Advantech EDG-4508 Manual de usuario
Preface and Table of Contents
Copyright Notice
This document is copyrighted, 2001, by Advantech Co., Ltd. All rights
are reserved. Advantech Co., Ltd., reserves the right to make improve-
ments to the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this manual
is intended to be accurate and reliable. However, Advantech Co., Ltd.
assumes no responsibility for its use, nor for any infringements upon
the rights of third parties which may result from its use.
CE Notification
The EDG-4508/4516 has passed the CE test for environmental
specifications. Test conditions for passing included the equipment
being operated within an industrial enclosure. In order to protect the
EDG-4508/4516systemfrombeingdamagedbyESD(Electrostatic
Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
Printed in Taiwan Feb.2001
EDG-4508/4516 User's Manual
A Message to the Customer...
Advantech Customer Services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in the unusual and
demanding conditions typical of industrial environments. Whether
your new Advantech equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our number one concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So
if you run into technical difficulties, we are here to help. For most
frequently asked questions you can easily find answers in your
product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone.
Please consult this manual first. If you still cannot find the answer,
gather all the information or questions that apply to your problem and,
with the product close at hand, call your dealer. Our dealers are well
trained and ready to give you the support you need to get the most
from your Advantech products. In fact, most problems reported are
minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech
engineers every business day. We are always ready to give advice on
application requirements or specific information on the installation and
operation of any of our products.
Preface and Table of Contents
Product Warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
two years from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by other than repair personnel authorized by
Advantech, or which have been subject to misuse, abuse, accident or
improper installation. Advantech assumes no liability as a conse-
quence of such events under the terms of this Warranty.
Because of Advantech’s high quality-control standards and rigorous
testing, most of our customers never need to use our repair service. If
an Advantech product ever does prove defective, it will be repaired or
replaced at no charge during the warranty period. For out-of-warranty
repairs, you will be billed according to the cost of replacement materi-
als, service time and freight. Please consult your dealer for more
details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered (e.g. type
of PC, CPU speed, Advantech products used, other hardware and
software used etc.). Note anything abnormal and list any on-screen
messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual,
product, and any helpful information readily available.
3. If your product is diagnosed as defective, you have to request an
RMA number. When requesting an RMA (Return Material Authori-
zation) number, please access ADVANTECH’s RMA website: http://
www.advantech.com.tw/rma. If the web sever is shut down, please
contact our office directly. You should fill in the “Problem Repair
Form”,describing in detail the application environment, configura-
tion, and problems encountered. Note that error descriptions such as
“does not work” and “failure” are so general that we are then
required to apply our internal standard repair process.
4. Carefully pack the defective product, a completely filled-out Repair
and Replacement Order Card and a photocopy of dated proof of
purchase (such as your sales receipt) in a shippable container. A
EDG-4508/4516 User's Manual
product returned without dated proof of purchase is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
Preface and Table of Contents
Contents
1. Overview ............................................................................. 1
Features .....................................................................................................3
Package Checklist ....................................................................................3
FrontPanelView .......................................................................................4
2. Getting Started ................................................................... 7
KnowingYourApplication .........................................................................9
Single-Host Mode...........................................................................................9
Multi-Host Mode.........................................................................................10
Custom Mode...............................................................................................12
ConnectingtheHardware........................................................................13
Locating EDG-4508/4516.............................................................................13
Connecting to the Network ..........................................................................14
Connecting the Power...................................................................................14
Connecting Asynchronous Serial Devices ....................................................15
3. IP Address Configuration................................................. 17
TelnetConsole .........................................................................................18
DHCPServer ...........................................................................................21
4. Setting Up Single-Host .................................................... 25
DriverandSoftwareInstallation .............................................................27
UsingEDG-4508/4516Manager.............................................................30
SavingYour Configuration ............................................................................31
Adding an EDG-4508/4516 -Add Server Wizard .........................................31
Deletinga Server ...........................................................................................35
Modifying COM Name Mappings ..............................................................36
Un-Mapping a Port ......................................................................................37
Configuring Server Properties.......................................................................38
Upgrading EDG-4508/4516 Firmware ........................................................40
Replacinga Server.........................................................................................41
EDG-4508/4516 User's Manual
5. Setting Up Multi-Host....................................................... 43
DriverandSoftwareInstallation .............................................................45
UsingEDG-4508/4516Manager.............................................................48
SavingYour Configuration ............................................................................49
Adding an EDG-4508/4516 -Add Server Wizard .........................................49
Deletinga Server ...........................................................................................53
Modifying COM Name Mappings ..............................................................53
Un-Mapping a Port ......................................................................................54
Upgrading NPort Server Pro Firmware ........................................................55
Configuring Server Properties.......................................................................56
AccessControl ........................................................................................59
Configuring Through View by IP ..................................................................60
Configuring Through View by Port ..............................................................63
6. Setting Up Custom............................................................ 67
DriverandSoftwareInstallation .............................................................70
UsingEDG-4508/4516Manager.............................................................73
SavingYour Configuration ............................................................................74
Adding an EDG-4508/4516 -Add Server Wizard .........................................74
Deletinga Server ...........................................................................................78
Modifying COM Name Mappings ..............................................................78
Un-Mapping a Port ......................................................................................80
Upgrading EDG-4508/4516 Firmware ........................................................80
Configuring Server Properties.......................................................................81
Server Properties-Password .........................................................................82
Server Properties-Transmission ...................................................................83
AccessControl ........................................................................................84
Configuring Through View by IP ..................................................................85
Configuring Through View by Port ..............................................................89
AddingRoutestoEDG-4508/4516 ..........................................................92
Adding Routes Through Server Properties...................................................92
Modifying Routes ........................................................................................93
Removing Routes..........................................................................................94
Examples of Internet/Intranet Routing Configurations.................................94
Preface and Table of Contents
7. Utility Programs................................................................. 97
FirmwareUtility ......................................................................................99
Toolbar Functions.......................................................................................100
EDG-4508/4516Monitor.......................................................................103
Toolbar Functions.......................................................................................103
EDG-4508/4516Diagnostic .................................................................. 111
Toolbar Functions.......................................................................................111
UninstallingtheSoftware...................................................................... 117
8. Changing Your Installation Type ....................................119
A. Troubleshooting ..............................................................121
Installationand ConfigurationTroubleshooting...................................122
LEDDescription ....................................................................................126
B. Cable Pinouts ..................................................................127
10/100BaseT Port Pinouts....................................................................128
AsynchronousPortPinouts ..................................................................128
Opt1B- RJ45 to MaleDB25RS-232 Cable Pinouts ...........................129
C. Setting Up a Windows NT/95/98 Network .....................131
EDG-4508/4516 User's Manual
Figures
Figure 1-1 8-Port EDG-4508 Front Panel .................................................... 4
Figure 1-2 16-Port EDG-4516 Front Panel .................................................4
Figure 1-3 16-Port EDG-4508/4516 Rear Panel ........................................5
Figure 1-4 8-Port EDG-4508/4516 Rear Panel...........................................5
Figure 2-1 Traditional Multi-Port Serial Communication........................... 9
Figure 2-2 Single-Host Mode using two EDG-4508/4516 ........................10
Figure 2-3 Three-Hosts sharing two EDG-4508/4516 s .......................... 11
Figure 2-4 A remote control link diagram................................................12
Figure 2-5 Rack Mount ..............................................................................14
Figure 4-1 Application with one host and two EDG-4508/4516 ..............27
Figure 4-2 EDG-4508/4516 Manager menus and toolbar functions. ......31
Figure 5-1 Application with three hosts and two EDG-4508/4516 s.......45
Figure 5-2 EDG-4508/4516 Manager and the menus. .............................49
Figure 6-1 A remote control link diagram................................................69
Figure 6-2 EDG-4508/4516 Manager and the menus ..............................74
Figure 6-3 Scheme for LAN with EDG-4508/4516 connecting to the
Internet .....................................................................................95
Figure 6-4 Scheme for EDG-4508/4516 connecting to the Intranet and
Internet......................................................................................96
1
Overview
CHAPTER
2EDG-4508/4516 User's Manual
WelcometoAdvantechEDG-4508/4516, anIndustrialSerialDeviceServer
that greatly enhances the ability of a Windows NT/95/98 host to control
multiple serial port devices over a TCP/IP based Ethernet network.
This chapter is an overview of EDG-4508/4516 and includes the follow-
ing:
❒Features
❒Package Checklist
❒FrontPanelView
❒RearPanel View
EDG-4508/4516 providesa data communication solution for connecting
Windows NT/95/98 hosts to multiple asynchronous RS-232 serial ports
througha TCP/IP network. Each model has 8 or 16asynchronous RS-232
serial port connections, and one 10/100 Mbps Ethernet connection, al-
lowing any device that supports primarily the asynchronous communi-
cations protocol to attach to a network. EDG-4508/4516 works like an
add-on multi-port serial board to the NT/95/98 server, but with one major
advantage-the TCP/IP network. Since the Windows NT/95/98 host com-
municates with the COM ports on EDG-4508/4516 over a TCP/IP net-
work, you are able to control asynchronous serial devices from virtually
anywhere in the world.
Although it connects through the virtual link of the Ethernet, the ports
on EDG-4508/4516 are recognized as real COM ports by the Windows
NT/95/98operatingsystem.EDG-4508/4516 providesthebasictransmit/
receivedatafunctions,aswellasRTS, CTS, DTR, DSR, and DCD control
signals.Moreover, the EDG-4508/4516 driver is fully compatiblewiththe
Windows NT/95/98 standard COM driver.
EDG-4508/4516 canbe used with your existing applications thatsupport
serial communication. It also comes with a utility program providing a
simple step-by-step installation procedure, and a maintenance wizard
that gives you easy access to your asynchronous devices.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Servidor de Advantech
Advantech
Advantech EKI-1360-BE Series Manual de usuario
Advantech
Advantech B+B SmartWorx ABDN-SE-IN5410 Manual de usuario
Advantech
Advantech ECU-579 Series Manual de usuario
Advantech
Advantech EKI-152X series Manual de usuario
Advantech
Advantech EKI-1528-DR Manual de usuario
Advantech
Advantech ASMB-830 Series Manual de instalación y operación
Advantech
Advantech SKY-6100 Manual de usuario
Advantech
Advantech RS-100-RT Manual de usuario
Advantech
Advantech IMC-710-A Manual de usuario
Advantech
Advantech BB-VESR90 Series Manual de usuario
Advantech
Advantech ADAM-4571L Manual de usuario
Advantech
Advantech AGS-910 Manual de usuario
Advantech
Advantech SKY-8201L Series Manual de usuario
Advantech
Advantech SKY-6200 Manual de instalación y operación
Advantech
Advantech MIC-6314 Series Manual de usuario
Advantech
Advantech EKI-1526 Manual de usuario
Advantech
Advantech EKI-1121L Manual de usuario
Advantech
Advantech SPC-520 Series Manual de usuario
Advantech
Advantech HPC-8108 Manual de usuario
Advantech
Advantech SPC-530 Manual de usuario
