Advantech PCIE-1730H Manual de usuario

User Manual

PCIE-1730H

32-ch Isolated Digital I/O with

Digital filter PCI Express Card

PCIE-1730H User Manual ii

The documentation and the software included with this product are copyrighted 2017

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any on screen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2001173010 Edition 1

Printed in Taiwan March 2017

iii PCIE-1730H User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local supplier for

ordering information.

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

PCIE-1730H User Manual iv

Warnings, Cautions and Notes

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to: support@advan-

tech.com

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

v PCIE-1730H User Manual

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

Safety Precaution - Static Electricity

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained

herein.Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

PCIE-1730H User Manual vi

vii PCIE-1730H User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 3

1.4 Installation Guide ...................................................................................... 3

1.5 Software Overview .................................................................................... 4

1.6 Accessories.............................................................................................. 4

Chapter 2 Hardware Installation ..........................5

2.1 Installation ................................................................................................. 6

2.2 Unpacking ................................................................................................. 6

2.3 Driver Installation ...................................................................................... 7

2.4 Hardware Installation ................................................................................ 7

Figure 2.1 Device Manager ......................................................... 8

Chapter 3 Signal Connections.............................9

3.1 Overview ................................................................................................. 10

3.2 Switch and Jumper Settings.................................................................... 10

Figure 3.1 Card Connector, Jumper and Switches.................... 10

Table 3.1: Summary of Jumper Settings ................................... 10

Table 3.2: Board ID setting (SW1)............................................. 10

3.3 Signal Connections ................................................................................. 11

Figure 3.2 TTL-level DI/O Connection ....................................... 12

Figure 3.3 Open/Short Connection ............................................ 12

Figure 3.4 Isolated DI Connection ............................................. 13

Figure 3.5 Isolated Digital Output Connection ........................... 13

Appendix A Specifications ....................................15

A.1 Specifications .......................................................................................... 16

A.1.1 Isolated Digital Input ................................................................... 16

A.1.2 Isolated Digital Output................................................................. 16

A.1.3 Non-isolated Digital Input/Output ................................................ 16

A.1.4 General ....................................................................................... 17

A.1.5 Digital Filter Time ........................................................................ 17

Appendix B Block Diagram ...................................19

B.1 PCIE-1730H ............................................................................................ 20

PCIE-1730H User Manual viii

Chapter 1

1Overview

PCIE-1730H User Manual 2

1.1 Introduction

The Advantech PCIE-1730H is a 32-channel isolated digital input/output card for the

PCI Express bus.

The PCIE-1730H’s isolated digital input channels are ideal for digital input in noisy

environments or with floating potentials.

The following sections of this chapter will provide further information about features,

installation guide, together with some brief information on software and accessories

for the PCIE-1730H card.

1.2 Features

PCIE-1730H

32-ch isolated DI/O (16-ch digital input w/ Digital filter, 16-ch digital output)

32-ch TTL DI/O (16-ch digital input w/ Digital filter, 16-ch digital output)

High output driving capacity with 500 mA per channel (maximum)

High-voltage isolation on isolated I/O channels (2,500 VDC)

Interrupt handling capability for all DI and IDI channels

Two 20-pin connectors for isolated DI/O channels and two 20-pin connectors for

TTL DI/O channels

D-type connector for isolated input and output channels

High ESD protection (2,000 VDC)

High over-voltage protection (70 VDC)

Wide input range (10 ~ 30 VDC)

Board ID to identify specific card when multiple devices are installed

The Advantech PCIE-1730H offers the following main features:

Robust Protection

The PCIE-1730H digital input channels feature robust isolation protection for indus-

trial, lab and machinery automation applications. It durably withstands voltage up to

2,500 VDC, preventing your host system from any incidental harm. If connected to an

external input source with surge-protection, the PCIE-1730H can offer up to a maxi-

mum of 2,000 VDC ESD (Electrostatic Discharge) protection. Even with an input volt-

age rising up to 70 VDC, the PCIE-1730H can still manage to work properly, albeit

only for a short period of time.

Wide Input Range

The PCIE-1730H has a wide range of input voltage from 10 to 30 VDC, and is suitable

for most industrial applications with 12 VDC or 24 VDC input voltage.

Plug-and-Play Function

The PCIE-1730H is a Plug-and-Play device, which fully complies with PCI Express

Specification Rev V1.0. During card installation, there is no need to set jumpers or

DIP switches. Instead, all bus-related configurations such as base I/O address and

interrupt are automatically done by the Plug-and-Play function.

Otros manuales para PCIE-1730H

Tabla de contenidos

Otros manuales de Hardware de computadora de Advantech

Advantech

Advantech PCA-6742 Series Manual de instalación y operación

Advantech

Advantech PCE-3026 Manual de instalación y operación

Advantech

Advantech MIC-7 Series Manual de instalación y operación

Advantech

Advantech PCE-5B09-06 Manual de instalación y operación

Advantech

Advantech PCM-3362 Manual de usuario

Advantech

Advantech PCM-3718H Manual de usuario

Advantech

Advantech HPC-8000 Manual de usuario

Advantech

Advantech PCE-7132 Manual de instalación y operación

Advantech

Advantech PCL-734 Manual de usuario

Advantech

Advantech PCA-6188 Manual de usuario

Advantech

Advantech ROM-5420 Manual de usuario

Advantech

Advantech MIO-2375 Manual de instalación y operación

Advantech

Advantech PCM-26D1DB Manual de instalación y operación

Advantech

Advantech ARK-3202 Manual de usuario

Advantech

Advantech PCL-818L Manual de usuario

Advantech

Advantech PCLD-8811 Manual de instalación y operación

Advantech

Advantech MIC-3393 Manual de usuario

Advantech

Advantech SKY-MXM-A1000 Manual de usuario

Advantech

Advantech PCLD-8751 Manual de usuario

Advantech

Advantech PCA-6743 Manual de instalación y operación

Advantech

Advantech MIC-7420 Manual de instalación y operación

Advantech

Advantech MIO-5375 Manual de usuario

Advantech

Advantech ARK-1551 Manual de usuario

Advantech

Advantech EIS-D210 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario