AirLive WLA-5200AP Manual de usuario

Quick Setup Guide

WLA

5200A

802.11a/b/g Multi-function

Wireless Access Point

English ●●●

Polski ●●●

Español ●●●

Deutsch ●●●

Česky ●●●

Русский ●●●

Português ●●●

日本語 ●●●

Slovensky ●●●

English

802.11 a/b/g Wireless AP

WLA

00AP

Declaration of Conformity

We, Manufacturer/Importer

OvisLink Corp.

5F., NO.6, Lane 130, Min-Chuan Rd.,

Hsin-Tien City, Taipei County, Taiwan

Declare that the product

802.11a/b/g Multi-function Wireless Access Point

WLA-5200AP

is in conformity with

In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive

Clause Description

■ EN 301 893 V1.2.3 Broadband Radio Access Network(BRAN); 5GHz high

(2003-08) performance RLAN; Harmonized EN Covering essential

requirements of Article 3.2 of the R&TTE Directive.

■ EN 300 328 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM)

(2004-11) Wideband transmission equipment operating in the 2.4GHz ISM band

And using spread spectrum modulation techniques; Part 1：technical

Characteristics and test conditions Part2：Harmonized EN covering

Essential requirements under article 3.2 of the R&TTE Directive

■ EN 301 489-1 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);

(2004-11) Electromagnetic compatibility(EMC) standard for radio equipment and

■ EN 301 489-17 V1.2.1 Services; Part 17：Specific conditions for wideband data and

(2002-08) HIPERLAN equipment

■ EN 50371:2002 Generic standard to demonstrate the compliance of low power

Electronic and electrical apparatus with the basic restrictions related

to human exposure to electromagnetic field (10MHz – 300GHz)

-General public

■ EN 60950-1:2001/ Safety for information technology equipment including electrical

A11:2004 Business equipment

■ CE marking

Manufacturer/Importer

Signature： ______________

Name ： Albert Yeh____

Position/ Title : Vice President

Date： 2007/5/29_____

English

802.11 a/b/g Wireless AP

WLA

00AP

Note on the FCC standard

This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interferences

when the equipment is operating in a commercial area. This equipment

generates, uses and may radiate radio frequency energy, and if not installed

in accordance with the user guide, may cause interference in the

transmission of radio communications. If operating in a residential area, it is

probable this equipment will cause harmful interference, in which case the

user will be required to try to correct this interference using his own means.

Note on CE Marking

This is a Class B product. In a residential area this product may cause radio

interference, in which case the user can be required to take the appropriate

measures. OvisLink Corp. hereby declares that WLA-5200AP meets the

basic requisites of directive 99/05/CE, and is therefore liable for the accuracy

of these data: OvisLink Corp.

5F, No.6 Lane 130,

Min-Chuan Rd, Hsin-Tien City,

Taipei, Taiwan

TEL: +886-2-2218-6888

Warranties

This product has undergone various quality controls to ensure proper

operation.

This product is covered by a two-year warranty for countries inside European

Union. For other countries, the warranty period is one year only. In the

event of any manufacturing fault or breakdown, it will be repaired by OvisLink

Corp. Please contact your supplier for details on the procedure to follow.

This warranty shall not be applicable in the event of damage caused by

improper use of the product, accidents, faulty handling or manipulation nor

any future incompatibility with third party products.

English

802.11 a/b/g Wireless AP

WLA

00AP

LED Status

Meaning Solid Flashing

Power Turns solid green when power

is ON N/A.

LAN1/LAN2 LAN Connection is detected. Receiving/

Sending data

Wireless Wireless Connection is made Receiving/

Sending data

Important Information

English



Support of 7 wireless function modes :

AP, Client, Bridge, WDS Repeater, Universal Repeater, WISP (Client

Router), and WISP + Universal Repeater



All modes (AP,Client,Repeater,WISP) default IP is 192.168.1.254



The Default mode is set to AP mode



The default Subnet Mask is 255.255.255.0



The default user name , password , SSID is set to “airlive”



The DHCP server default is on in WISP mode, other mode is set to off



The Wireless mode default is 802.11a mode running in 5 Ghz.



Upon clicking each Wireless mode button to change each Wireless

mode, system will reboot.

LED Indicators

Ports and Connectors

zReset: Press 10 seconds to

restore settings to factory default

zLAN1/LAN2: Connect your PC,

Switch, or Router here.

zPower: Connect the included

Power adapter here.

zAntenna: Install Antenna Here

English

802.11 a/b/g Wireless AP

WLA

00AP

Installation Steps

1. Please install your network cards first before the AP

2. Screw-in the antenna (clockwise) into the Antenna connector

3. Connect the power and LAN cable to the back

4. Use your wireless card to do a site survey, the default SSID is airlive

5. If you need to change AP’s configuration, please follow the procedure

below:

The Client mode’s default IP address is 192.168.1.254 Please

make sure your computer IP is in the same subnet as the AP (i.e.

192.168.1.x)

Open the web browser and enter 192.168.1.254

Enter the default user name airlive and password “airlive”

English

Wireless mode setting

This page includes all primary and major parameters for wireless mode

setting. Any parameter change will cause the device to reboot for the new

settings to take effect.

