ADVANTAGE AIR MyPlace Manual de usuario

Smart Home Systems

User Manual

V4.0

User Manual V4.0 2

MyAir User Manual

Contents

1 - INTRODUCTION 3

2 - MODE PAGE 4

3 - ZONES PAGE 6

4 - TEMPERATURE CONTROL (OPTIONAL) 7

5 - MOTION ZONE (OPTIONAL) 10

6 - CONSTANT ZONES 11

7 - FRESH AIR (OPTIONAL) 12

8 - SCENES PAGE 13

9 - SCENES EDITOR PAGE 14

10 - EVENTS PAGE 15

11 - EVENT EDITOR PAGE 16

12 - SAMPLE EVENTS SETTING 20

13 - SETUP PAGE 21

14 - OPTIONS PAGE 22

15 - TROUBLESHOOTING 23

MyAir+ User Manual 24

User Manual V4.0 3

1 - INTRODUCTION

Welcome to your new MyAir smart air conditioning system.

The information provided in this user manual will help you to get the most from

your new air conditioning system.

Upon rst power up, the system will take a few minutes to initialise.

If you walk away from your screen it will go to sleep, to wake the screen simply

double tap on a corner of the screen.

This is your home screen, press the large MyPlace button to start the MyPlace app.

Once the MyPlace app has loaded press the blue MyAir Tab to start controlling

your aircon.

User Manual V4.0 4

The Mode Screen on the MyAir tab allows you to control your Air-conditioner’s

operation.

From the Mode Screen you can perform the following actions:

• Turn the air-con unit ON or OFF;

• Set an ON or OFF Timer;

• Select the unit FAN speed;

• Set the Target Temperature; and

• Select the air-con unit mode.

The color indicates the

current aircon mode

Aircon ON Aircon OFF

Press to turn your

aircon ON or OFF.

2 - MODE PAGE

10hr 30min

Off in

press to set

Timer

low medium high

myfan

cool heat dry myautofan

ONOFF

ZonesMode Setup Help

Favourite Buttons

Types of buttons in the app

OFFON

Tips:

- Brightness can be adjusted even when the lights are off

- Flick the lights wall switch 4 times for 100% brightness

Tips:

- Add your existing hue lights by setting it up in Setup > Options page

The buttons that you use the most on each device are shown here, along with any Groups

that have been “starred” on the Groups page. Group buttons have a light grey background

colour and is shown first in the list followed by the single buttons.

Light button (dimmable)

Outdoor ONOFF

Lounge Lounge

Other Buttons

OFFON

DOWNUP

OPEN

Pool Cover OPENCLOSE Pool Cover OPEN

CLOSED

Exhaust ONOFF Exhaust ONOFF

Up/Down Button (Garage & Blinds)

Blinds Blinds

OFFON

Hue light button (dimmable)

OFFON

ON/OFF button (not dimmable)

Flood Light Flood Light

OFFON

Group button

Living

Garage

Open

Garage Door

Aircon

Closed

Press here to open or close your garage door.

Tips:

- If you have 2 or more garage doors, then the first garage door will be controlled here.

To change this, use your wall mounted touch screen to rearrange the garage door order on

the group page.

Home

One or more Aircons are On All Aircons Off

Air Air

Press to turn all of your aircons ON or OFF.

MyAir+ (two or more aircons)

Air Air

Note:

Favourite Scenes, buttons and lights are per device. This means your smartphone and

the wall mounted touch screen can have different favourties, depending on what groups and

scenes you “star”, and what buttons you use the most on each device.

You can “star” up to 4 scenes.

Favourite Scenes

Your favourite Scenes are shown here. These are

the Scenes that have been “starred” on the Scenes

page, this can be changed at any time by going to

the Scenes page.

Pressing one of your favourite scene buttons will

run that scene.

To edit a Scene go to the Scenes page on the wall

mounted touch screen. For more info, see the

Scenes screen help page.

MyWelcome

MyGoodbye

Home Groups Monitors SetupScenes

Help

Home Groups Monitors SetupScenes

Air

Garage

Kitchen

Study

Dining Lounge

Kids Room

Patio Bed 1

Living Bedrooms

Cinema

06:57 PM

MyWelcome

MyGoodbye

Cinema Cinema

Monitor is included

in the scene

Aircon

Favourite Buttons Favourite Scenes

Garage Door

User Manual V4.0 5

2 - MODE PAGE

Simple Timer

The Simple Timer can be used to turn the

aircon unit ON or OFF after a set time.

The timer can be set up to 12hours.

Pressing the Trash icon clears the timer.

NOTE: This is a once-only timer that does not repeat each day. More

advanced timers can be setup in the Scenes Screen.

Target Temperature

The Target Temperature is the temperature you

would like to achieve. Press the + or - symbols

to adjust the number.

Fan Speed

The air-con Fan speed can be set to low,

medium, high, auto or myfan.

myfan allows MyAir to automatically adjust the unit fan speed based on the

current number of open zones.

HANDY TIP: Your air-con unit is most efcient when maintaining a Target

Temperature. Ensure your Target is set to a Temperature that is comfortable for

you. Cooling or Heating a home past what is comfortable will result in higher

energy usage.

Operation Mode Selector

• cool – Cool your home in summer

• heat – Warm your home in winter

• fan – Used to recirculate air within the home, a great energy efcient

option if you just want to move some air around the home as only your

fan in the roof space will run & not the outside unit.

• dry - This can be used to reduce the humidity in your home (if supported

by air-con unit brand and model.)

• myauto - This will average all open zone and aim to mantain them at a

temperature between 20 and 24 degrees. (if this option is enabled in

options page.)

low medium high myfan

Press this button to turn your Aircon ON or OFF

Aircon On Aircon Off

Target Temperature & Mode

Fan Speed

This can be adjusted by sliding the switch to the desired speed OR touching

the desired area on the slider

Timer

Allows you to turn your Aircon ON or OFF at intervals of up to 12 hours.

For example if your Aircon is ON you can set a timer for it to turn OFF after 5

hours.

These icon will show instead of the

target temperature when a

MyComfort feature is active.

Refer to options help page for more

information.

Off in

5 hours

Timer

press to set

OFF ON OFF ON

The colour indicates the

current aircon mode

Mode

mysleep$aver is

active

mytemp is active

cool heat dry myautofan

low medium high myfan

Press this button to turn your Aircon ON or OFF

Aircon On Aircon Off

Target Temperature & Mode

Fan Speed

This can be adjusted by sliding the switch to the desired speed OR touching

the desired area on the slider

Timer

Allows you to turn your Aircon ON or OFF at intervals of up to 12 hours.

For example if your Aircon is ON you can set a timer for it to turn OFF after 5

hours.

These icon will show instead of the

target temperature when a

MyComfort feature is active.

Refer to options help page for more

information.

Off in

5 hours

Timer

press to set

OFF ON OFF ON

The colour indicates the

current aircon mode

Mode

mysleep$aver is

active

mytemp is active

cool heat dry myautofan

low medium high myfan

Press this button to turn your Aircon ON or OFF

Aircon On Aircon Off

Target Temperature & Mode

Fan Speed

This can be adjusted by sliding the switch to the desired speed OR touching

the desired area on the slider

Timer

Allows you to turn your Aircon ON or OFF at intervals of up to 12 hours.

For example if your Aircon is ON you can set a timer for it to turn OFF after 5

hours.

These icon will show instead of the

target temperature when a

MyComfort feature is active.

Refer to options help page for more

information.

Off in

5 hours

Timer

press to set

OFF ON OFF ON

The colour indicates the

current aircon mode

Mode

mysleep$aver is

active

mytemp is active

cool heat dry myautofan

low medium high myfan

Press this button to turn your Aircon ON or OFF

Aircon On Aircon Off

Target Temperature & Mode

Fan Speed

This can be adjusted by sliding the switch to the desired speed OR touching

the desired area on the slider

Timer

Allows you to turn your Aircon ON or OFF at intervals of up to 12 hours.

For example if your Aircon is ON you can set a timer for it to turn OFF after 5

hours.

These icon will show instead of the

target temperature when a

MyComfort feature is active.

Refer to options help page for more

information.

Off in

5 hours

Timer

press to set

OFF ON OFF ON

The colour indicates the

current aircon mode

Mode

mysleep$aver is

active

mytemp is active

cool heat dry myautofan

User Manual V4.0 6

3 - ZONES PAGE

Press Zones button on the menu bar to bring up the Zones Screen.

Pressing a Zone name toggles that Zone between ON and OFF. Zones are OFF

when they are in grey colour.

There are four different types of zones in MyAir depending on the option you

selected when purchasing your system.

• Airow Zone

If there is no sensor installed in a particular zone then it will be shown as an

AIRFLOW zone. In this instance, you have the ability to control the air in 5%

increments. Use the - / + buttons when a zone is turned ON, to adjust the

amount of airow going to that zone.

• Temperature Zone (Optional)

If your zone has a temperature sensor installed, MyAir will allow you to choose

your desired temperature with the - / + buttons. MyAir will aim to maintain the

desired temperature in that zone by automatically controlling airow when the

air conditioner is running.

• Temperature Control (Optional)

If temperature control was enabled (by your dealer), different options on how

MyAir will automate your zones will be available. The options are myzone,

mytemp and myauto. This is explain on the following page.

• Motion Zone (Optional)

If your zone has a motion sensor installed then this zone will have the same

functionality as a temperature zone (above) but a walking man symbol will

appear next to it. If you press the walking man symbol it will turn dark grey

indicating the motion sensor is activated for that zone and pressing it again will

deactivate it. Motion controlled Zones are explained on page 10.

20° 24°

Lounge

80%

Kitchen

21° 23°

Theatre

OFF

Master Bed

21° 24°

Bed 1

100%

Bed 2

65%

Bed 3

ZonesMode Setup Help

MyZone

Motion Zone

Airow Zone

Temperature

Zone

Actual

Temperature

in Zone

User Manual V4.0 7

4 - TEMPERATURE CONTROL (OPTIONAL)

MyZone

The MyZone feature makes that particular zone the “information centre” for the

air conditioning unit. That means the set-point for that zone becomes the set-

point the air conditioning unit will work toward. The actual measured temperature

of that zone is the temperature sent to the unit for it to make its decisions about

whether to start/stop or speed up/down to effectively achieve the set-point while

maintaining constant airow in the MyZone.

The MyZone can be any temperature controlled zone that is currently turned ON,

to change the MyZone to another zone press the thermometer symbol next to the

zone you want to be the new MyZone.

This feature can be particularly important when you have an unusually high

requirement for air conditioning in a particular area. For example, a group of

people watching a movie in Theatre room with all the electronic A/V equipment

turned on will have a larger requirement for air conditioning than in other rooms

in the house. Setting the Theatre as MyZone will ensure that the system continues

running until the temperature set-point for that room is achieved.

Only one temperature controlled zone can be the MyZone at any one time, if you

are using multiple zones it is recommended that you make the largest zone the

MyZone and then move the MyZone around as you move around the home.

MyZone is an optional feature available on systems where MyZone has been

enabled; your dealer may enable this feature depending on the way you use your

system and the layout of the installation.

NOTE: MyZone is not available for systems with no temperature sensors

installed.

20° 24°

Lounge

80%

Kitchen

21° 23°

Theatre

OFF

Master Bed

21° 24°

Bed 1

100%

Bed 2

65%

Bed 3

ZonesMode Setup Help

Active MyZone

Press to set this

zone as Myzone

User Manual V4.0 8

4 - TEMPERATURE CONTROL (OPTIONAL)

mytemp

This feature acts as an automated MyZone. mytemp will automatically select the

zone with the greatest difference between actual and desired temperatures. Once

this zone is selected and the desired temp is reached, a new room will be selected

and the process repeated.

