AEMC 5231 Manual de usuario

DIGITAL MULTIMETER

with Non-Contact Detection

5231

ENGLISH User Manual

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

certiﬁes that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met its published speciﬁcations.

An NIST traceable certiﬁcate may be

requested at the time of purchase, or obtained

by returning the instrument to our repair and

calibration facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer. For recalibration, please

use our calibration services. Refer to our repair

and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 2125.64

Model #: 5231

Please ﬁll in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due: _______________________

Chauvin Arnoux®, Inc.

d.b.a AEMC®Instruments

www.aemc.com

Digital Multimeter Model 5231

Table of Contents

1. INTRODUCTION............................................................................... 3

1.1 International Electrical Symbols................................................4

1.2 DenitionofMeasurementCategories .....................................4

1.3 Receiving Your Shipment..........................................................5

1.4 OrderingInformation.................................................................5

1.4.1 Accessories and Replacement Parts............................5

2. PRODUCT FEATURES ...................................................................... 6

2.1 Description................................................................................6

2.2 Control Features .......................................................................7

2.3 Display Features.......................................................................8

2.4 Button Functions.......................................................................8

2.5 Rotary Functions.......................................................................9

3. OPERATION .................................................................................. 10

3.1 Turning the Multimeter ON......................................................10

3.2 Turning the Multimeter OFF....................................................10

3.3 Activating/Deactivating Auto-OFF...........................................10

3.4 Auto and Manual Range Selection .........................................10

3.5 Non-Contact Voltage (NCV)....................................................11

3.6 Voltage Measurement.............................................................11

3.7 Resistance Measurement .......................................................12

3.8 Continuity Test ........................................................................13

3.9 Diode Test...............................................................................14

3.10 Current Measurement Using a Clamp-on Probe ....................15

4. MAINTENANCE ............................................................................. 16

4.1 Warning...................................................................................16

4.2 Battery Replacement ..............................................................16

4.3 Cleaning..................................................................................16

Digital Multimeter Model 5231

5. SPECIFICATIONS........................................................................... 17

Repair and Calibration...........................................................................19

Technical and Sales Assistance ............................................................19

Limited Warranty ...................................................................................20

Warranty Repairs...................................................................................20

Digital Multimeter Model 5231

CHAPTER 1

INTRODUCTION

Warning

This device complies with safety standard IEC-61010-1 (Ed

2–2001)forvoltagesupto1000VCATIIIor600VCATIV,atan

altitudebelow 2000m,indoors,with apollutionlevel ofnotmore

than 2.

Failure to observe the safety instructions may cause an electric

shock,re,explosion,ordestructionoftheinstrumentandofthe

installations.

• Donotusetheinstrumentinanexplosiveatmosphereorin

thepresenceofammablegasesorfumes.

• Donotusetheinstrumentonnetworksofwhichthevoltage

orcategoryexceedsthosementioned.

• Donotexceedtheratedmaximumvoltagesandcurrents

between terminals or with respect to earth/ground.

• Donotusetheinstrumentifitappearstobedamaged,

incomplete,ornotproperlyclosed.

• Beforeeachuse,checktheconditionoftheinsulationonthe

leads,housing,andaccessories.Anyelementofwhichthe

insulationisdeteriorated(evenpartially)mustbesetasidefor

repair or scrapped.

• Useleadsandaccessoriesratedforvoltagesandcategories

atleastequaltothoseoftheinstrument.

• Observetheenvironmentalconditionsofuse.

• Donotmodifytheinstrumentanddonotreplacecomponents

with “equivalents”. Repairs and adjustments must be done by

approvedqualiedpersonnel.

• Replace the battery as soon as the symbol appears

onthedisplayunit.Disconnectallleadsbeforeopeningthe

battery compartment cover.

• Use personal protective equipment when conditions require.

• Keepyourhandsawayfromunusedterminalsoftheinstrument.

• Whenhandlingprobesorcontacttips,keepyourngers

behind the guards.

Digital Multimeter Model 5231

1.1 International Electrical Symbols

Signiﬁes that the instrument is protected by double or reinforced insulation.

This symbol on the instrument indicates a WARNING that the operator must

refer to the user manual for instructions before operating the instrument. In

this manual, the symbol preceding instructions indicates that if the instructions

are not followed, bodily injury, installation/sample and/or product damage may

result.

Compliance with the Low Voltage & Electromagnetic Compatibility European

directives (73/23/CEE & 89/336/CEE)

AC – Alternating current

AC or DC – Alternating or direct current

Risk of electric shock. The voltage at the parts marked with this symbol may be

dangerous.

Important instructions to read and understand completely.

Important information to acknowledge.

Ground/Earth symbol

In conformity with WEEE 2002/96/EC

1.2 Deﬁnition of Measurement Categories

CAT I: For measurements on circuits not directly connected to the AC

supplywalloutletsuchasprotectedsecondaries,signallevel,and

limited energy circuits.

CAT II: For measurements performed on circuits directly connected to

the electrical distribution system. Examples are measurements on

household appliances or portable tools.

CAT III:

Formeasurementsperformedinthebuildinginstallationatthedistri-

butionlevelsuchasonhardwiredequipmentinxedinstallationand

circuit breakers.

CAT IV: For measurements performed at the primary electrical supply

(<1000V)suchasonprimaryovercurrentprotectiondevices,ripple

controlunits,ormeters.

Digital Multimeter Model 5231

1.3 Receiving Your Shipment

Uponreceivingyourshipment,makesurethatthecontentsareconsistent

withthepackinglist.Notifyyourdistributorofanymissingitems.Iftheequip-

mentappearstobedamaged,leaclaimimmediatelywiththecarrierand

notifyyourdistributoratonce,givingadetaileddescriptionofanydamage.

Save the damaged packing container to substantiate your claim

1.4 Ordering Information

Multimeter Model 5231......................................................Cat. #2125.64

Includes set of two 5 ft color-coded leads (red/black) with needle tip {CAT IV 1000V

15A), soft carrying case and a user manual.

1.4.1 Accessories and Replacement Parts

Case - Replacement Carrying Pouch ................................. Cat. #2125.87

Lead-ReplacementSetof2,5ftColor-Coded(Red/Black)

with needle tip {CAT IV 1000V 15A) ..................................Cat. #2152.21

Order Accessories and Replacement Parts Directly Online

Check our Storefront at www.aemc.com for availability

Digital Multimeter Model 5231

CHAPTER 2

PRODUCT FEATURES

2.1 Description

TheModel5231isaTRMSdigitalmultimeter,speciallydesignedtocom-

binethevariousfunctionsand measurements ofthe following electrical

quantities:

• Non-contactdetectionofpresenceofnetworkvoltage

(NCVfunction)

• AC voltmeter with low input impedance (voltage measurements

forelectricityandelectricalengineering)

• AC/DC voltmeter with high input impedance

(voltagemeasurementsforelectronics)

• Ohmmeter

• Continuity test with buzzer

• Diode test

• Ammeter (measurement using current clamp-on probe)

Digital Multimeter Model 5231

2.2 Control Features

AUTO

mVA

MkΩ

AC DC

HOLD

0600

100 500

200 400300

Figure 2-1

1. NCV detection sensor (see § 3.5)

2. Analog and digital display (see § 2.3)

3. Function buttons (see § 2.4)

4. Rotary switch (see § 2.5)

5. Positive (Red) input and COM (Black) input

Digital Multimeter Model 5231

2.3 Display Features

Icon Function

AC Alternating Current

DC Direct Current

AUTO

The Automatic Range symbol indicates that the

instrument will automatically adjust to the correct

measurement range when taking the measurement

HOLD Freezes the display of the measurement

mPreﬁx “mili”

VVoltage

AAmpere

MPreﬁx “Mega”

kPreﬁx “kilo”

WOhm

The Overload symbol is displayed when the signal measured exceeds

the range of the device

Low Battery

Continuity Beeper Enabled

Diode Test

Auto Power OFF function activated

2.4 Button Functions

Button Function

• Measurement type selection

NOTE: The DC mode is activated by default

• Activates/Deactivates the Auto-OFF function at start-up

(see § 3.3)

• Allows manual selection of a measurement range

(short press)

• Returns to Auto-Range mode (long press > 2s)

NOTE: Continuity and Diode modes are not Auto-ranging

• Freezes/Unfreezes the display of the measured value

(short press)

• Activates/Deactivates the display backlight

(long press > 2s)

Tabla de contenidos

Manuales populares de Multímetro de otras marcas

Agilent Technologies

Agilent Technologies 34420A Manual de usuario

Fluke

Fluke 83 Manual de usuario

Hameg

Hameg HM 8012 Manual de usuario

Mastech

Mastech MY70 Manual de usuario

Steren

Steren MUL-300 Manual de usuario

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manual de usuario

PeakTech

PeakTech 4000 Manual de uso y cuidado

YOKOGAWA

YOKOGAWA 90050B Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manual de usuario

Fluke

Fluke 8846A Manual de operación y mantenimiento

Tempo Communications

Tempo Communications MM200 Manual de usuario

Elenco Electronics

Elenco Electronics CM-1555 Manual de usuario

Mastech

Mastech MS8238C Manual de usuario

SDAR

SDAR 830A, 830B, 830D, 830C Manual de usuario

RS PRO

RS PRO RS-9519BT Manual de usuario

BGS technic

BGS technic 8890 Manual de usuario

Amprobe

Amprobe Hexagon 60 Manual de usuario