Akai AR321S Manual de usuario

第1 页共5 页

LOCATION OF CONTROLS

1. Power Button

2. Timer Button

3. Mode Button

4. Sound Button

5. Turning Control

6. Lamp Light Adjust

7. LCD Display

8. Turning Scale

9. Snooze/Sleep Button

10. Down/Temperature Mode Adjust Button

11. Up Button

12. Set Button

13. Lamp Button

14. Reset Button

15. AC Power Jack

16. FM Antenna

17. Battery Compartment

18. Speaker

19. AM/FM Wave Band

20. Temperature Antenna

RADIO OPERATION

1. Open battery compartment, insert 4pcs AA size batteries according to the

indicated direction, slide the battery cover back in position or plug the Power

Cord, and then the time will display. The display time is”12:00am, 1st January,

2009, Tuesday”.

2. Press POWER button to turn on the alarm, push wave band button to select

AM/FM, rotate the PVC button to select favorite radio station, press Up/Down

button to set desired listening level. Press POWER button again to turn off the

radio.

第2 页共5 页

NATURAL MUSIC OPERATION

1. Press SOUND button to enter into natural music mode , adjust VOLUME

control to proper volume; press Sound button again to turn off the music

2. Press SOUND button again to select different natural music, total 5musics for

selecting (1.Cricket 2.rain 3.river 4.bird 5.seagull and wave)

3. Under sound mode, press the Model button once to turn back to the time

display

LCD BACKLIGHT & LAMP LIGHT OPERATION

1. Press any button once, the backlight will light for 8seconds, then automatically

off

2. When it is alarm time or the radio is on or enjoy the natural music, backlight will

light for 8seconds and then automatically off.

3. Under any mode (except the alarm is on), press the LAMP button or rotate the

Lamp Light Adjust button to turn on the lamp

4. Press the Set button and Up/Down button to set desirable lighting time of the

lamp: 10MINUTES – 20MINUTES -30MINUTES ……

5. when the lamp is light, adjust Lamp Light button to your favorite brightness

6. Press the LAMP button or push the Lamp Light Adjust button to “zero” to turn

off the lamp.

7. If the brightness of the lamp was set to “zero”, when the alarm on, the lamp will

not light.

8. To prolong the battery use time, lamp just can be light when connect to AC

power

TIME/ ALARM OPERATION

1. TIME/ DATE ADJUST

1) Under normal mode, press SET button 3 seconds to 12/24 mode transfer

2) Under normal mode, Press SET button and UP/DOWN button to set the time in

order

(HOUR-MINUTE-YEAR-MONTH-DATE-NORMAL TIME DISPLAY)

第3 页共5 页

3) When just press SET button, it will be back to normal time display after

1minute.

4) Range of time: Year: 2000~2099; Month: 1~12; Date: 1~31; Hour: 1~12 or

0~23; Minute: 0~59

5) When setting the date, the week will change accordingly. When setting the year

and month, it will restraint the maximum day .when setting the minutes, the

seconds will clear to “zero”

6) Hold the UP/DOWN button ceaselessly can set time quickly

2．ALARM SETTING

1. Under time setting mode, press Mode button once to enter into Alarm 1 set

mode. Press Mode button twice to enter into Alarm 2 set mode. The “TIME

“show the alarm time , “WEEK “show the alarm output mode, “MONTH,

DATA” show the lighting time

2. Under alarm setting mode, press the SET button to the alarm setting, the

volume and lamp control function will turn off automatically and controlled by

the alarm setting. Press the Set button and Up/Down Button to set the following

function in order: Hour- Minute- Alarm Output Model-Brightness-Volume -

Lighting Time

3. Press any button to stop alarm or it will automatically stop alarming after 1

minute.

4. Under each mode, press Up/Down button to set desirable volume.

5. Press Up/Down button or rotate the Lamp Light Adjust button to adjust the

brightness.

6. Press the Set button and Up/Down Button to set the advanced lighting time of

the lamp: 0MINUTES –5MINUTES-10MINUTES-15MINUTES-20 MINUTES-25

MINUTES-30 MINUTES-45 MINUTES. The lamp will light up automatically

when it reaches the advanced lighting time before the alarm active.

7. Total 9 music for alarm output mode selecting: 6 natural music, “BeBeBeBe”

sound, radio(AM/FM)

第4 页共5 页

Notice:

A. Hold the UP/DOWN button ceaselessly can set time quickly

B. If the alarm time of the Alarm1 and Alarm2 is the same, only the Alarm 1

will work.

C. The volume of the alarm should not be less than 10.

D. When the alarm is on, the Alarm1 or Alarm 2 indicator will blink.

E. When the alarm is on, Press any button (except Snooze button) to turn off

the alarm.

F. The volume of the alarm must reach the target volume within 1 minute.

SNOOZE FUNCTION

When the first alarm, press SNOOZE button to snooze function (When it is radio

alarm, without snooze function), the snooze indicator will blink, and it will wake you

up again after9 minutes (totally alarm 10 times). If no actions is taken when alarm is

on, the music or buzzer will keep on for3minutes and shut off automatically, the

alarm will on again at the same time next day.

SLEEP FUNCTION

1. Press SLEEP button to sleep function

2. Press SLEEP button to set radio/music time: OFF –10MINUTES –

20MINUTES –30MINUTES–-40minutes–50minutes–-60minutes–-70minutes

–-80minutes –90MINUTES –OFF

3. When sleep function is on, sleep indicator will blink, no indicator when sleep

function is turn off

TIMER FUNCTION

1. Press the TIMER button to the timer setting mode.

2. Press SET button and Up/Down button to set the following function:

Time-Alarm Output Mode-Volume-Brightness-Lighting time.

3. Press the TIMER button again to turn off the timer function

4. Total 9 music for selecting, adjustable timer up to 99 hours.

第5 页共5 页

TEMPERATURE DISPLAY FUNCTION

Under temperature display mode, press DOWN C/F to transfer ℃/℉display.

BATTERY BACKUP

Insert 4pcs AA size batteries in the battery compartment. Should there be a power

failure, the clock will continue to function but the battery does not illuminate the lamp

SPECIFICATION

1. Frequency Range: FM:87.5～108.5MHz AM:530～1700KHz

2. Main Power Supply: AC 7.0V

3. External Power Supply: AC 120V～60HZ DC 7V～450Ma

4. Time display: 12/24 hour format

5. Battery backup: DC 6.0V

NOTICES:

1）When product with receiving problem or display is vague or sound is not

good, should change the battery

2）When product without use for long time, should take the battery out to

avoid affecting the product function

3）When product LCD display in disorder, please press RESET button

4）When product reset affected by hight voltage static and cause in disorder,

please press RESET button to reset.

5）Under any state, if no key was pressed it will be back to normal time

display after 30 seconds

6）If the Alarm, Timer and Sleep function occurs simultaneously, it will only

execute one of them according to the following order: ALM1- ALM2-Timer- Sleep.

7）It is a gradual process to turn on or off the volume and lamp, the system

will remember the last setting value, the power default of the volume and brightness

separately is “15”and “10”.if the last setting value is “0”, in order to make it work well,

the system will set volume and brightness to the power default automatically.

Tabla de contenidos

Otros manuales de Radio reloj de Akai

Manuales populares de Radio reloj de otras marcas

Denver

Denver CRQ-105 Manual de usuario

Audiovox

Audiovox CE90 Manual de usuario

Sony

Sony Dream Machine ICF-C763L Manual de usuario

Sanyo

Sanyo DMP-P6 Manual de usuario

RCA

RCA RPC100 Manual de usuario

Yamaha

Yamaha ISX-80 Manual de usuario

Pyle

Pyle PLMR20W Manual de usuario

Blaupunkt

Blaupunkt CR7BK Manual de usuario

Philips

Philips AJ3180 Manual de usuario

HoMedics

HoMedics SS-5500-2EU Manual de usuario

RCA

RCA RC66i Manual de usuario

Versaudio

Versaudio Vers Manual de usuario

SOUNDMASTER

SOUNDMASTER UR8100 Manual de usuario

Audiovox

Audiovox CE90 Manual de usuario

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Manual de usuario

Roberts

Roberts ChronoDAB Manual de usuario

AEG

AEG MRC 4132 BT Manual de usuario

Tokai

Tokai TC-155 Manual de usuario