Advantech PCM-4862 Manual de instalación y operación

PCM-4862 Startup Manual 1

PCM-4862 486 SBC with VGA/LCD/Ethernet/SSD

PCM-4862

486 SBC with VGA/LCD/Ethernet/SSD

Startup Manual

Packing List

SpecificationsSpecifications

Specifications

Standard SBC Functions

•CPU: 80486DX/100, DX-133

•BIOS: AWARD 128 KB Flash memory

•Chipset: VIA VT82C496G

•2nd level cache: On-board 128/512 KB (optional)

•RAM memory: 4 ~ 64 MB. Two 72-pin SIMM

sockets (accept 4/8/16 or 32 MB)

•Enhanced IDE hard disk drive interface: Supports

up to two IDE hard disks. BIOS auto-detect

•Floppy disk drive interface: Supports up to two

floppy disk drives

•Multi-mode parallel port: Configured to LPT1

LPT2, LPT3 or disabled. Supports SPP/ECP/EPP

•Serial ports: One serial RS-232 port, one serial

RS-232/422/485 port. Can be configured as COM1,

COM2, COM3, COM4 or disabled individually. Two

16550 serial UARTs

•Battery: 3.6 V @ 600 mAh lithium battery for up to

10 years of data retention

•Watchdog timer: Can generate a system reset or

IRQ15. Software enabled/disabled. Time interval is

1.6 seconds

• DMA channels: 7

• Interrupt levels: 15

• Keyboard/mouse connector: 8-pin connector

supports standard PC/AT keyboard and a PS/2

mouse

• Power management: I/O peripheral devices

support power saving and doze/standby/suspend

modes. AMP 1.1 compliant

Local-bus Flat Panel/VGA Interface

•Chipset: C&T 65545

•Display memory: 512 KB DRAM (standard), 1 MB

VRAM (optional)

•Display type: Supports CRT and flat panel (EL,

LCD and gas plasma) displays. Simultaneous

display of CRT and flat panel possible

• CRT display mode: Supports resolutions up to 800

x 600 @ 8 bpp (512 K memory) and 1024 x 768 @

8 bpp (1 MB memory)

• Panel display modes: Supports resolutions up to

800 x 600 @ 256 colors (1 MB VRAM)

Packing ListPacking List

Packing List

Before you begin installing your card, please make

sure that the following materials have been shipped:

• 1 PCM-4862 all-in-one single board computer

• 1 startup manual

• 1 CD-ROM or disk for utilities, drivers, and manual

(in PDF format)

If any of these items are missing or damaged, contact

your distributor or sales representative immediately.

Note: For detailed information on the PCM-4862,

please refer to the enclosed CD-ROM or

disk (in PDF format).

For more information on this and other Advantech

products please visit our website at:

http://www.advantech.com

http://www.advantech.com/epc

For technical support and service for please visit our

support website at:

http://support.advantech.com

This manual is for the PCM-4862.

Part No. 2006486210 1st edition

Printed in Taiwan Sep. 1999

2PCM-4862 Startup Manual

Jumpers and ConnectorsJumpers and Connectors

Jumpers and Connectors

The board has a number of jumpers that allow you to

configure your system to suit your application.

The tables below lists the function of each of the

board's jumpers and connectors:

Jumpers

Label Function

J1 System clock setting

J2 System clock setting

J3 System clock setting

J4 CPU power supply

J5 CPU type select

J6 CPU power supply

J7 CPU type select

J8 CPU type select

J9 CPU type select

J10 CPU type select

J11 CPU type select

J12 CPU type select

J13 CPU type select

J14 CMOS setup

J15 ECP/EPP DMA channel

J16 ECP/EPP DMA channel

Ethernet Controller Function

• Chipset: Realtek RTL8019AS

• Type: 16-bit Ethernet, Novell NE 2000 compatible

• Connector: 10Base-T and AUI connector on board

Solid State Disk Function

• Sockets: Three 32-pin sockets for FLASH/EPROM

• FLASH type: ATMEL 29C010/29C040A (+5 V);

AMD/Intel®28F010 (+12 V)

• Size: 360 KB / 720 KB / 1.2 MB / 1.44 MB

• Utility software: Includes software to prepare files

for EPROM

• Supports M-Systems' DiskOnChip®(DOC) 2000

PC/104 Bus Expansion

• PC/104: 104-pin connector for a 16-bit bus

• Driving capacity: Six PC/104 modules

Mechanical and Environmental

•Dimension (L x W): 203 mm x 146 mm (8" x 5.75")

•Power supply voltage: +5 V (4.75 V ~ 5.25 V)

•Power requirements: +5 V A @ 2 A (typical)

•Operating temperature: 0 ~ 60° C (32 ~ 140° F)

•Weight: 0.5 kg (1.1 lbs)

Jumpers (continued)

Label Function

J17 CPU type select

J18 CPU type select

J19 CPU type select

J20 Parallel port IRQ

J21 Buzzer enable/disable

J22 Factory reserved

J23 Watchdog timer invokes IRQ15

J24 Watchdog timer invokes system

reset

J26 Ethernet CRS LED

J27 (1,2) SSD I/O address selection

J27 (3,4) SSD I/O address selection

J27 (5,6) SSD memory address selection

J27 (7,8) SSD memory address selection

J27 (9,10) SSD drive emulated

J27 (11,12) SSD drive emulated

J28 Ethernet BNC LED

J29 SSD hardware enable/disable

J30 SSD device type and selection

J31 SSD device type and selection

J32 COM2 RS-232/422/485

Connectors

Label Function

CN1 CRT display connector

CN2 Flat panel display connector

CN3 PC/104 ISA-bus expansion

CN4 Front panel connector

CN5 PC/104 ISA-bus expansion

CN6 Peripheral power connector

(-5 V, -12 V)

CN7 Ethernet 10Base-2/10Base-5 AUI

connector

CN8 Serial port COM2 (RS-232/422/485)

CN9 Keyboard and mouse connector

CN10 Ethernet 10Base-T connector

CN11 Main power connector (+5 V, +12 V)

CN12 IDE hard drive connector

CN13 Serial port COM1 (RS-232)

CN14 Fan power connector

CN15 Floppy drive connector

CN16 Parallel port connector

J25 External battery input for CMOS data

retention

PCM-4862 Startup Manual 3

Jumper Settings

J1, J2, J3: CPU clock select

25 MHz *33 MHz 40 MHz

J1 2-3 1-2 2-3

J2 2-3 2-3 1-2

J3 1-2 2-3 1-2

J4, J6: CPU power supply select

*3.3 V 3.45 V 3.6 V 5 V

J4 1-3 1-3 1-3 3-5

2-4 2-4 2-4 4-6

J6 1-2 3-4 5-6 ---

J1 ~ J13 & J17 ~ J19: CPU type select

AMD 486DX2-66 (3 V) and AMD 486DX4-100

TI 486DX-66

AMD 486DX4-120

AMD 5x86P-75

Cyrix 486DX2-66

Cyrix 486DX2-V80GP

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

4PCM-4862 Startup Manual

Cyrix 486DX4-100

Cyrix 5x86-100

Cyrix 5x86-120

IBM 486DX4

Intel®486DX-25

Intel®486DX2-66

Intel®486DX4-100 (default)

SGS 486DX2-66

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

J13 J17 J18

J7 J8 J11 J12

J19

1 2 3

J10

PCM-4862 Startup Manual 5

J14: CMOS setup

*3.6 V battery on Clear CMOS

1-2 2-3

J15 & J16: ECP/EPP/DMA channel

*DMA1 DMA3

J15

J16

J20: Parallel port IRQ select

IRQ5 *IRQ7

J21: Buzzer enable/disable

Enabled Disabled

J23 & J24: Watchdog timer system reset/IRQ15

*System reset IRQ15

J23

J24

J27, J29 ~ J31: Solid state disk configuration

Number Function

J27 (1,2) SSD I/O address selection

J27 (3,4) SSD I/O address selection

J27 (5,6) SSD memory address selection

J27 (7,8) SSD memory address selection

J27 (9,10) SSD drive emulated

J27 (11,12) SSD drive emulated

J29 SSD hardware enable/disable

J30 SSD ROM device selection

J31 SSD memory type selection

J32: COM2 select

*RS-232 RS-422 RS-485

Locating Jumpers

Locating Connectors

12 2 3

J1, J2, J3

J11

J10

J17

J13

J26

J18

J12

J29

J28

J19

J27

J20

J14,

J15,

J16

J32J30 J31

J21,

J22,

J23,

J24

CN10

CN7

CN14 CN9 CN15 CN12CN11 CN16

CN8

CN13

CN6

CN4

CN2

CN1

CN3,5

J25

6PCM-4862 Startup Manual

Mechanical DrawingMechanical Drawing

Mechanical Drawing

Otros manuales para PCM-4862

Tabla de contenidos

Otros manuales de Placa madre de Advantech

Advantech

Advantech MIO-2261 Manual de instalación y operación

Advantech

Advantech PCI-7030 Manual de usuario

Advantech

Advantech PCA-6144V Manual de usuario

Advantech

Advantech AIMB-214 Manual de usuario

Advantech

Advantech AIMB-763 Manual de usuario

Advantech

Advantech AIMB-502 Manual de usuario

Advantech

Advantech SIMB-M21 Manual de usuario

Advantech

Advantech PCA-6752 Manual de instalación y operación

Advantech

Advantech SIMB-A01 Manual de usuario

Advantech

Advantech GMB-945GC Manual de instalación y operación

Advantech

Advantech AIMB-785 Manual de instalación y operación

Advantech

Advantech AIMB-205 Manual de usuario

Advantech

Advantech PCM-9343 Manual de usuario

Advantech

Advantech PCM-9372 Manual de usuario

Advantech

Advantech AIMB-U233 Manual de usuario

Advantech

Advantech PCA-6012 Manual de usuario

Advantech

Advantech AIMB-240 Series Manual de instalación y operación

Advantech

Advantech PCE-3028 Manual de usuario

Advantech

Advantech SOM-6868 Manual de usuario

Advantech

Advantech AIMB-556 Manual de usuario

Advantech

Advantech AIMB-708 Manual de usuario

Advantech

Advantech PCM-9590 Manual de usuario

Advantech

Advantech PCM-9370F Manual de instalación y operación

Advantech

Advantech MIC-3358 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario