Agilent Technologies 81250 Instrucciones de funcionamiento

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

Agilent 81250 Parallel Bit Error Ratio Tester

System Programming

Guide and

SCPI Reference

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006

Important Notice

Manual Part Number

5988-4886EN

Revision

Revision 5.5, December 2003

Printed in Germany

Agilent Technologies

Herrenberger Straße 130

D-71034 Böblingen

Germany

Authors: t3 medien GmbH

Warranty

The material contained in this document is

provided "as is," and is subject to being changed,

without notice, in future editions. Further, to the

maximum extent permitted by applicable law,

Agilent disclaims all warranties, either express or

implied, with regard to this manual and any

information contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a particular

purpose. Agilent shall not be liable for errors or

for incidental or consequential damages in

connection with the furnishing, use, or

performance of this document or of any

information contained herein. Should Agilent and

the user have a separate written agreement with

warranty terms covering the material in this

document that conflict with these terms, the

warranty terms in the separate agreement shall

control.

Technology Licenses

The hardware and/or software described in this

document are furnished under a license and may

be used or copied only in accordance with the

terms of such license.

Restricted Rights Legend

If software is for use in the performance of a U.S.

Government prime contract or subcontract,

Software is delivered and licensed as

"Commercial computer software" as defined in

DFAR 252.227-7014 (June 1995), or as a

"commercial item" as defined in FAR 2.101(a) or

as "Restricted computer software" as defined in

FAR 52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is subject to

Agilent Technologies' standard commercial

license terms, and non-DOD Departments and

Agencies of the U.S. Government will receive no

greater than Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Government

users will receive no greater than Limited Rights

as defined in FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It calls

attention to an operating procedure, practice, or

the like that, if not correctly performed or adhered

to, could result in damage to the product or loss

of important data. Do not proceed beyond a

CAUTION notice until the indicated conditions

are fully understood and met.

WARNING

A WARNING notice denotes a hazard. It calls

attention to an operating procedure, practice, or

the like that, if not correctly performed or adhered

to, could result in personal injury or death. Do not

proceed beyond a WARNING notice until the

indicated conditions are fully understood and

met.

Trademarks

Windows NT ® and MS Windows ® are U.S.

registered trademarks of Microsoft Corporation.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006 3

Contents

Programming Interfaces 19

Programming Models 20

Agilent 81250 String Interface Library 22

Error Handling 23

Connect_HP81200 23

Call_HP81200 24

GetErrStr_HP81200 25

Disconnect_HP81200 25

Example Implementations 26

Command Line Interface 28

Overview of the SCPI Command Structure 29

Command Syntax 30

Hierarchical Structure 30

Conventions Used in the Command Reference 30

Instrument Commands and Queries Syntax 31

Linking Commands 31

The Command Tree 32

DVT Subsystem and Virtual Instruments 33

Multiple Parameter Access 34

Example Programs 37

Typical SCPI Programming Sequence 38

Example C++ Program 40

SCPI Commands Overview 43

Generic Administration Commands 44

Virtual Instruments Administration Commands 44

Mass Memory Commands 45

Segment Editing Commands 46

Global Commands 48

Clock Reference Input Commands 49

External Input Commands 50

Trigger Output Commands 50

Port Administration Commands 51

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

4Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006

Terminal Administration Commands 52

Connector Administration Commands 52

Clockgroup Administration Commands 53

Sequence Commands 53

Synchronization Commands 54

Analyzer Commands 55

Level Parameter Commands 55

Amplitude/Offset Correction Factor Commands 56

Timing Parameter Commands 57

MUX Parameter Commands 58

DeMUX Parameter Commands 59

DeMUX Rewiring Commands 59

Delay Control Parameter Commands 60

Input Parameter Commands 60

Optical Input Commands 62

Output Parameter Commands 63

Optical Output Commands 64

Clock Trigger Output Commands 65

Auxiliary Out Commands 65

Performance Parameter Commands 66

Format Parameter Commands 66

Commands in the DVT Subsystem 67

Example: Use of :DVT Subsystem Commands 68

Top-Level Com ma nds 69

:DVT:IDN? 69

:SYSTem Subsystem 70

:DVT:SYSTem:ERRor? 70

:INSTrument Subsystem 71

:DVT:INSTrument:LIST? 71

:DVT:INSTrument:RESource:LIST? 71

:INSTrument:HANDle Subsystem 72

:DVT:INSTrument:HANDle:CREate? 72

:DVT:INSTrument:HANDle:LIST? 73

:DVT:INSTrument:HANDle:DESTroy 73

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006 5

:MMEMory Subsystem 74

:DVT:MMEMory:SETTing:EXPort? 74

:DVT:MMEMory:SETTing:IMPort 75

Commands in DSR Application Subsystems 77

Administration Commands 78

:<Handle>:IDN? 78

:<Handle>:OPC? 78

:SYSTem Subsystem 79

:<Handle>:SYSTem:ERRor? 79

:<Handle>:SYSTem:CINFormation? 80

:<Handle>:SYSTem:TEST:MODule 81

:<Handle>:SYSTem:TEST:GLOBal 82

:<Handle>:MODule:SREVisions 82

:<Handle>:SYSTem:MQUeue[:READ]? 83

:<Handle>:SYSTem:MQUeue:LENGth? 83

:<Handle>:SYSTem:PON[:STATus] 83

:SYSTem:CLIent Subsystem 84

:<Handle>:SYSTem:CLIent[:HANDle]? 84

:<Handle>:SYSTem:CLIent:LOCK 84

:<Handle>:SYSTem:CLIent:BLOCk 85

:<Handle>:SYSTem:CLIent:UNLock 85

:CONFiguration Subsystem 86

:<Handle>:CONFiguration:CGRoups(*)? 86

:<Handle>:CONFiguration:CGRoups(*):MODules(*)? 86

:<Handle>:CONFiguration:CGRoups(*):MODules(*):

CONNectors(*)? 87

:<Handle>:CONFiguration:CGRoups(*):MODules(*):

CONNectors(*):TYPE? 87

:<Handle>:CONFiguration:STYPes? 87

:<Handle>:CONFiguration:PROFile[:VALue] 88

:<Handle>:CONFiguration:PROFile[:VALue]? 88

:<Handle>:CONFiguration:PROFile:REMove 88

:<Handle>:CONFiguration:PROFile:LIST? 89

:MMEMory Subsystem 90

:<Handle>:MMEMory:LIST? 90

:<Handle>:MMEMory:INFormation? 91

:<Handle>:MMEMory:SEGMent:LOAD 92

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

6Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006

:<Handle>:MMEMory:SEGMent:SAVE 93

:<Handle>:MMEMory:SEGMent:GET? 94

:<Handle>:MMEMory:SETTing:NAME? 94

:<Handle>:MMEMory:SETTing:LOAD 95

:<Handle>:MMEMory:SETTing:SAVE 95

:<Handle>:MMEMory:SETTing:NEW 96

:<Handle>:MMEMory:SETTing:DELete 96

:EDIT:SEGMent(*) Subsystem 97

:<Handle>:EDIT:SEGMent:OPEN? 98

:<Handle>:EDIT:SEGMent(*):SAVE 99

:<Handle>:EDIT:SEGMent(*):DELete 100

:<Handle>:EDIT:SEGMent(*):CREate? 100

:<Handle>:EDIT:SEGMent(*):EXISts? 101

:<Handle>:EDIT:SEGMent(*):RPATh? 102

:<Handle>:EDIT:SEGMent(*):CLOSe 103

:<Handle>:EDIT:SEGMent(*):PATTern:DATA 103

:<Handle>:EDIT:SEGMent(*):PATTern:DATA? 104

:<Handle>:EDIT:SEGMent(*):PATTern:CODing 106

:<Handle>:EDIT:SEGMent(*):PATTern:CODing? 107

:<Handle>:EDIT:SEGMent(*):PATTern:ERRor:FIRSt? 107

:<Handle>:EDIT:SEGMent(*):PATTern:ERRor:NEXT? 108

:<Handle>:EDIT:SEGMent(*):PATTern:ERRor:PREVious? 108

:<Handle>:EDIT:SEGMent(*):PATTern:FIND:FIRSt? 109

:<Handle>:EDIT:SEGMent(*):PATTern:FIND:NEXT? 111

:<Handle>:EDIT:SEGMent(*):PATTern:FIND:PREVious? 111

:<Handle>:EDIT:SEGMent(*):PATTern:LENGth? 112

:<Handle>:EDIT:SEGMent(*):PATTern:WIDTh? 112

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:COPY 113

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:PASTE 113

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:FILL 114

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:INVert 115

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:MIRRor 116

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:INSert 117

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:DELete 117

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:CONVerse 118

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:SERialize 119

:<Handle>:EDIT:SEGMent(*):PATTern:MODify:DESerialize 120

:<Handle>:EDIT:SEGMent(*):PARAmeter:LENGth? 120

:<Handle>:EDIT:SEGMent(*):PARAmeter:LIST? 121

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006 7

:<Handle>:EDIT:SEGMent(*):PARAmeter[:VALue]? 121

:<Handle>:EDIT:SEGMent(*):PARAmeter[:VALue] 122

:<Handle>:EDIT:SEGMent(*):PARAmeter:REMove 122

:<Handle>:EDIT:SEGMent(*):TYPE 122

:<Handle>:EDIT:SEGMent(*):TYPE? 123

[:CGRoup(*)] Subsystem 123

:<Handle>[:CGRoup(*)]:CINFormation? 124

[:CGRoup(*)]:MCLock Subsystem 125

:<Handle>[:CGRoup(*)]:MCLock:SOURce[:VALue] 125

:<Handle>[:CGRoup(*)]:MCLock:SOURce[:VALue]? 125

[:CGRoup(*)]:MODule(*) Subsystem 126

:<Handle>[:CGRoup(*)]:MODule(*):CINFormation? 126

:<Handle>[:CGRoup(*)]:MODule(*):TYPE? 127

:<Handle>[:CGRoup(*)]:MODule(*):SLOT? 127

:<Handle>[:CGRoup(*)]:MODule(*):FRAMe? 127

:<Handle>[:CGRoup(*)]:MODule(*):NAME? 127

:<Handle>[:CGRoup(*)]:MODule(*):CNAMes? 128

[:CGRoup(*)]:MODule(*):CONNector(*) Subsystem 129

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):

CINFormation? 129

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):TYPE? 130

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):NAME? 130

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):TNAMe? 130

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):CALibration:

CDELay 131

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):CALibration:

CDELay? 131

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):CALibration:

ZDELay 131

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):CALibration:

ZDELay? 132

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):SPECies[:

VALue]? 132

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):SPECies:

STATe 132

:<Handle>[:CGRoup(*)]:MODule(*):CONNector(*):SPECies:

STATe? 133

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

8Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006

[:CGRoup(*)][:SOURce]:TRIGger Subsystem 134

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:DELay 134

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:DELay? 134

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:MUX 135

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:MUX? 135

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:OUTPut[:STATe] 135

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:OUTPut[:STATe]? 136

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:VOLTage[:LEVel][:

IMMediate]:HIGH 136

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:VOLTage[:LEVel][:

IMMediate]:HIGH? 136

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:VOLTage[:LEVel][:

IMMediate]:LOW 137

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:VOLTage[:LEVel][:

IMMediate]:LOW? 137

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:TVOLtage 137

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:TVOLtage? 138

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:IMPedance:

EXTernal 138

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:IMPedance:

EXTernal? 138

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:MODE 139

:<Handle>[:CGRoup(*)][:SOURce]:TRIGger:MODE? 139

:SGENeral Subsystem 140

:SGENeral:INFormation Subsystem 141

:<Handle>:SGENeral:INFormation:PCLasses? 141

:SGENeral:GLOBal Subsystem 142

:<Handle>:SGENeral:GLOBal:CONNect 142

:<Handle>:SGENeral:GLOBal:CONNect? 142

:<Handle>:SGENeral:GLOBal:CALibration:PUSe PASSive 143

:<Handle>:SGENeral:GLOBal:CALibration:SELF DELay 143

:<Handle>:SGENeral:GLOBal:DOFFset 143

:<Handle>:SGENeral:GLOBal:DOFFset? 144

:<Handle>:SGENeral:GLOBal:FETCh:ERRor:ANY? 144

:<Handle>:SGENeral:GLOBal:PERiod 144

:<Handle>:SGENeral:GLOBal:PERiod? 145

:<Handle>:SGENeral:GLOBal:FREQuency 145

:<Handle>:SGENeral:GLOBal:FREQuency? 145

:<Handle>:SGENeral:GLOBal:MUX? 146

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006 9

:<Handle>:SGENeral:GLOBal:MUX 146

:<Handle>:SGENeral:GLOBal:PLL:DSTate? 149

:<Handle>:SGENeral:GLOBal:PLL:STATe? 150

:SGENeral:GLOBal:CONFigure Subsystem 151

:<Handle>:SGENeral:GLOBal:CONFigure? 151

:<Handle>:SGENeral:GLOBal:CONFigure:CAPTure 151

:<Handle>:SGENeral:GLOBal:CONFigure[:ECOunt] 152

:<Handle>:SGENeral:GLOBal:CONFigure:ECAPture 152

:<Handle>:SGENeral:GLOBal:CONFigure:CCAPture 153

:SGENeral:GLOBal:INITiate:CONTinuous Subsystem 154

:<Handle>:SGENeral:GLOBal:INITiate:CONTinuous 154

:<Handle>:SGENeral:GLOBal:INITiate:CONTinuous? 154

:SGENeral:GLOBal:SYSTem Subsystem 155

:<Handle>:SGENeral:GLOBal:SYSTem:STATe? 155

:SGENeral:GLOBal:SEQuence Subsystem 156

:<Handle>:SGENeral:GLOBal:SEQuence[:VALue] 157

:<Handle>:SGENeral:GLOBal:SEQuence[:VALue]? 161

:<Handle>:SGENeral:GLOBal:SEQuence:EVENTs 162

:<Handle>:SGENeral:GLOBal:SEQuence:EVENTs? 164

:<Handle>:SGENeral:GLOBal:SEQuence:FORCe 165

:<Handle>:SGENeral:GLOBal:SEQuence:LLEVel? 165

:<Handle>:SGENeral:GLOBal:SEQuence:PCONtrol 166

:<Handle>:SGENeral:GLOBal:SEQuence:PCONtrol? 166

:<Handle>:SGENeral:GLOBal:SEQuence:STATe? 166

:SGENeral:GLOBal:SYNChronization Subsystem 167

:<Handle>:SGENeral:GLOBal:SYNChronization:USED? 168

:<Handle>:SGENeral:GLOBal:SYNChronization:BERThreshold

168

:<Handle>:SGENeral:GLOBal:SYNChronization:BERThreshold?

169

:<Handle>:SGENeral:GLOBal:SYNChronization:SMODe 169

:<Handle>:SGENeral:GLOBal:SYNChronization:SMODe? 170

:<Handle>:SGENeral:GLOBal:SYNChronization:APSelect 170

:<Handle>:SGENeral:GLOBal:SYNChronization:APSelect? 171

:<Handle>:SGENeral:GLOBal:SYNChronization:APAlignment171

:<Handle>:SGENeral:GLOBal:SYNChronization:APAlignment?

172

:<Handle>:SGENeral:GLOBal:SYNChronization:PACCuracy 172

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Otros manuales para 81250

Tabla de contenidos

Otros manuales de Equipo de prueba de Agilent Technologies

Agilent Technologies

Agilent Technologies 16048A Manual de operación

Agilent Technologies

Agilent Technologies 85032F Manual

Agilent Technologies

Agilent Technologies Medalist x6000 Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Manual de usuario

Agilent Technologies

Agilent Technologies XX3625 Manual de usuario

Agilent Technologies

Agilent Technologies aurora Duet Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 2000 X-Series Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X Series Manual de usuario

Agilent Technologies

Agilent Technologies 85105A Option 50 Manual de instalación y operación

Agilent Technologies

Agilent Technologies U1604A Manual de usuario

Agilent Technologies

Agilent Technologies E8285A Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision MSO6012A Manual de usuario

Agilent Technologies

Agilent Technologies U1401A Manual de usuario

Agilent Technologies

Agilent Technologies 8924C Manual de servicio

Agilent Technologies

Agilent Technologies 16034E Manual de operación

Agilent Technologies

Agilent Technologies 8922M Manual de usuario

Agilent Technologies

Agilent Technologies U1602B Manual de usuario

Agilent Technologies

Agilent Technologies 3070 Series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies E2969A Manual de usuario

Agilent Technologies

Agilent Technologies Option H48 Multiport Test Set Z5623A Manual

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series Manual de usuario

Agilent Technologies

Agilent Technologies 8156A Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies U1602A Manual

Agilent Technologies

Agilent Technologies E4406A Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario

Ritmix

Ritmix RAT-701 Manual de usuario