Wireless Modes: AP, Client, Bridge, WDS Repeater, Universal

Repeater, WISP (Client Router), and WISP +

Universal Repeater

The default is set to AP mode. You can select to change it to other modes.

Network Type: When in Client mode, you can select between Ad-Hoc

andInfrastructure

Repeater Type: When in Repeater mode, you can select between

WDS Repeater and Universal Repeater

WISP Type: When in WISP mode, you can setup WISP(Client Router)

English

802.11 a/b/g Wireless AP

WLA

00AP

Client, Bridge mode setup

Bridge Mode

Device B:

Mode: Bridge

Device A:

Mode: Bridge

Please make sure both A and B are set to the same channel

Client Mode

Device B:

WISP Outdoor AP

Network Type: Infrastructure

Device A:

Mode: Client

Please make sure both A and B are set to the same ESSID and channel

English

802.11 a/b/g Wireless AP

WLA

00AP

Device A:

Mode: WDS Repeater

Mac Address: Device B’s AP

Mac Address

WDS Repeater mode setup

Device B:

WDS Wireless AP/ Router

Mac Address: Device A’s AP Mac

Address

WDS Repeater Mode

1. Please make sure both A and B are set to the same channel number

2. Add other’s AP MAC Address(BSSID) that the Repeater want to connect

(Please make sure remote wireless AP/Router support WDS function)

3. Setup Wireless security function (Repeater->Security->Setup)

between WDS repeater and Wireless Client use same authentication

and encryption for wirless LAN connection. For details, please refer the

user’s manual

English

802.11 a/b/g Wireless AP

WLA

00AP

Universal Repeater Mode

Device B:

Wireless Router

Universal Repeater doesn’t require the remote device to have WDS function

Universal Repeater setup

Device A:

Mode: Universal Repeater

1. Please make sure both A and B are set to the same channel number

2. type the other AP/Router’s SSID in the “SSID of Extended Interface”

field that the repeater want to connect.

Note: the device SSID and the SSID of extended interface can be the same

or different. When you are using the universal repeater mode,

please make sure the remote AP/Router WDS function is turned off..

WISP Mode (Client Router)

Device B: WISP outdoor AP

Device A:

Mode: WISP (Client Router)

WISP mode setup

English

802.11 a/b/g Wireless AP

WLA

00AP

1. please click the “Site Survey” buttion to search and connect the WISP

Outdoor AP device

2. in WISP mode,please click the WAN port setup button for WAN

port configuration,choose the WAN Access Type and type some

Information in other filed. For details,please refer the user’s manual.

English

802.11 a/b/g Wireless AP

WLA

00AP

WISP+Universal Re

eater Mode

Device B:

WISP Outdoor AP

Device A:

Mode: WISP+Universal

Please enter “Device B” SSID in the “SSID” field for the WISP connection, and enter

“Device A” SSID in the “SSID of Extended Interface” field for the PC side connection.

Select 802.11a, b, or g mode

The AP is default to 802.11a mode, running in 5Ghz

spectrum. If you want to run it in 802.11b/g mode, you

need to change the settings. The AP can not run in both

802.11a and 802.11g mode simultaneously.

1. Open your web browser and enter the AP’s IP address.

2. Select Mode, and choose which wireless mode you want

3. for example, the default mode is AP mode and default band is 11a

(outdoor), you can click the setup button and choose the 11b,

11g,11a (indoor), or 11g+b mixed to change the 2.4Ghz or 5Ghz

band.

4. Click on Apply chnages to finish the setting

English

In this mode,WLA-5200AP behaves virtually the same as in WISP mode, but

the AP can also send wireless signal to the Wireless LAN side.

The output-power is divided between 2 wireless sides, and proper antenna

installation can significantly improve the performance.

Otros manuales para WLA-5200AP

Tabla de contenidos

Idiomas:

Otros manuales de Punto de acceso inalámbrico de AirLive

AirLive

AirLive WL-5450AP Manual de usuario

AirLive

AirLive WL-5470POE Manual de usuario

AirLive

AirLive N.TOP Manual de usuario

AirLive

AirLive wl-5460apv2 Manual de usuario

AirLive

AirLive WH-5000A Manual de usuario

AirLive

AirLive WLA-9000AP Manual de usuario

AirLive

AirLive AirMax5X II Manual de usuario

AirLive

AirLive AirMax5N Manual de usuario

AirLive

AirLive TOP-12AC Manual de instalación y operación

AirLive

AirLive WH-9000MESH Manual de usuario

AirLive

AirLive AirMax5N/ESD Manual de usuario

AirLive

AirLive WHA-5500CPE Manual de usuario

AirLive

AirLive N.MINI Manual de usuario

AirLive

AirLive WT-2000AP Manual de usuario

AirLive

AirLive AP60-EU Manual de usuario

AirLive

AirLive WLA-5200AP Manual de usuario

AirLive

AirLive N.Plug Manual de usuario

AirLive

AirLive N.Plug Manual de usuario

AirLive

AirLive WIAS-1200G Manual de usuario

AirLive

AirLive AC-1200R Manual de usuario

AirLive

AirLive WH-5400CPE Manual de usuario

AirLive

AirLive AirLive WMU-6500FS Manual de usuario

AirLive

AirLive WH-9100MESH Manual de usuario

AirLive

AirLive WH-9200AP Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario