aiTerminal Miner Plus Manual de usuario
1
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
Aitek Miner Plus
Model: AMP-500-01
USER MANUAL
2
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
Table of Contents
1. PACKAGE CONTENT .....................................................................................................3
2. PRODUCT SPECIFICATIONS ......................................................................................4
3. INTRODUCTION................................................................................................................4
4. NETWORK SYSTEMS ....................................................................................................5
5. INTERFACE DESCRIPTION .........................................................................................5
6. LED INDICATOR DESCRIPTION ................................................................................6
7. USER INSTRUCTION......................................................................................................7
7.1 Download the mobile app. ......................................................................................7
7.2 Configure network connection..............................................................................7
8. PART SIZE (MM) ............................................................................................................ 10
9. MOUNTING GUIDE ....................................................................................................... 11
APPENDIX – A......................................................................................................................... 12
3
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
1.PACKAGE CONTENT
Package Content
Quantity
Description
1
Aitek Miner Plus
1
LoRa Antenna
1
Power Adaptor
1
Mounting Bracket (attached to
the Miner Plus)
2
Mounting Screw
4
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
2.PRODUCT SPECIFICATIONS
Aitek Miner Plus
Product Specifications
CPU
Quad-core A55
RAM
2GB LPDDR4/ LPDDR4X
Flash
64GB eMMC 5.1
WIFI
802.11 b/g/n WLAN
Bluetooth
BT5.1/BLE+EDR
RF Connectivity
Frequency Band
US915
Frequency
902-928MHz
Channel Capacity
8-channels uplink, 1-channel downlink
Work model
Half duplex
Output Power
≤1W
Connectors
Antenna
LoRa, SMA-K
Ethernet
10/100M
Power
DC12V/1A
Button
Activate Bluetooth
SD Card slot
Mini USB com port
Environment & Others
Operating Temperature
0℃to 60℃
Storage Temperature
-40℃to 85℃
Relative Humidity
20% - 90%, non-condensing
Dimensions（L*W*H)
175.9 x 148.5 x 51 mm
Color
Silver
3.INTRODUCTION
Aitek Miner Plus is a high-performing indoor IoT hotspot gateway compatible with
Helium Network (www.helium.com), which combines the leading wireless LongFi
protocol and Helium Blockchain technology.
Aitek Miner Plus is compatible with all LongFi devices.
Aitek Miner Plus is designed with ECC608 crypto chip to provide secure and
reliable connectivity. It meets Helium security protocol and provides trouble-free
operations for end users. Additional benefits include:
•Operates with ultra-low power consumption (5W)
•Covers more than 10 miles signal range
•Provides connectivity to thousands of LongFi end nodes within its range
5
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
4.NETWORK SYSTEMS
Aitek Miner Plus hotspot gateway integrates LongFi packets with Helium Miner.
The hotspot sends the received LoRa terminal data packets to Helium Miner,
then forwards them to the Console (Network Server) via the Miner. After that,
pushes it to the application platform via the API interface.
5.INTERFACE DESCRIPTION
Antenna
port
(LoRa)
TF Card
Bluetooth
Connect
Button
Mini-USB
Com port
RJ45 Ethernet
Port
12V DC
Input
Helium
Network
Helium
Blockchain
Aitek Miner Plus
Gateway/Hotspot
LoRa RF Devices
or RF Sensors
RF
WiFi
BT
Ethernet
6
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
6.LED INDICATOR DESCRIPTION
The different colors of the LEDs represent different working states of the device.
Status LED
Color
Indicator Status
Description
The gateway is configured and operating
normally.
The network connection is normal.
The gateway is in standby/off-line mode
The network is not connected
The gateway power-on initialization
status
Bluetooth is activated, can be scanned
and connected
Press BT BOTTON for 2 seconds to
activate
No LED light
Power off
The device is not powered on
Please note: During software update, after connecting to the network, the
green light may not be turned on immediately. The green light will turn on
after the normal update and the hotspot is paired to the network successfully.
7
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
7.USER INSTRUCTION
7.1 Download the mobile app.
Download the app using Apple iPhone:
oGo to Apple app store button, search for Helium app.
oDownload and install the Helium app
oRun the Helium app
oContinue to step 7.2
Apple app store Helium app
Download the app using Android phone:
Go to Google Play store,
oGo to Google Play Store, search for Helium app.
oDownload and install the Helium app
oRun the Helium app
oContinue to step 7.2
Google play store Helium app
7.2 Configure network connection
7.2.1 Equipment hookup
Connect the antenna by inserting the SMA male connector to the LoRa antenna
port. Turn the nut of the connector until it is fully tightened.
Antenna
port
(LoRa)
8
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
7.2.2 Set up distribution network –Using WiFi, Ethernet or Bluetooth
Open the Helium App from your phone, register to enter and select "Set up
Hotspot".
Select Aitek Miner Plus, read the “network configuration instructions” if you
haven’t read it, or bypass the “network configuration instructions”by select "Skip"
to follow the on-boarding step by step prompts on the app.
Once ready, power up the gateway by plugging in the power adapter AC end to
an AC power outlet and plug the DC end to the DC 12V socket on the device.
After plugging in the power, the LED of the gateway turns red and then yellow.
Below steps showing three methods of pairing the Aitek’s Miner Plus hotspot.
Please note, only one of the three method is needed to pair up the device.
1. WiFi pairing:
If you use WiFi pairing technique, select the WiFi from the app, select the name
of the WiFi router you are networking with. Enter the network password and
press “next”. Follow the app’s step by step process. Once on-boarding is
successful, the LED light will turn green.
2. Bluetooth pairing:
Insert a pin into the BT BUTTON hole and press the button for 2 seconds, then
watch the LED turn blue to start Scan. After scanning the device, click to enter
the next step. Follow the app’s step by step process.
At this step, the network pairing is completed, LED color will change from blue to
green.
Device Power
Input
9
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
3. Ethernet Cable Connection
Ethernet connection requires connecting an Ethernet cable from Aitek’s Miner
Plus to the network router equipment (the Ethernet cable is provided by the
customer). Suggest to use CAT 6 or better rated Ethernet cable when possible.
Please note that the Ethernet connection currently only supports automatic IP
acquisition.
Follow the app’s step by step process. Once on-boarding is successful, the LED
light will turn green.
Bluetooth
button
RJ45 Ethernet
Connector
10
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
8.PART SIZE (MM)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de Puerta de otras marcas
LST
LST M500RFE-AS Manual de usuario
Kinnex
Kinnex Media Gateway Manual de usuario
2N Telekomunikace
2N Telekomunikace 2N StarGate Manual de usuario
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario
Telsey
Telsey CPVA 500 - SIP Manual de usuario
