AJAX Systems StreetSiren Manual de usuario

Outdoor Siren User Manual

Outdoor Siren is a wireless outdoor alerting device with a sound volume of

up to 113 dB. Equipped with a bright LED frame and pre-installed battery,

Outdoor Siren can be quickly installed, set up, and operate autonomously

up to 5 years.

Connecting to the Ajax security system via the secured Jeweller radio

protocol, Outdoor Siren communicates with the hub at a distance of up to

1,500 m in line of sight.

The device is set up via the Ajax apps for iOS, Android, mac OS, and

Windows. The system notifies users of all events through push

notifications, SMS, and calls (if activated).

Outdoor Siren operates with Ajax hubs only and does not support connecting via uart

Bridge or oc Bridge Plus integration modules.

The Ajax security system can be connected to a central monitoring station

of a security company.

Functional elements

1. LED frame

2. Light indicator

3. Siren buzzer behind the metal net

4. Smart Bracket attachment panel

5. External power supply connection terminals

6. QR code

7. On/off button

8. Place of fixing the Smart Bracket panel with a screw

Operating Principle

Outdoor Siren significantly improves the efficiency of the security system.

With a high probability, its loud alarm signal and light indication is sufficient

to attract the attention of neighbours and deter intruders.

The siren can be seen and heard from far away due to the powerful buzzer

and bright LED. When installed properly, it is hard to dismount and switch

off the actuated siren: its body is sturdy, the metal net protects the buzzer,

the power supply is autonomous, and the on/off button is locked during the

alarm.

To detect removal or tearing off from the surface, Outdoor Siren uses the

built-in accelerometer (motion detector). When someone tries to move the

device —the alarm goes off.

Connecting

Before starting the connection:

1. Following the hub user guide, install the Ajax app. Create an account, add

the hub, and create at least one room.

2. Switch on the hub and check the internet connection (via Ethernet cable

and/or GSM network).

3. Make sure that the hub is disarmed and does not update by checking its

status in the Ajax app.

Only users with administrator rights can pair the device with the hub

Pairing the device with the hub:

1. Select Add Device in the Ajax app.

2. Name the device, scan or type the QR code (located on the detector body

and packaging), and select the location room.

3. Tap Add —the countdown will start.

4. Switch on the device by holding the power button for 3 seconds.

The on/off button is recessed into the body of the siren and quite tight, you can use a thin solid

object to press it.

For detecting and pairing to occur, the device should be located within the

coverage of the wireless network of the hub (at the same protected object).

The connection request is transmitted briefly: at the moment of switching

on the device.

Outdoor Siren switches off automatically after failing to connect to the hub.

To retry the connection, you do not need to switch it off. If the device has

already been assigned to another hub, switch it off and follow the standard

pairing procedure.

The device connected to the hub appears in the list of devices in the app.

The update of the detector statuses in the list depends on the device ping

interval set in the hub settings (the default value is 36 seconds).

Please note that only 10 sirens can be connected to one hub

States

1. Devices

2. Outdoor Siren

Parameter

Value

Temperature

The temperature of the device which is measured on the

processor and changes gradually

Jeweller Signal Strength

The signal strength between the hub and device

Connection

The connection status between the hub and device

Battery Charge

Battery level of the device

Lid

The tamper button state, which reacts to the opening of

the device body

Routed Through ReX

Displays the status of using the ReX range extender

External Power

The external power supply state

Alarm Volume

Volume level in case of alarm

Alarm Duration

Duration of the alarm sound

Alert if moved

The state of the accelerometer alarm

Armed mode indication

The state of armed mode indication

Beep when arming/disarming

The state of indication of security mode changing

Beep on delay

The state of beeping arming/disarming delays

Beep Volume

The volume level of the beeper

Firmware

Siren firmware version

Device ID

Device identifier

Settings

1. Devices

2. Outdoor Siren

3. Settings

Setting

Value

First field

Device name, can be edited

Room

Selecting the virtual room to which the device is assigned

Alarms in group mode

Selecting the security group to which the siren is assigned.

When assigned to a group, the siren and its indication are

related to alarms and events of this group. Regardless of the

group selected, the siren will respond to Night Mode activation

and alarms.

Alarm Volume

Choosing one of the three volume* levels: from 85 dB —the

lowest to 113 dB —the highest

*the volume level was measured at a distance of 1 m

Alarm Duration (sec)

Settling the time of the siren alarm (from 3 to 180 seconds per

alarm)

Alarm if moved

If active, the accelerometer reacts to moving or tearing off

from the surface

Armed mode indication

If activated, the siren LED blinks once every 2 seconds when the

security system is armed

Beep when arming/disarming

If activated, the siren indicates arming and disarming by LED

frame blink and a short sound signal

Beep on delay

If activated, the siren will beep delays (available from 3.50 FW

version)

Beep Volume

Selecting the volume level of the siren beeper when notifying

about arming/disarming or delays

Volume test

Starting the siren volume test

Jeweller Signal Strength Test

Switching the device to the signal strength test mode

Attenuation Test

Switching the siren to the signal fade test mode (available in

devices with firmware version 3.50 and later)

User Guide

Opens the siren User Guide

Un pair Device

Disconnects the siren from the hub and deletes its settings

Indication

Event

Indication

Alarm

Emits an acoustic signal (the duration depends on the settings)

and the LED frame blinks red

Switching on

The LED frame blinks once

Switching off

The LED frame lights up for 1 second, then blinks three times

Registration failed

The LED frame blinks 6 times in the corner then full frame

blinks 3 times and the siren switches off

Security system is armed (if

indication activated)

The LED frame blinks one time and the siren emits a short

sound signal

Security system is disarmed (if the

indication is activated)

The LED frame blinks two times and the siren emits two short

sound signals

Siren in the armed mode (if the

indication is activated)

The LED frame corner lights up every 2 seconds

When Outdoor Siren is powered externally, its LED frame

glows permanently in the corner (for firmware version 3.41.0

and higher)

Low battery

The LED frame corner lights up and goes out when the system

is armed/disarmed, the alarm goes off, in case of dismounting

or unauthorized opening

Performance Testing

The Ajax security system allows conducting tests for checking the

functionality of connected devices.

The tests do not start straight away but within a period of 36 seconds when

using the standard settings. The test time start depends on the settings of

the detector polling period (the Jeweller menu settings in hub settings).

Installing

The location of the siren depends on its remoteness from the hub, and

obstacles hindering the radio signal transmission: walls, floors, large

objects.

Check the Jeweller signal strength at the installation location

If the signal level is low (one bar), we cannot guarantee stable operation of

the detector. Take all possible measures to improve the quality of the

signal. At least, move the detector: even a 20 cm shift can significantly

improve the quality of signal reception.

If the detector has low or unstable signal strength even after moving, use

a ReX Radio signal range extender.

Outdoor Siren is protected from dust/moisture (IP54 class), which means it

can be placed outdoors. The recommended installation height is 2.5 meters

and higher. Such a height hinders access to the device for intruders.

When installing and using the device, follow the general electrical safety

rules for electrical appliances, as well as the requirements of regulatory

legal acts on electrical safety.

It is strictly prohibited to disassemble the device under voltage! Do not use the device with a

damaged power cord.

Mounting

Before mounting Outdoor Siren, make sure that you have selected the

optimal location and it is in compliance with the guidelines of this manual!

Tabla de contenidos

Otros manuales de Sensor de seguridad de AJAX Systems

AJAX Systems

AJAX Systems MotionCam Manual de usuario

AJAX Systems

AJAX Systems MotionProtect Outdoor Manual de usuario

AJAX Systems

AJAX Systems DoorProtect Manual de usuario

AJAX Systems

AJAX Systems GlassProtect Manual de usuario

AJAX Systems

AJAX Systems MotionCam Manual de usuario

AJAX Systems

AJAX Systems Hub Plus Manual de usuario

AJAX Systems

AJAX Systems DoorProtect Manual de usuario

AJAX Systems

AJAX Systems DoorProtect Plus Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario