DG180-S - Wireless Video Sender System
Please read this instruction manual carefully prior to installationPa e 10
TROUBLESHOOTI G
Picture Problems
Q: What do you see on your second telev s on?
he picture is present but
poor quality
I still see a Black Screen...
WRONG AV CHAN-
NEL SELECTED
1. Switch the transmitter back
on.
2. Ensure the correct SCAR
channel is selected on your sec-
ond television. Some televisions
feature multiple AV channels for
one or more SCAR , phono and
S-Video inputs.
3. If available try another SCAR
socket on the remote television
POOR RANGE
1. he picture & sound quality is
affected by the transmitter and
receiver’s location. ry position-
ing them in different locations.
he transmitter and receiver
must be connected to a mains
extension lead that can be
moved.
2. ry the 3 other available chan-
nels ensuring that the
audio/video channel is set to the
same on both the transmitter
and receiver
3. Ensure the units are within
the usable range, normally this
would be 40m when passing
through 2 average internal
walls. hicker or stone/granite
walls may lower the usable
range of this device.
RECEIVING BLANK
SIGNAL
1. Switch the transmitter on.
2. Ensure the transmitter is con-
nected to your source device.
3. Ensure that the source equip-
ment is switched on (such as
your satellite or freeview box)
I now see a snowstorm or
blue screen...
I see black or blank screen
Switch OFF your DigiSender® TRANSMITTER
What do you now see at the second TV?
