Aewin AW-F703 Manual de usuario
Pentium 4 Full-Size CPU Card
With VGA, LAN, TV-out , DVI Interface &Audio
PCI/ISA Bus, PICMG Compliant
User’s Manual
Version 1.1
i
© Copyright 2002.All Rights Reserved
Manual edition 1.0, Jan.2003
This document contains proprietary information protected by copyright. All rights
are reserved, no part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without prior written permission of the
manufacturer.
The content of this manual is intended to be accurate and reliable, the original
manufacturer assumes no responsibility for any inaccuracies that may be contained in
this manual. The original manufacturer reserves the right to make improvements to
the products described in this manual at any time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International
Business Machine Corporation
Intel and Pentium 4 are registered trademarks of Intel Corporation
Award is a trademark of Award Software International, Inc
ATI is a trademark of ATI Technologies Inc
Microsoft, Windows, Windows NT and MS-DOS are ether trademarks or registered
trademarks of Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and
may be trademarks and/or registered trademarks of their respective companies.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this manual, the
manufacturer and distributor assume no liability resulting from errors or omissions in
this manual, or from the use of the information contained herein.
ii
Table of Contents
Chapter 1. General Information
1.1 Introduction---------------------------------------------------------------------------------1
1.2 Specification---------------------------------------------------------------------------------1
1.3AW-F703 Package--------------------------------------------------------------------------2
1.4 Board Layout--------------------------------------------------------------------------------3
1.5 Board Dimension---------------------------------------------------------------------------4
Chapter 2. Connectors Location and Configuration
2.1 Connectors/Jumpers Location and Define--------------------------------------------5
2.2 Installing CPU------------------------------------------------------------------------------6
2.3 Installing System Memory----------------------------------------------------------------6
2.4 Connector and Jumpers Settings------------------------------------------------------ 7
Chapter 3. BIOS Setup-----------------------------------------------------------------------18
Chapter 4. Drivers and Utilities Installation---------------------------------------------38
AppendixA. Programming the Watchdog Timer--------------------------------------44
Appendix B.AC-97 Audio Kit Optional--------------------------------------------------45
Appendix C: System Resources------------------------------------------------------------48
Appendix D: Order Information-----------------------------------------------------------51
Appendix E. Optional Cable List----------------------------------------------------------52
User’s manual
AW-F703
1
Chapter 1. General Information
1.1 Introduction
The AW-F703 is fully function of socket 478 Pentium® 4 CPU Card, which is
PCI/ISA bus and PICMG compliant. The AW-F703 with Intel® 845PE and ICH4
chipset supports Intel® Pentium® 4 processors with 533MHz system bus, with two
184-pin DDR DIMM sockets for DDR SDRAM to 2Gbytes. The AW-F703 supports
one Ethernet Interface, two USB 2.0 compliant ports. Furthermore, the AW-F703 has
high speedATI Radeon 7000 AGP 4X 32M/64M onboard; it supports 32/64MB DDR
memory, CRT display, TV-out and DVI interface optional.
The onboard features include one RS-232 and one RS-232/422/485 serial port, one
bi-directional parallel port with SPP,ECP and EPP modes supported, also with
watchdog timer and ISAhigh driving capability. In addition, theAW-F703 supports
sound interface by optional daughter card.
1.2 Specification
Specifications
General Functions
CPUSocket 478 Pentium® 4 processor with 533MHz system bus
BIOSAward® 4Mbit Flash BIOS
ChipsetIntel 845PE + ICH4
I/O ChipsetWinbond® 83627HF-AW
Memory
Onboard two 184-pin DDR DIMM sockets supports DDR333 and up to
2Gbytes
Enhanced IDE
Support up to four IDE devices. Ultra DMA 33/ 66/100 mode with data
transfer rate up to 100MB/sec.
FDD interfaceSupports 34-pin header up to two floppy disk drives
Parallel portOne bi-directional parallel port. Supports SPP/ECP/EPP
Serial portOne RS-232 and one RS-232/422/485 serial ports
IR interfaceSupport one IrDA Tx/Rx header
KB/Mouse
connector
6-pin Mini-DIN connector supports PS/2 keyboard & mouse
User’s manual
AW-F703
2
USB connectorsSupports two USB 2.0 compliant ports
BatteryLithium battery for data retention up to 10years(in normal condition)
Watchdog Timer
Can generate a system reset, or IRQ11. Support 1-256 second
selectable timeout interval
System Monitoring Built in W83627HF-AW; supports temperatures, Fan speed, and
voltages monitoring
Bus interfacePCI/ISA bus, PICMG compliant
Power management Supports ATX power supply; LAN wake up & modem ring-in functions
VGA Interface
Chipset
ATI Radeon 7000 4X AGP; Supports 32/64MB DDR memory, CRT
display. TV-out and DVI interface optional.
Ethernet Interface
Chipset
One 82559ER 100/10Base-Tx or 82540EM 1000/100/10Base-Tx Fast
Ethernet controller
Sound Interface (Optional daughter card)
Chipset AC 97 codec (ADI 1881A)
Audio interface Mic in, Line in, Speaker out and CD audio in
ISA High DriveISA High Driving capability up to 64 mA
Mechanical and Environmental
Power supply
voltage
5V (4.75V to 5.25V), +12V(11.4V to 12.6V),-12V (-11.4V to -12.6V),
5VSB (4.75V to 5.25V)
Max. power
requirements
10A @ 5 V, 10A @ +12 V, 60mA @ -12V (Max.), 1.5A@5VSB
Operating
temperature
32 to 140°F (0 to 60°C)
Weight13.3"(L) x 4.8"(W) (338mm x 122mm)
1.3 AW-F703 Package
Please make sure that the following items have been included in the
package before installation.
1. AW-F703 Socket 478 Single Board
2. Quick Installation Guide
3. Cable: Please refer to Appendix C Optional Cables
User’s manual
AW-F703
3
4. CD-ROM which contains the following folders:
(1) Manual
(2) LAN Driver
(3) Tools
(4) Chipset Driver
(5) VGA Driver
(6) Sound Driver
(7) USB 2.0 Driver
If any of these items are missing or damaged, please contact your dealer
from whom you purchased the board at once. Save the shipping
materials and carton in the event that you want to ship or store the board
in the future. After you unpack the board, inspect it to assure an intact
shipment. Do not apply power to the board if it appears to have been
damaged.
Leave the board in its original packing until you are ready to install
Precautions
Please make sure you properly ground yourself before handling the
AW-F703 board or other system components. Electrostatic discharge
can be easily damage the AW-F703 board.
1. Do not remove the anti-static packing until you are
ready to install the AW-F703 board.
2. Ground yourself before removing any system
component from it protective anti-static packaging.
To ground yourself, grasp the expansion slot
covers or other unpainted parts of the computer
chassis.
3. Handle the AW-F703 board by its edges and avoid
touching its component.
1.4Board Layout
User’s manual
AW-F703
4
1.5Board Dimension
User’s manual
AW-F703
5
Chapter 2. Connectors Location and Configuration
2.1 Connectors/Jumper Location and Define
Connector Define Connectors Define
CN1 TV-Out Connector CN11 COM2 Connector
CN2 5VSB Connector CN12 DVI Connector
CN3 Front Panel CN13 IR Connector
CN4 Main Power Connector CN14 COM1 D-Sub Connector
CN5 IDE2 Connector CN15 Internal Keyboard Connector
CN6 IDE1 Connector CN16 KB/MS Connector
CN7 P4 12V Power CN17 VGA D-Sub Connector
CN8 Floppy Connector CN18 AC-97 Connector
CN9 LPT Connector CN19 LAN1 Connector
CN10 USB Connector CN20 FAN Connector
JP1 RS232/422/485 Select CN21 FAN Connector
JP2 Watchdog Select JP3 CMOS Setting
User’s manual
AW-F703
6
2.2 Installing CPU
The AW-F703 with 478 socket supports Intel® Pentium® 4 processors, up to 533MHz
system bus.
The m478PGA form factor is a chip packaging designed for the Intel® Pentium 4
processors up to 533MHz System Bus. On the m478PGApackage, the processor’s
silicon core faced up, and is expose. This allows the core to have direct contact with
a heatsink/fan.
Locating Pin 1 on your CPU and ZIPSocket
All Pentium 4 CPUs use a small golden triangle to indicate the location of pin 1.
One the corner to the right of pin 1 is an orange dot.
2.3 Installing System Memory
The AW-F703 supports two 184-pin DDR DIMM sockets, memory up to 2Gbytes.
To insert a DDR DIMM Memory: Please align the module with the socket key and
press down until the levers at each end of the socket snap close up.
User’s manual
AW-F703
7
Note: There is only one direction for installing a module in the socket. Do not
attempt to force the module into the socket incorrectly.
To remove a DDR DIMM Memory: Press down on the levers at both end of module
until the module pops out.
2.4 Connector and Jumper Settings
CN1: TV-Out Connector
Pin Define
1 LUMINANCE OUT
2 CROMIANCE OUT
3 Ground
4 Ground
5 COMPOSITE OUT
Tabla de contenidos
Otros manuales de Computadora de placa única de Aewin
Manuales populares de Computadora de placa única de otras marcas
WIN Enterprises
WIN Enterprises PL-80910 Manual de usuario
AXIOMTEK
AXIOMTEK SBC81206 Series Manual de usuario
Embest
Embest SOM-PH8800 Manual de usuario
SeaLevel
SeaLevel SBC-R9 Manual de usuario
SMART Embedded Computing
SMART Embedded Computing ATCA-8310 Manual de usuario
WinSystems
WinSystems PPM-LX800-G Manual de usuario
GIGAIPC
GIGAIPC QBiX-PPC Series Manual de usuario
OLIMEX
OLIMEX A10S-OLinuXino-MICRO Manual de usuario
Commell
Commell FS-978 Manual de usuario
GIGAIPC
GIGAIPC QBiP-8665A/ Manual de usuario
VersaLogic
VersaLogic Python EBX-11 Manual de usuario
Micro Computer Specialists
Micro Computer Specialists IRV-3702 Manual de usuario
