Advantech DSD-5038 Series Manual de usuario
DSD-5038 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2022
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
Intel® and Pentium® are trademarks of Intel® Corporation.
Microsoft® Windows® and MS-DOS® are registered trademarks of Microsoft® Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Part Number 2006502801 Edition 2
Printed in Taiwan January 2022
iii DSD-5038 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
type of cable is available from Advantech. Please contact your local supplier for
ordering information.
Test conditions for passing also include the equipment being operated within an
industrial enclosure. In order to protect the product from damage caused by electro-
static discharge (ESD) and EMI leakage, we strongly recommend the use of CE-
compliant industrial enclosure products.
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
DSD-5038 User Manual iv
Warnings, Cautions, and Notes
Document Feedback
To assist us with improving this manual, we welcome all comments and constructive
criticism. Please send all feedback in writing to [email protected].
Warning! Warnings indicate conditions that if not observed can cause personal
injury!
Caution! Cautions are included to help prevent hardware damage and data
losses. For example,
“Batteries are at risk of exploding if incorrectly installed. Do not attempt
to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.”
Note! Notes provide additional optional information.
v DSD-5038 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If any of the following occurs, have the equipment checked by service person-
nel:
–The power cord or plug is damaged.
–Liquid has penetrated the equipment.
–The equipment has been exposed to moisture.
–The equipment is malfunctioning, or does not operate according to the user
manual.
–The equipment has been dropped and damaged.
–The equipment shows obvious signs of breakage.
15. Do not leave the equipment in an environment with a storage temperature of
below -20 °C (-4 °F) or above 60 °C (140 °F) as this may damage the compo-
nents. The equipment should be kept in a controlled environment.
16. In accordance with IEC 704-1:1982 specifications, the sound pressure level at
the operator’s position does not exceed 70 dB (A).
DISCLAIMER: These instructions are provided according to IEC 704-1 standards.
Advantech disclaims all responsibility for the accuracy of any statements contained
herein.
Caution! If the power adapter is not shipped with the unit, information regarding
the power adapter’s output rating (24 Vdc, 5 A min, or 120 W min) is pro-
vided in the user manual, enabling enable users to select an appropriate
power adapter.
DSD-5038 User Manual vi
vii DSD-5038 User Manual
Contents
Chapter 1 Overview...............................................1
1.1 Introduction ............................................................................................... 2
1.2 Features .................................................................................................... 2
1.3 Applications............................................................................................... 2
1.4 Product Photographs ................................................................................ 3
1.5 Naming Conventions................................................................................. 4
Chapter 2 System Setup.......................................5
2.1 Specifications............................................................................................ 6
2.2 Dimensions ............................................................................................... 7
Figure 2.1 DSD-5038 Series Dimensions.................................... 7
2.3 Packing List............................................................................................... 7
2.4 Power Output ............................................................................................ 7
Chapter 3 OSD Key Functions .............................9
3.1 OSD Functions........................................................................................ 10
3.1.1 Select Signal Input Source.......................................................... 10
3.1.2 Picture Settings........................................................................... 11
3.1.3 Language Settings ...................................................................... 11
3.2 RS-232 Remote Control.......................................................................... 12
3.2.1 Configuration............................................................................... 12
3.2.2 Commands.................................................................................. 12
Appendix A Troubleshooting ................................13
A.1 Introduction ............................................................................................. 14
A.2 Troubleshooting ...................................................................................... 14
DSD-5038 User Manual viii
Chapter 1
1Overview
Introduction
Features
Applications
Product Photographs
Naming Conventions
DSD-5038 User Manual 2
1.1 Introduction
Advantech’s DSD-5038 series products are industrial stretched signage display mon-
itors of an innovative size, shape, and display resolution, designed to be quickly and
easily integrated with Advantech’s embedded box computers, such as the ARK and
DS series computers.
1.2 Features
38" (16:4) 1920 x 358, high-resolution stretched display with LED backlighting
High brightness of 800 cd/m2
High contrast ratio (1:4000)
0 ~ 45 °C (32 ~ 113 °F) operating temperature
Ultra-wide viewing angle (176° / 176°)
Input signal HDMI/DVI/VGA
RS232 remote control support
Audio output
Wall mount (200 x 100 mm;7.87 x 3.93 in)
Fanless design
1.3 Applications
The DSD-5038 series can be used as public information displays and are especially
suitable for narrow or limited spaces. Below are some application examples.
Displaying Bus/Metro route maps
Station information displays (advertisements or schedules)
Signage displays in elevators
Advertisements in cafeterias and public venues
Entertainment / Gaming
Public advertisement displays
Tabla de contenidos
Otros manuales de Señalización digital de Advantech
Advantech
Advantech DS-862 Series Manual de usuario
Advantech
Advantech DSA-2100A Series Manual de usuario
Advantech
Advantech UBC-DS31 Manual de usuario
Advantech
Advantech ARK-DS306 Manual de usuario
Advantech
Advantech DS-570 Manual de usuario
Advantech
Advantech ARK-DS762 Manual de usuario
Advantech
Advantech DSA-3300 Manual de usuario
Advantech
Advantech DS-780 Manual de usuario
Advantech
Advantech DS-080 series Manual de usuario
Advantech
Advantech DS-370 Manual de usuario