NOTE: This mode is only available when using cooling or heating.

There is no need to manually set a zone to be MyZone. MyAir will select a zone as

MyZone for you.

This feature can be particularly important when you have an unusually high

requirement for air conditioning in a particular area at a given time. For example,

a group of people is watching a movie in Theatre room. After two hours, they eat

dinner together. Myzone will transfer automatically from Theatre room to dining

room when the dining room demands higher requirement. Different temperature

can be set on each zone and MyAir will keep changing MyZone to achieve the

desired temperature for each zone.

When this option is enabled, changing the temperature in mode page and

manually selecting a room as myzone is disabled. The adjustment of temperature

can only be done on zone page.

mytemp is active

10hr 30min

Off in

press to set

Timer

low medium high

myfan

cool heat dryfan

ONOFF

ZonesMode Setup Help

User Manual V4.0 9

4 - TEMPERATURE CONTROL (OPTIONAL)

myauto

Taking mytemp to the next level, myauto gives you full temperature automation.

This feature not only selects a zone as MyZone, it will also change the mode of

Aircon between cooling and heating.

When enabled it will average all open zone temps and aim to maintain them at a

temperature between 20 and 24 degrees.

Once this feature is enabled you can select it on the main mode page.

This feature is ideal for ever-changing weather condition, during day and night.

MyAir will change to heat mode on a chilly morning and cool mode in a hot

midday. Like in mytemp, it will automatically assign MyZone to an open zone that

needs a higher requirement.

When this option is enabled, changing the temperature and myzone is not

allowed. MyAir will take care of it.

10hr 30min

Off in

press to set

Timer

low medium high

myfan

cool heat dry myautofan

ONOFF

ZonesMode Setup Help

User Manual V4.0 10

5 - MOTION ZONE (OPTIONAL)

Motion controlled Zones vary the temperature in unoccupied zones in order to

save energy on air conditioning empty spaces.

For example:

You are cooling your home with the master bedroom Zone target temp set at 24oC

with motion enabled. Once MyAir has detected that the bedroom has been empty

for more than 10 minutes it will increase the target temperature by 1oC. Then after

a further 10 minutes of being empty MyAir will increase the temperature again by

1oC, making the new target temperature 26°C. As soon as motion is detected in the

room the target temperature returns to normal.

In the case of heating your home the motion sensor works in reverse, by

decreasing the target temperature in the empty Zone.

HANDY HINT: Motion sensors are designed to save you energy, but to save

even more energy switch off the zones you are not using.

Otros manuales para MyPlace

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Automatización del hogar de ADVANTAGE AIR

ADVANTAGE AIR

ADVANTAGE AIR e-zone Manual de usuario

Manuales populares de Automatización del hogar de otras marcas

Truth Hardware

Truth Hardware Sentry II Manual de usuario

FIBARO

FIBARO FGWPA-111 Manual de usuario

Hezborg

Hezborg BGR8016B Manual de usuario

MYDLINK

MYDLINK Pro Series Manual de usuario

Panasonic

Panasonic KX-HNA101FX Manual de usuario

GamaBit

GamaBit Houseper Manual de usuario

nedis

nedis WIFILRF10C37 Manual de usuario

Veho

Veho TA45 Manual de usuario

Nexa

Nexa ZPR-111 Manual de usuario

Vimar

Vimar 00801 Manual de usuario

Leviton

Leviton 47604-F6 Manual de usuario

EVERSPRING

EVERSPRING AN180 Manual de usuario

Coltech

Coltech 18-1339 Manual de usuario

IDS

IDS NXT vegas Guía

Vimar

Vimar 03975 Manual de usuario

iNels

iNels RFIM-20B Manual de usuario

EVA Logik

EVA Logik ZW30 Manual de usuario

Leviton

Leviton ODCØP-S0W Manual de usuario