Advantech PCA-6155V Manual de usuario

PCA-6155V

Full-size Pentium®PICMG

PCI/ISA-bus CPU card

with VGA

This document is copyrighted, 1998. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows®is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

SiS is a trademark of Silicon Integration Systems Corporation.

UMC is a trademark of United Microelectronics Corporation.

ITE is a trademark of Integrated Technology Express, Inc.

All other product names or trademarks are properties of their

respective owners.

Part No. 2006615500

1st Edition Printed in Taiwan July 1998

iii

Packing List

Before installing your board, ensure that the following materials have

been received:

• 1 PCA-6155V all-in-one single board computer

• 1 utility disk with IDE utility programs

• 6 utility disks with SVGA utility programs and drivers for

Windows 3.1/95/NT and OS/2

• 1 hard disk drive (IDE) interface cable (40 pin)

• 1 floppy disk drive interface cable (34 pin)

• 1 parallel port adapter (26 pin) and COM2 adapter (9 pin) kit

• 1 6-pin mini-DIN keyboard & PS/2 mouse adapter

• 1 warranty certificate

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Additional Information and Assistance

1. Visit the Advantech web sites at www.advantech.com or

www.advantech.com.tw where you can find the latest information

about the product.

2. Contact your distributor, sales representative, or Advantech's

customer service center for technical support if you need

additional assistance. Please have the following information ready:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version,

application software, etc.)

• Complete description of the problem

• Exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened

only by qualified service personnel.

14. If any of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according

to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW

20° C (-4° F) OR ABOVE 60° C (140° F). IT MAY DAMAGE THE

EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

equal to or less than 70 dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden

Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein

angefeuchtetes Tuch zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein

Kippen oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor

überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht

abgedeckt werden.

8. Beachten Sie beim AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen

kann. Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es

vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine

Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder

Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.

elektrischen Schlag auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der

elektrischen Sicherheit nur von authorisiertem Servicepersonal geöffnet

werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu tren-

nen und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend

funktioni ert oder Sie mit Hilfe dieser Anleitung keine Verbesserung

erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Contents

Chapter 1 Hardware Configuration ............................ 1

1.1 Introduction........................................................................2

1.2 Specifications ......................................................................3

Standard SBC functions .......................................................3

VGA interface ......................................................................4

SSD function ........................................................................4

Mechanical and environmental specifications.....................4

1.3 Board Layout: Dimensions................................................5

1.4 Jumpers and Connectors...................................................6

1.5 Board Layout: Jumper Locations ....................................8

1.6 Board Layout: Connector Locations................................9

1.7 Safety Precautions............................................................10

1.8 Jumper Settings................................................................10

1.8.1 CPU clock ratio selection (JP12) ..............................11

1.8.2 CPU external (bus) frequency selection (JP3) ..........12

1.8.3 CPU core voltage select (JP4)...................................13

1.8.4 Watchdog timer configuration (JP7).........................15

1.8.5 Watchdog timer action (JP7) ....................................15

1.8.6 COM2 settings for RS-232/422/485 (JP6)................15

1.8.7 DOC®2000 address setting (JP5) .............................16

1.8.8 CMOS clear selection (JP15)....................................16

1.8.9 External speaker and internal buzzer (CN3).............16

1.9 Installing DRAM (SIMMs and DIMMs) .......................17

1.9.1 Installing SIMMs ......................................................17

1.9.2 Installing DIMMs .....................................................18

vii

Chapter 2 Connecting Peripherals........................... 19

2.1 Enhanced IDE Connector (CON1, CON2) ....................21

2.2 Floppy Drive Connector (CN1).......................................22

2.3 Parallel Port Connector (CN2) .......................................22

2.4 IR Connector (CN5).........................................................23

2.5 USB Connector (CN6) .....................................................23

2.6 VGA Display Connector (CN7) ......................................23

2.7 Keyboard & PS/2 Mouse Connector (CN16).................23

2.8 Front Panel Connector (CN3 and CN4; JP1, JP2) .......24

2.9 Serial Ports (CN13: COM1; CN11: COM2 / RS-232;

CN9: COM2 / RS-422/485)..............................................24

2.9.1 RS-232 connection (COM1-CN13) ..........................25

2.9.2 RS-232/422/485 connection (COM2-CN11, CN9) ..25

Chapter 3 Award BIOS Setup ................................... 27

3.1 AWARD BIOS Setup.......................................................28

3.1.1 Entering setup ...........................................................28

3.1.2 Standard CMOS setup...............................................29

3.1.3 BIOS features setup ..................................................30

3.1.4 CHIPSET features setup ...........................................34

3.1.5 Power management setup .........................................35

3.1.6 PCI configuration setup ............................................36

3.1.7 Load BIOS defaults...................................................36

3.1.8 Load setup defaults ...................................................36

3.1.9 Integrated Peripherals ...............................................37

3.1.10 Password setting......................................................37

3.1.11 IDE HDD auto detection.........................................37

3.1.12 Save & exit setup ....................................................38

3.1.13 Exit without saving .................................................38

viii

Chapter 4 PCI SVGA Setup....................................... 39

4.1 Introduction......................................................................40

4.2 Before You Begin .............................................................40

4.3 Utility Disk ........................................................................41

4.4 Driver Installation............................................................41

4.4.1 Windows setup..........................................................42

4.4.2 DOS setup .................................................................43

4.5 Windows 95 Drivers Setup Procedure ...........................44

4.6 Windows NT Drivers Setup Procedure..........................45

Step 1..................................................................................45

Step 2..................................................................................45

Step 3..................................................................................45

4.7 OS/2 Drivers Setup Procedure........................................46

Preliminary steps................................................................46

Installing from diskette ......................................................46

Selecting monitor type .......................................................48

Selecting screen resolution / refresh rate ...........................48

Installation notes ................................................................49

Appendix A Programming the Watchdog Timer ...... 51

Programming the Watchdog Timer.........................................52

Appendix B Installing PC/104 Modules ..................... 55

B.1 Installing PC/104 modules...............................................56

Appendix C Pin Assignments ................................... 59

C.1 CRT Display Connector (CN7).......................................60

C.2 COM2 RS-232/422/485 Serial Port (CN9, CN11) ............60

C.3 External Keyboard Connector (CN10) ..........................61

C.4 COM1 RS-232 Serial Port (CN13) .................................61

C.5 Keyboard and Mouse Connnector (CN16) ....................62

C.6 IDE Hard Drive Connector (CON1, CON2) .................63

C.7 USB Connector (CN6) .....................................................64

C.8 CPU Fan Power Connector (CN15) ...............................64

C.9 Floppy Drive Connector (CN1).......................................65

C.10 Parallel Port Connector (CN2) .......................................66

C.11 HDD LED Connector (JP1) ............................................67

C.12 IR Connector (CN5).........................................................67

C.13 System I/O Ports ..............................................................68

C.14 DMA Channel Assignments ............................................69

C.15 Interrupt Assignments.....................................................70

C.16 1st MB Memory Map.......................................................70

Appendix D DOC®2000 Installation Guide................ 71

DiskOnChip®2000 Quick Installation Guide...........................72

DiskOnChip®2000 installation instructions ......................72

Additional information and assistance...............................73

Tables

Table 1-1: PCA-6155V jumpers ...................................................................................6

Table 1-2: PCA-6155V connectors ...............................................................................7

Table 1-3: CPU clock ratio selection (JP12) ...............................................................12

Table 1-4: CPU external (bus) frequency selection (JP3)...........................................12

Table 1-5: CPU voltage select (JP4) ...........................................................................13

Table 1-6: Setting jumpers according to internal speed of CPU.................................14

Table 1-7: Watchdog timer system reset/IRQ 11 select (JP7) ....................................15

Table 1-8: COM2 settings for RS-232/422/485 (JP6) ................................................15

Table 1-9: DOC2000 address setting (JP5).................................................................16

Table 1-10: CMOS clear selection (JP15)...................................................................16

Table 1-11: External speaker and internal buzzer (CN3)............................................16

Table 2-1: PCA-6155V connectors .............................................................................20

Table 2-2: Serial port connections (COM1, COM2) ..................................................25

Table 2-3: PCA-6155V serial port default settings .....................................................25

Table B-1: PCA-6155V PC/104 connectors (CN14) ..................................................58

Table C-1: PCA-6155V CRT display connector ........................................................60

Table C-2: PCA-6155V COM2 RS-232/422/485 series port .....................................60

Table C-3: PCA-6155V external keyboard connector ................................................61

Table C-4: PCA-6155V COM1 RS-232 serial port ....................................................61

Table C-5: PCA-6155V keyboard and mouse connector............................................62

Table C-6: PCA-6155V IDE hard drive connector.....................................................63

Table C-7: USB1/USB2 connector .............................................................................64

Table C-8: PCA-6155V CPU fan power connector ....................................................64

Table C-9: PCA-6155V floppy drive connector .........................................................65

Table C-10: PCA-6155V parallel port connector .......................................................66

Table C-11: PCA-6155V HDD LED connector .........................................................67

Table C-12: PCA-6155V IR connector .......................................................................67

Table C-13: System I/O ports......................................................................................68

Table C-14: DMA channel assignments .....................................................................69

Table C-15: Interrupt assignments ..............................................................................70

Table C-16: 1st MB memory map...............................................................................70

Otros manuales para PCA-6155V

Tabla de contenidos

Otros manuales de Placa madre de Advantech

Advantech

Advantech MIO-2361 Series Manual de usuario

Advantech

Advantech AIMB-253 Series Manual de usuario

Advantech

Advantech AIMB-256 Manual de usuario

Advantech

Advantech AIMB-554 Manual de usuario

Advantech

Advantech MIO-3360 Manual de instalación y operación

Advantech

Advantech SOM-6882 Manual de usuario

Advantech

Advantech PCM-4153-A2 Manual de instalación y operación

Advantech

Advantech AIMB-273 Manual de usuario

Advantech

Advantech RSB-4221 Manual de usuario

Advantech

Advantech AIMB-763 Manual de usuario

Advantech

Advantech AIMB-262 Manual de usuario

Advantech

Advantech AIMB-240 Series Manual de instalación y operación

Advantech

Advantech PCE-3028 Manual de usuario

Advantech

Advantech AIMB-210 Manual de instalación y operación

Advantech

Advantech AIMB-740 Series Manual de usuario

Advantech

Advantech MIC-3385 Manual de usuario

Advantech

Advantech AIMB-556 Manual de usuario

Advantech

Advantech PCM-9386 Manual de instalación y operación

Advantech

Advantech MIC-3369C Manual de usuario

Advantech

Advantech AIMB-567 Manual de usuario

Advantech

Advantech AIMB-764 Manual de instalación y operación

Advantech

Advantech PCA-6753F Manual de usuario

Advantech

Advantech AIMB-580 Manual de usuario

Advantech

Advantech MIO-5251 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario