AFG Mycook 1.8 Manual de usuario
2
- The appliance’s plug must fit into the
mains socket properly. Do not alter the
plug. Do not use plug adaptors.
- Do not use or store the appliance
outdoors.
- If any of the appliances’s casing breaks,
immediately disconnect the appliance
from the mains to prevent the possibility
of an electric shock.
- Do not use the appliance if it has fallen
on the floor, if there are visible signs of
damage or if it has a leak.
- Do not force the electrical wire. Never
use the electric wire to lift up, carry or
unplug the appliance.
-Do not allow the connection cable to
come into contact with the appliance’s
hot surfaces.
- Remove and have available the required
length of cable for working with the
appliance, preventing accident risk
situations.
- Do not touch the plug with wet hands.
Personal safety
- Take the necessary measures to avoid
starting the appliance involuntarily.
- Do not touch any of the appliance’s
moving parts while it is operating.
- Do not touch metal parts or the body
when it is operating, as it may cause
serious burns.
Use and care
- Do not use the appliance if the
accessories or consumables attached to
it are defective.
Replace them immediately.
- Do not use the appliance if the parts or
accessories are not properly fitted.
- Do not use the appliance while the
goblet is empty.
- Do not use the appliance if the on/off
English
Cooking blender
Mycook 1.8
Safety advice and cautions
- Read these instructions carefully before
switching on the appliance and keep them
for future reference. Failure to follow and
observe these instructions could lead to
an accident.
- Clean all the parts of the product that
will be in contact with food, as indicated
in the cleaning section, before use.
Use or working environment:
-This appliance heats by induction. Do
not leave metallic objects on the working
surface, such as knives, forks, spoons or
lids, as they could become hot.
- Keep children and bystanders away
when using this appliance.
- Position the appliance on a flat, stable
surface, which can withstand high
temperatures, away from other sources of
heat and the splashing of water.
Electrical safety
- Do not use the appliance if the cable or
plug is damaged.
- Ensure that the voltage indicated on the
nameplate matches the mains voltage
before plugging in the appliance.
- Connect the appliance to a base with
an earthed socket rated at 16 amps.
3
Image 1
Image 2
switch does not work.
- Do not move the appliance while in
use.
- Do not force the appliance’s work
capacity.
- Respect the MAXIMUM and MINIMUM
levels.
- After its use, disconnect the appliance;
do not trust the container’s detector
- Unplug the appliance from the mains
when not in use and before undertaking
any cleaning task.
- This appliance is for household use
only, not professional or industrial use.
- This appliance is intended for adult use.
Ensure that this product is not used by
the disabled, children or people unused
to its handling.
- This appliance should be stored out of
reach of children and/or the disabled.
- This appliance is not a toy. Children
should be supervised to ensure that they
do not play with the appliance.
- Do not put the appliance away if it is
still hot.
- Make sure that the fan grill on the
appliance is not blocked by dust, dirt or
other foreign objects.
- Keep the appliance in good condition.
Check that the moving parts are not
misaligned or jammed and make sure
there are no broken parts or anomalies
that may prevent the appliance from
operating correctly.
- Keep the base of the pitcher and the
pitcher’s temperature sensor clean so
that it operates correctly
(Images 1 and 2).
- Make periodical checks of the condition
of the lid joint.
- Check that the lid is closed properly
before starting the appliance.
- Do not remove the lid while the liquid
in the container is boiling.
- Never leave the appliance unattended
while in use.
- Pay special attention when assembling
and removing the accessories, as the
blades are sharp. Be careful and avoid
direct contact with the blades’ cutting
edges.
- Any misuse or failure to follow the
instructions for use renders the guarantee
and the manufacturer’s liability null and
void.
4
Description, accessories and
documentation (Images 3 and 4)
Accessories
A Central unit.
B Measuring cup.
C Pitcher lid.
D Joint with the lid.
E Pitcher.
F Blades.
G Blades attachment.
H Pitcher attachment support with
attachment clamp.
I Blending blades.
J Spatula with removable handle.
Documentation
- Cooking techniques guide.
- Instruction manual.
- Guarantee.
Image 3
Image 5
Image 6
Image 4
To save space, the appliance is packed
with the pitcher placed in a non-operating
position.
To take the pitcher out of the central unit:
Take it by the handle, turn it clockwise to
the limit and lift up.
(Picture 5).
Accessory description
Measuring cup (Image 6)
The measuring cup is used to:
1. To measure the amount of the different
ingredients. It is marked with a measuring
scale. Its maximum capacity is 100ml.
2. To avoid splashing.
3. To avoid heat loss during cooking.
(Image 7)
5
Liquids can be added to the pitcher when
the measuring cup is positioned onto the
lid
Pitcher lid (Image 8)
Important. Never use the lid with the
correct join attached.
(Images 9 and 10)
Image 9
Image 10
Image 7
Image 8
The lid is for closing the pitcher and
activating the safety sensors.
There is a groove at the front, which fits
together with the pouring spout, and a
perforated tab at the back, which fits
together with the groove on the handle.
It also has a hole in the central part
through which the food is added;
introduce the spatula to stir it and attach
the measuring glass.
It incorporates a silicon seal, which
prevents liquids from seeping out between
the pitcher and the lid.
To set up the silicon join, ensure that the
thick side of the join is in contact with
the lid.
Lid
This thick side of the join should be
fitted in contact with the lid.
IMPORTANT: NEVER OPEN THE
PITCHER LID WHEN THE APPLIANCE
IS OPERATING, AS THERE IS A RISK
OF OVERFLOWING AND/OR BURNS.
BEFORE OPENING THE LID OF THE
PITCHER, SWITCH OFF MYCOOK AND
WAIT A FEW SECONDS FOR THE BLADES
TO STOP TURNING COMPLETELY.
6
The pitcher (Image 11)
To fit the lid:
Fit the back tab into the handle groove
(Image 15), lower the front part (Image
16) and push the lid in the direction of
the arrow (Image 17a) until you hear a
click, which will indicate that it has been
attached correctly.
Image 11
Image 12
Image 13
The pitcher has a maximum capacity of
2 litres. On the inside it has a measure
scale, which indicates 1 litre, 1.5 litres
and 2 litres (Images 11 and 12).
To remove the lid:
Slide the handle control downwards and,
when the lid has become detached, take
it out by pulling it (Images 13 and 14).
Image 14
Image 15
Image 16
Image 17a
You can also proceed by
(Image 17b)
7
To attach the pitcher:
Hold the pitcher by the handle and place
it onto the central unit, making sure the
arrows of the pitcher base and central unit
are lined up correctly. Turn the pitcher
in an anti-clockwise direction until the
arrow of the pitcher base coincides with
the lock of the central unit (Image 18).
Image 17b
Image 18
Image 19
To detach the pitcher:
Hold the pitcher by its handle and turn in an anti-
clockwise direction up to the limit (both arrows
coinciding) and lift the pitcher (Image 19).
Important: For safety reasons, the pitcher
cannot be covered or uncovered when it
is attached to the central unit. The arrow
of the pitcher base coincides with the
lock of the central unit. (Image 18)
Do not use force. A safety element might
be broken.
To cover or uncover the pitcher it must be
detached from the central unit turning it
clockwise until it comes off. (Make sure
that the arrow on the side of the pitcher
coincides with the arrow on the central
unit (Image 19).
Do not activate the heating function with
the pitcher empty.
Pitcher support with blade-fixing flange
(Image 20)
Image 20
Image 21
The pitcher support is for:
1. Fixing the blades to the pitcher.
2. Fixing the pitcher to the central unit.
3. Supporting the pitcher when it is hot
on all types of surface, without causing
burns. (Image 21)
8
Blades (Image 22)
To position the blades inside the
pitcher:
1. Place the blades inside the fitting of
the pitcher, taking care not to cut yourself
(Image 25).
2. Turn the pitcher around, keeping hold
of the blades in its fitting (Image 26).
Image 22
Image 23
Image 24
The blades have two lateral pivots in their
support which are for centering them and
fixing them correctly to the pitcher.
To remove the blades from the pitcher:
1. Move the blade-fixing flange 180º to
the open position and pull the pitcher
support away, as indicated by the arrows
(Images 23 and 24).
2. Remove the blades carefully to avoid
cuts or other injuries (Image 25)
Image 25
Image 26
Image 27
3. Fit the pitcher support (with the fixed
blade flange in the open position) onto
the blade and the three pivots at the base
if the pitcher (Image 27).
4. Turn the blade-fixing flange 180º to
the closed position, ensuring that it is at
its limit (Image 28)
9
Important. The blades must always have
the joint correctly positioned. Take special
care when handling the blades as they are
very sharp. Never submerge the blades in
water or wash them in a dishwasher, as
the internal mechanism could become
damaged if water got inside.
Spatula (Image 29)
To detach the spatula handle:
Hold it with one hand and press on the
safety ring with your thumb
(Image 30b).
Image 28 Image 30a
Image 30b
Image 30c
Image 29
The spatula is for mixing ingredients,
preventing them from sticking to the
walls of the pitcher and emptying the
contents of the pitcher.
It is made up of two main pieces:
El head and the handle
The head, which has a safety ring
preventing access to the blades and, at
the end, a detachable case made of a
soft rubber material so that the pitcher
will not be scratched. (Image 30a)
To attach the spatula:
Fit both parts together and press.
(Image 30c)
10
Important: Never introduce the spatula
into the central hole of the lid, if working
with the blending blade fixed to the
blades. (Image 31)
The blending blade is used for:
1. For whipping cream, custards, egg
whites...
2. For mixing ingredients without blending
them.
3. To avoid ingredients sticking to the
walls of the jar when working with hot
substances.
To attach the blending blade:
Attach it in a single position over the
blades and pressing softly downwards
until you hear a click, which indicates
that it is properly anchored. (Image 34)
Image 33
Image 31
Image 32
Attention. Never use utensils other than
the spatula. It can be dangerous. (Image
32)
Mixing accessory (Image 33)
Image 34
Image 35
To detach the blending blade:
Pull upwards until it becomes detached.
(Image 35)
Important: Never use the mixing blade
at speeds higher than speed 5. Never
introduce the spatula into the central
hole of the lid, if working with the mixing
accessory fixed to the blades.
(Image 31)
11
IMPORTANT: WHEN COOKING
WITH HEAT OR STEAMING, HIGH
TEMPERATURES ARE REACHED. BE
CAREFUL WHEN HANDLING THE
APPLIANCE AND ITS ACCESSORIES,
ESPECIALLY THE METALLIC PARTS,
AS THERE IS A RISK OF SUFFERING
BURNS
Instructions for use
Central unit control panel (Image 36)
A Digital screen
B Time selector control
C Light indicator for activated
kneading function
D Kneading/mixing button
E Turbo speed button
F Lit temperature indicators
G Temperature selector control
H Speed light indicators
I Speed selector control
Central Unit (Image 37)
Image 36
Image 37
J Air vents
K Pitcher presence sensors
L Dragging blades
M Electrical connection cable
N On/Off switch
0 Pitcher temperature sensor
Position the appliance on a flat, stable
surface, which can withstand high
temperatures, away from other sources of
heat and the splashing of water.
Do not cover or obstruct the air vent
situated at the back of the appliance.
- Take out the length of cable required
from the cable housing. (Image 38).
Tabla de contenidos
Idiomas:
