AerAtron Ceiling Extension Manual de usuario

IMPORTANT - Use this Ceiling Extension Instrucon in

combinaon with the Aeratron User Manual by Inserng

aer STEP 2 of the User Manual supplied with the Fan.

Ceiling Extension Instruction

Unpack your EXTENSION KIT and examine all parts, you should have the following:

EXTENSION CANOPY

DECORATION RING

CANOPY SCREW X2

EXTENSION COVER

EXTENSION ROD

EXTENSION BRACKET

BRACKET SCREW X2

SAFETY CLIP X2

PLEASE NOTE: A small colour variaon between the Fan and the retroﬁt Extension Parts is part

of standard manufacturing tolerances and consequently will need to be accepted by the user.

STEP 2 Fit Extension Bracket and Rod

STEP 1 Remove Suspension Ball

Fit Extension Bracket to

motor Sha.

Insert Bracket Screw

Tighten two Lock Screws

Remove Suspension

Ball Screw

Push Suspension Ball down Remove suspension Bolt

and Suspension Ball from

Motor Sha

Insert Safety Clips

into Bracket Screws

Fit Extension Rod to

Extension Bracket.

Insert Bracket Screw

Tighten two Lock Screws

B C

1 4

STEP 4 Fix Canopy Screw to Hanger Bracket

STEP 3 Assemble Extension parts to Extension Rod

Suspension Bolt

Suspension Ball

Suspension Ball screw

Extension Canopy

Canopy Screws

Decorang Ring

(holes facing canopy)

Extension Cover

~2mm

(5/64”)

Fix one Canopy Screw

to Hanger Bracket.

Leave a 2mm gap to

the Hanger Bracket

Insert the Suspension Bolt.

Raise the Suspension Ball to

cover the Suspension Bolt and

ghten the Suspension Ball Screw.

STEP 6 Attach Canopy and Decoration Ring

STEP 5 Position the Motor Assembly in Hanger Bracket

Ensure that lug on Hanger Bracket

is engaged in slot in suspension Ball

Connect Mains Power Connector

to Fan Motor Extension plug.

Push Canopy up and rotate clockwise on

exisng Canopy Screw.

Insert second Canopy Screw & ghten both.

Line up large holes in Decoraon

ring with screw heads, push up and

rotate counter clockwise.

Note: Move / swivel the motor assembly sideways for easy canopy screw access.

Slide Remote Control Receiver

into Hanger Bracket in the orientaon

as shown above.

Allow the Mains cable free movement

between the Bracket and Receiver.

STEP 7 Install Receiver into Extension Bracket

IMPORTANT - Connue at STEP 5 (Connecng the Reciever) of the

User Manual supplied with the fan to complete the installaon.

Thank you. Your Aeratron team.

Ceiling Extension Edion 2021/06

For General Informaon & Warranty issues refer to the Aeratron™ User Manual available at www.aeratron.io

Otros manuales de Admirador de AerAtron

AerAtron

AerAtron FR3 Series Instrucciones de instalación y funcionamiento

AerAtron

AerAtron AE2+ Series Instrucciones de instalación y funcionamiento

AerAtron

AerAtron AE+2 Series Manual de usuario

AerAtron

AerAtron E502 Manual de usuario

AerAtron

AerAtron AE2 Manual de usuario

AerAtron

AerAtron FR3 Series Instrucciones de instalación y funcionamiento

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje