Advantek Networks ANS-16P Manual de usuario

16 Port 10/100Mbps Ethernet

Switch

Quick Installation Guide

Model # A S-16P

FCC Warning

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to Part 15 of the FCC ules. These limitations are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

* eorient or relocate the receiving antenna.

*Increase the separation between the equipment and receiver.

*Connect the equipment into a different outlet from that the receiver is connected.

*Consult your local distributors or an experienced radio/TV technician for help.

*Shielded interface cables must be used in order to comply with emission limits

Changes or modifications to the equipment, which are not approved by the party

responsible for compliance could affect the user's authority to operate the equipment.

Company has an on-going policy of upgrading its products and it may be possible

that information in this document is not up-to-date.

Please check with your local distributors for the latest information.

No part of this document can be copied or reproduced in any form without written

consent from the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.

General Description

The device is a powerful, high-performance Fast Ethernet switch, with all 16 ports capable of 10

or 100Mbps auto-negotiation operation (Nway) which means the switch could automatically

negotiate with the connected partners on the network speed and duplex mode. It is ideal for

micro-segmenting large networks into smaller, connected subnets for improved performance,

enabling the bandwidth demanding multimedia and imaging applications. Moreover, the

10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 100Mbps network

with no pain. Compared to the shared 10Mbps or 100Mbps networks, the Ethernet Switch

delivers a dedicated 10/100Mbps connection to every attached client with no bandwidth

congestion issue.

Product Features

*Complies with 10BASE-T specifications of the IEEE802.3 standard

*Complies with 100BASE-TX specifications of the IEEE802.3u standard

*16x J-45 ports for 100Base-TX and 10Base-T connectivity

*Supports Nway protocol for speed (10/100Mbps) and duplex mode

(Half/Full) auto-detection

*Supports full and half duplex operation on all ports

*Supports back-pressure (half duplex) and flow control (IEEE802.3x)

*Wire speed packet filtering and forwarding rate

*Store-and-forward architecture filters fragment & C C error packets

*Supports extensive LED indicators for network diagnostics

*External power adapter

*Supports MDI/MDI-X auto crossover

*FCC Class B, CE

Package contents

16 port 10/100Mbps Ethernet Switch

AC power adapter

Quick installation guide

If any of the items is damaged or missing, please contact your retailer immediately.

Front panel LED indicators

After installing the switch, you can check its status from the LED indicators on the front panel

shown below.

Front View

LED Color Status Indication

POWE (PW )

G EEN ON The switch is power on

OFF The switch is power off

LINK / ACT G EEN ON A link is established

BLINKING A link is established and data is being

transmitted or received

Rear panel ports

Back Panel

Ports 1x - 16x :The switch has eight 10/100Mbps J-45 ports where you can connect computers

or network devices to the switch.

AC IN : This port connects the AC power adapter.

Power Connecting

Plug the circle end of the power adapter firmly into the power port on the switch rear panel, and

the other end into an electric service outlet, then the system is ready.

Connecting computers to the switch

The switch features auto-MDI/MDIX crossover detection function and provides plug-and-play

capability. Users can immediately use any of the features of this product simply by plugging the

network cables ( J-45) into the computers and the switch.

Uplink

All Ports can be used as an uplink port for connecting to another unit without using crossover

cable. When using the uplink port, you can extend the distance to 100m for linking another switch

or hub.

To prolong the operational life of your units

*Never stack units more than eight high if freestanding

*Do not place objects on top of any unit or stack

*Do not obstruct any vents at the sides of the case

*Use only the AC power adapter that came with the

switch to prevent damage to the unit.

Otros manuales de Enrutador de red de Advantek Networks

Advantek Networks

Advantek Networks ABR-241H Manual de usuario

Advantek Networks

Advantek Networks ANS-08P Manual de usuario

Advantek Networks

Advantek Networks ANS-05P Manual de usuario

Advantek Networks

Advantek Networks ANS-2402G Manual de usuario

Advantek Networks

Advantek Networks ANS-24RC Manual de usuario

Advantek Networks

Advantek Networks ADR-18CU Manual de usuario

Advantek Networks

Advantek Networks AWR-11N-RT Manual de usuario

Advantek Networks

Advantek Networks AWR-MIMO-54RA Manual de usuario

Advantek Networks

Advantek Networks ANS-24RC Manual de usuario

Advantek Networks

Advantek Networks AWR-654GR Manual de usuario

Advantek Networks

Advantek Networks ABR-241H Manual de usuario

Advantek Networks

Advantek Networks AWN-11N-RT Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad