AgfaPhoto CC2700 Manual de usuario

USER MANUAL

MANUEL D’UTILISATION

BENUTZERHANDBUCH

A használati útmutató letölthet

a követ cí l

Handleidingen in verschillende talen te downloaden op

Manuales en diferentes idiomas que se pueden descargar en

Manuali in diverse lingue scaricabili su

Manuais em diferentes idiomas para download em

. w

Manualer på olika språk nedladdningsbara på

Eri kielten käsikirjat, ladattavissa

Manualer på forskjellige språk som kan lastes ned på

www.gtcompany.fr/en/customer-support/

CC2700

1. About the product

1.1 System requirements

The videos and photos transfer must be done on a computer

with the following configuration:

• Intel ®Pentium 2.0 GHZ or higher

• Microsoft Windows XP or higher operating system

• 2 GB RAM

• 40 GB available disk memory

• Standard USB interface

• 1 GB graphics or higher

• 1024*768 pixels resolution or higher

Camcorder description

Buttons fonctions

Icon Button name

Power button

Menu button

Mode button

button

Down button

Shutter button

Record/OK button

Zoom button

Function desc tion

Turn on/off the camcorder or LED light.

Dis y the set menu of the different

modes.

Press this button to switch to the modes:

Photo

Vidéo

Playback

Setu

In yback mode, ss this button to

scroll through the to or video files.

In yback mode, ss this button to

scroll through the to or video files.

In to mode, s this button to

take tos.

In video mode, s this button to start

or st video recording.

In setting mode, ss this button to

confirm a selection.

In to / video mode, the buttonto

the left or right to zoom in or out.

In yback mode, ss this button to

reduce / magnify / move a to.

MODE

2. Start using

2.1 Inserting the memory card

The camcorder supports SD memory card up to 128 GB. It is necessary

to insert a memory card before using it to store more photos or videos.

When the battery is low or replaced, the media files stored on the

memory card would not be lost.

Please follow the instructions below to insert it properly:

1. Open the battery compartment by sliding its locking button.

2. As shown below, insert the memory card into the dedicated slot with

the side of the metallic contact facing up and then push it in until

hearing a click indicating that it has been well installed.

3. Close the battery compartment cover until you hear a click again

indicating that it is securely closed.

Warning!

Please format the memory card before using the camcorder.

Do not remove or the memory card when recording,

otherwise you could damage it or lose the files stored on it!

Some memory cards may also cause the camcorder crash or

malfunction.It is recommended to use a memory card with

C10 or higher transfer as storage medium.

Warning!

Please install the battery correctly, otherwise you may not be

able to turn on the camcorder or damage it.

Use a standard charger with ter to connect it to an outlet

with of 100V-240V/50-60HZ.

2.2 Installing the lithium battery

Install the lithium battery swith the camcorder in the battery

tment following the instructions below:

1. Othe battery c tment by sliding its locking button.

2. As shown below, insert the battery into the dedicated slot in the correct

ty direction.

3. Close the battery ctment cover until you hear a click again

indicating that it is securely closed.

2.3 Charging the lithium battery

To recharge the lithium battery of the camcorder, sy connect it to your

ter with the USB cable vided in the box (without removing the

battery). The red indicator light on the back of the camcorder will light

to indicate that the battery is being charged, and will turn off when fully

charged. You can also charge the battery by connecting the camcorder to

AC if you have an ter to which you can connect the USB cable.

2.4 Powering on / off the camcorder

Press the Power button to turn on the camcorder. To turn it off, s

ss it again for 3 seconds. If the battery is discharged, the message

"Low " will on the screen indicating that the camcorder will

automatically turn off in a few seconds.

2.5 Mode switching

Press the Mode button to switch between to, video, yback and

set modes. The selected mode will in the left corner of

the screen as an icon.

2.6 Connecting to a c ter

By connecting the camcorder to your c ter, you can either transfer

the files stored on the memory card (MSDC) or use it as a PC camera.

Plug the USB cable into the third

interface on the back of the

camcorder to connect it to your

cter.

2.6.1 PC camera mode

Connect the camcorder to your PC as above.

The screen will then dis y:

Press / Down button to choose "PC Camera" and ss OK button to

switch to PC camera mode.

2.6.2 Connecting an external mic e

To get a better audio, you can connect an external mic via the

MIC t and fix it to the hot shoe if it has an ter.

2.7 Video mode

In video mode, you can shoot video c s andstore them only on the

memory card.

Here is the signification of each icon on the screen in video

mode:

3. Scene

1. Video mode 6.Memory card indicator 11. ISO

12. Exsure

13. White balance

14. Setting menu

7.Zoom

8. Battery charge

9.Recording effect

10. Video quality

2. Video resolution

4.Indicator light

5.E recording time

2.8 Photo mode

In to mode, you can take ctures andstore them in the internal

memory of the camcorder or on the memory card.

Here is the signification of each icon on the screen in video

mode:

2.9 Zoom

The camcorder has a digital zoom function allowing you to enlarge your

shot to 18 times. Slide the Zoom button to the right (T) to zoom in, then

slide it to the left (W) to zoom out.

2.10 Using the LED s tary lighting

In low light conditions, it is better to use the LED light built into the front of

the camcorder above the lens. Press the LED button (or Power button) to

turn on the LED lighting, an icon will then on the screen to indicate

that it is well on.

1.Photo mode 7. Indicator light

18. Setting

configuration

13.S ss

14. ISO

15. Exsure

16. Photoquality

17. White balance

8. Remaining number of tos

9. Memory card indicator

10. Zoom

11. Battery charge

12. Photo shooting effect

2. Photo resolution

3. Scene

4.Anti-shake

5. Face detection

6.Smile c ture

Note: you can turn the LED lighting on and off when photo shooting

or video recording.

3. Using thecamcorder

This section s you understand how to y all the features of the

camcorder.

To record videos, first ss the Mode button to switch to video mode.

The corres icon will then in the left corner of

the screen.

1. According to the image dis yed on the screen, first st the shot

focus and then ss the Record/ OK button to start a video recording.

A red dot icon will then blink at the t of the screen indicating that video

recording is in ss.

2. To se it, ss the shutter button once and then ss it again to

resume recording. To strecording definitively, ss the Record/OK

button only once.

3. Video files are automatically saved to the memory card once their

recording is finished. It is better to set the video mode settings before

recording, the following s give ex tions about the various

settings for the video mode.

3.1 Scene

The camcorder has a mult choice of set scenes for you to t the

shooting to the environment in which you find yourself.

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down Button to select a scene from the following tions:

Auto / Night / Portrait/Landsc / Backlight / St / Party / Beach / High

Sensitivity / Cancel.

5. Finally ss the OK button to save and return to the vious menu.

3.2 Resolution

The camcorder has a mult choice of video resolution. The higher the

resolution, the s the video and the larger the document, the more

ce it occ s on the memory card.

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down buttons to select a resolution from the following

tions: 2.7K / FHD / HD / VGA / Cancel.

5. Finally ss the OK button to save and return to the vious menu.

3.3 Face beauty

This function allows you to timize images automatically and brighten

teeth whitening.

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down buttons to select from the following tions: On /

Off / Cancel.

5. Finally ss the OK button to save and return to the vious menu.

3.4 Exsure

This setting allows you to st the brightness of a video according to the

brightness of the environment in which you shoot it.

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down buttons to select an ex sure value from the

following ex sure tions: +3 / +2 / + 1 / 0 / - 1 / -2 / -3.

5. Finally ss the OK button to save and return to the vious menu.

3.5 White balance

This function allows you to st the color deviation of a video according

to the light source.

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down buttons to select from the following tions:Auto /

Daylight/Cloudy / Fluorescent / Tungsten / Cancel.

5. Finally ss the OK button to save and return to the vious menu.

3.6 ISO

This function allows you to st the video sensitivity if the shooting

brightness is low. It is recommended to set it to Automatic.

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down buttons to select from the following tions: Auto /

100/ 200/ 400/ Cancel.

5. Finally ss the OK button to save and return to the menu.

3.7 Effect

This setting allows you to give a fancy effect to a video by adding a filter.

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down buttons to select from the following effect tions:

Normal/ B & W / S/ Red/ Green/ Blue/ Sunset / Warm/ Cool /

Over E sed / IR / Binary / Vivid / Undertone/ DogEye / Aibao/ Gothic /

style / LOMO/Negative / Cancel.

5. Finally ss the OK button to save and return to the menu.

3.8 S ss

This setting allows you to st the ss of a video so that the

edges of the image are clearer and more .

1. In video mode, ss the Menu button to dis y its configuration menu.

2. Then ss the / Down buttons to select this setting.

3. Press the OK button to enter the submenu.

4. Press the / Down Buttons to select from the following s s

tions: Soft / Normal/ S .

5. Finally ss the OK button to save and return to the menu.

4. Photo shooting

This section ex s how to use the to mode of the camcorder.

To take tos, first ss the Mode button to switch to to mode. The

icon will then in the left corner of the screen.

1. According to the image dis yed on the screen, first t the shot

focus and then ss the Shutter button to take a cture. The number of

tos taken in each resolution ratio will be dis yed in the right

corner of the screen.

Otros manuales para CC2700

Tabla de contenidos

Idiomas:

Otros manuales de Cámara digital de AgfaPhoto

AgfaPhoto

AgfaPhoto Photo DC-8338i Manual de usuario

AgfaPhoto

AgfaPhoto Sensor 1030s Manual de usuario

AgfaPhoto

AgfaPhoto sensor 500-X Manual de usuario

AgfaPhoto

AgfaPhoto Optima 108 Manual de usuario

AgfaPhoto

AgfaPhoto DC-833m Manual de usuario

AgfaPhoto

AgfaPhoto Optima 145 Manual de usuario

AgfaPhoto

AgfaPhoto DC5200 Manual de usuario

AgfaPhoto

AgfaPhoto DC5200 Manual de usuario

AgfaPhoto

AgfaPhoto DC-733i Manual de usuario

AgfaPhoto

AgfaPhoto DC-630 Manual de usuario

AgfaPhoto

AgfaPhoto DC-533 Manual de usuario

AgfaPhoto

AgfaPhoto Optima 147 Manual de usuario

AgfaPhoto

AgfaPhoto OPTIMA 102 Manual de usuario

AgfaPhoto

AgfaPhoto DC-504 Manual de usuario

AgfaPhoto

AgfaPhoto DC5500 Manual de usuario

AgfaPhoto

AgfaPhoto Optima 1438m Manual de usuario

AgfaPhoto

AgfaPhoto sensor 500-D Manual de usuario

AgfaPhoto

AgfaPhoto DC-733i Manual de usuario

AgfaPhoto

AgfaPhoto DC-633xs Manual de usuario

AgfaPhoto

AgfaPhoto Realishot WP8000 Manual de usuario

AgfaPhoto

AgfaPhoto PRECISA 1430 Manual de usuario

AgfaPhoto

AgfaPhoto DC8200 Manual de usuario

AgfaPhoto

AgfaPhoto DC-1338i Manual de usuario

AgfaPhoto

AgfaPhoto DC-1033m Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario