AES WiFi Predator Manual de usuario
1 | P a g e
Installation Instructions
For
WiFi-Predator
2 | P a g e
Index
Section
Pages
Android Configuration
3-6
iphone Configuration
7-11
Range and range testing
12-13
Installation
14
Power Supply
14
Wiring
15
Relay Output
16
Keypad Overview
16
Basic Keypad Programming
17
Full Keypad Programming
17
Using the Keypad
18
Adding Additional Smart Phones & Devices
19-20
Using the Intercom on Android
21
Using the Intercom on iphone
22
Other options
23
Fault Finding
24
Revision changes
25
3 | P a g e
Open top screws only
Existing internet router
User phone
Android Configuration
Step 1
Using one of the homeowners’ Android
phones, search for “Predator WiFi” app
on the Google Play store. Look for the
icon shown. Then download and install to
the users phone.
Step 2
Locate the intercom on a bench or table beside the home router, along
with the user phone. Connect the antenna & power supply provided to the
intercom, red to +24v dc and black to 0v dc, and power on.
Step 3
Wait a full 60 seconds for the intercom to
fully boot up.
Step 4
Press and hold the call button for more
than 3 seconds. A loud tone will be
heard. The intercom will now be in
configuration mode for 5 minutes.
4 | P a g e
Step 5
Step 6
Enter settings on the phone, select
WiFi and scan for networks. The
phone should detect the intercom.
The network name will be BELL-
XXXXX)
Enter the following password…
123456789.
Step 7
Step 8
Now open the WiFi-Predator App on
the phone and select as shown to add
intercom.
On the next screen, select search as
shown.
5 | P a g e
Step 9
Step 10
The phone should then find the
device. Select it as shown.
On the next screen the intercom should
be showing online status. Select the
settings button.
Step 11
Step 12
Enter WiFi settings as shown.
Select option to manage wifi networks
and the intercom will now scan networks
in the area.
6 | P a g e
Step 13
Step 14
Select the network which the home
owner is normally using.
Enter the home owner’s WiFi password
and press DONE. The intercom should
now re-boot and the phone should then
re-connect to the normal wifi network.
2 mins…
Step 15
Step 16
Wait 2 minutes for the intercom to
come back online, and then open the
app. The intercom should be showing
status online.
You may now press the call button and
check that the intercom calls the phone
sucessfully.
You are now ready to range test the intercom in the location which it will be
used!
7 | P a g e
Open top screws only
Existing internet router
User phone
I-phone Configuration
Step 1
Using one of the homeowners’
iphones, search for “Predator-WiFi”
app on the Apple Store. Look for the
icon shown. Then download and
install to the users phone.
Step 2
Locate the intercom on a bench or table beside the home router, along
with the user phone. Connect the antenna & power supply provided to the
intercom, red to +24v dc and black to 0v dc, and power on.
Step 3
Wait a full 60 seconds for the
intercom to fully boot up.
Step 4
Press and hold the call button for
more than 3 seconds. The intercom
will sound a long tone, and now be in
configuration mode for 5 minutes.
8 | P a g e
Step 5
Step 6
Enter settings on the phone, select
WiFi and scan for networks. The
phone should detect the intercom.
The network name will be BELL-
XXXXX)
Enter the following password…
123456789. Now the iphone is directly
connected to the intercom.
Step 7
Step 8
Now open the WiFi-Predator App on
the phone and select as shown to add
intercom.
Press search. The phone should now
detect the intercom.
9 | P a g e
Step 9
Step 10
The intercom should now have been
detected. Select as shown.
Now the app should show the bell ID,
default username & password details.
Press DONE as shown.
Step 11
Step 12
Enter Settings as shown.
Select option to manage wifi networks
and the intercom will now scan
networks in the area.
10 | P a g e
Step 13
Step 14
Select the network which the home
owner is normally using. Note the
scan button at top if the iphone does
not automatically scan for networks.
Enter the home owner’s WiFi
password and press JOIN. The
intercom should now re-boot.
2 mins…
Step 15
Step 16
Wait 2 minutes for the intercom to
come back online, and then open the
app. The intercom should be showing
status online.
You may now press the call button
and check that the intercom calls the
phone sucessfully. Note: It may take
several minutes for the operation to
fully stabalise.
Note: Because of restrictions by Apple, your iphone will receive a notification message
first. If your screen is locked, you must swipe the notification banner, then unlock the
screen before the intercom app can begin calling the phone in full as shown…
Otros manuales para WiFi Predator
1
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de AES
AES
AES Prime 6 Series Manual de usuario
AES
AES GSM-800/AB Manual de usuario
AES
AES 603AB Manual de instrucciones
AES
AES Cellcom Prime 5AB Manual de usuario
AES
AES GSM-3AB Manual de usuario
AES
AES CellCOM Plus AB Manual de instrucciones
AES
AES 603AB Manual de usuario
AES
AES WiFi Predator Manual de usuario
AES
AES 605 Manual de instrucciones
AES
AES Prime 6E Manual de usuario
AES
AES 605A Manual de usuario
AES
AES SnapCOM Prime 4G Manual de usuario
AES
AES StylusAB Manual de instrucciones
AES
AES GSM-3AB Manual de usuario
AES
AES MultiCom 500 Manual de usuario
AES
AES 602AB Manual de usuario
AES
AES 603 SPARTAN Manual de usuario
AES
AES CellCOM Lite 4G Manual de usuario
AES
AES 603 DECT Manual de usuario
AES
AES 702/AB Manual de usuario
