................................................................................................................................................................................................... 4
2.3.1. Unlock by Public Pin Codes............................................................................................................................................................4
2.3.2. Unlock by Private Pin Codes.......................................................................................................................................................... 4
2.3.3. Unlock by RFID Cards (Optional).................................................................................................................................................. 5
2.3.4. Unlock by DTMF Codes.................................................................................................................................................................. 5
1
R27A/C
User Manual
1. Product Overview
1.1. Product Description
Akuvox R28 is a SIP-compliant, hands-free and video door phone.
It can be connected with Akuvox indoor monitors for remote access
controlling and monitoring. Users can communicate with visitors via
audio and video calls, and unlock the door if they need. Users can
also use RFID cards to unlock the door (R28A only). It is applicable
in apartments, offices and so on.
1.2. Connector Introduction
Ethernet (POE): Ethernet (POE) connector which it can provide
both power and network connection.
12V/GND: External power supply terminal if POE connector is not
available.
RS485A/B: RS485 terminal.
Figure 1.2-1 R28’s interface
Figure 1.1 Product description
2
R27A/C
User Manual
WG_D0/WG_D1: Wiegand terminal.
DOORA/B/C: Trigger signal input terminal.
RelayA/B/C (NO/NC/COM): Relay control terminal.
12V_OUT/GND_OUT: Power output terminal.
Note: The general door phone interface diagram is only for
reference.
Figure 1.2-2 General interface
3
R27A/C
User Manual
2. Daily Use
2.1. Make a Call
Call: Users can make a call by entering room number, SIP
extension or IP address and then press “Dial key.”
Security center call ：Users can make a speed dial to security
center by pressing “Dial Key” directly.
Call from contacts: Users can press “Up/Down key” to enter
contacts interface, select the contact to dial to by pressing up/down
key on contacts interface and press “Dial key” to make a call.
Figure 2.1-1 Idle interface
Figure 2.1-2 Contacts interface
4
R27A/C
User Manual
2.2. Receive a Call
R28 will auto answer the incoming call by default. If users disable
auto answer function, they can press “Dial key” to answer the
incoming call.
Figure 2.2 Incoming call interface
5
R27A/C
User Manual
2.3. Unlock
Unlock by Public Pin Codes
Users can unlock doors by using predefined public pin code. Press
“#,” public pin code, “#” to unlock, and then users will hear “The
door is now opened.” If users press wrong public pin code, the
screen will show “Incorrect PIN.” The default public pin code is
33333333. The default public pin code is 8 digits, and it can be
changed to 3 to 8 digits.
Unlock by Private Pin Codes
Users can unlock doors by using predefined private pin code. Press
“#,” private pin code, “#” to unlock, and then users will hear “The
door is now opened.” If users press wrong private pin code, the
screen will show “Incorrect PIN.” The default private pin code is 8
digits, and it can be changed to 3 to 8 digits.
Figure 2.3.1-1 Unlock interface
Figure 2.3.1-2 Unlock failed interface
6
R27A/C
User Manual
Unlock by RFID Cards (Optional)
Place the predefined user cards in RFID card reader to unlock.
Under normal conditions, R28A will announce “The door is now
opened.” If the card has not been registered, R28A will show
“Unauthorized.” Both 13.56MHz and 125KHz RFID cards are
supported on R28A.
Unlock by DTMF Codes
Users can press the predefined DTMF code from an answer unit to
remotely unlock the door during the call. Users will also hear “The
door is now opened.”
R27A/C
User Manual
Abbreviations
ACS: Auto Configuration Server
Auto: Automatically
AEC: Configurable Acoustic and Line Echo Cancelers
ACD: Automatic Call Distribution
Autop: Automatical Provisioning
AES: Advanced Encryption Standard
BLF: Busy Lamp Field
COM: Common
CPE: Customer Premise Equipment
CWMP: CPE WAN Management Protocol
DTMF: Dual Tone Multi-Frequency
DHCP: Dynamic Host Configuration Protocol
DNS: Domain Name System
DND: Do Not Disturb
DNS-SRV: Service record in the Domain Name System
FTP: File Transfer Protocol
GND: Ground
HTTP: Hypertext Transfer Protocol
HTTPS: Hypertext Transfer Protocol Secure
IP: Internet Protocol
ID: Identification
IR: Infrared
LCD: Liquid Crystal Display
LED: Light Emitting Diode
MAX: Maximum
POE: Power Over Ethernet
PCMA: Pulse Code Modulation A-Law
PCMU: Pulse Code Modulation µ-Law
Otros manuales para R28 Series
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Akuvox
Akuvox
Akuvox C317A Manual de usuario
Akuvox
Akuvox C313 Series Manual de usuario
Akuvox
Akuvox R20A Manual de usuario
Akuvox
Akuvox E18 Manual de usuario
Akuvox
Akuvox R20B Series Manual
Akuvox
Akuvox E21V Manual de usuario
Akuvox
Akuvox C312 Series Manual de usuario
Akuvox
Akuvox R27A Manual
Akuvox
Akuvox R23X Manual de usuario
Akuvox
Akuvox E16 Series Manual de servicio
Akuvox
Akuvox R20 Series Manual
Akuvox
Akuvox R20AS Manual de usuario
Akuvox
Akuvox R20A Manual
Akuvox
Akuvox R29C Instrucciones de montaje
Akuvox
Akuvox C317S Manual de usuario
Akuvox
Akuvox A01X Manual de usuario
Akuvox
Akuvox IT81 Manual de usuario
Akuvox
Akuvox E16 Series Manual de servicio
Akuvox
Akuvox R27 series Manual
Akuvox
Akuvox X912 Manual de usuario
