Advanced Energy 1316 Manual de usuario

10kW Model 1316 Precision Calorimeter

User Manual

February 2023

1316-900 Revision AA

10kW Precision Calorimeter

This manual and the information contained herein are the proprietary property of Advanced

Energy Industries, Inc.

No part of this manual may be reproduced or copied without the express written permission of

Advanced Energy Industries, Inc. Any unauthorized use of this manual or its contents is strictly

Disclaimer and Limitation of Liability

The information contained in this manual is subject to change by Advanced Energy Industries,

Inc. without prior notice. Advanced Energy Industries, Inc. makes no warranty of any kind

whatsoever, either expressed or implied, with respect to the information contained herein.

Advanced Energy Industries, Inc. shall not be liable in damages, of whatever kind, as a result of

the reliance on or use of the information contained herein.

Product Usage Statement

WARNING

READ THIS ENTIRE MANUAL AND ALL OTHER PUBLICATIONS PERTAINING TO

THE WORK TO BE PERFORMED BEFORE YOU INSTALL, OPERATE, OR MAINTAIN

THIS EQUIPMENT. PRACTICE ALL PLANT AND PRODUCT SAFETY

INSTRUCTIONS AND PRECAUTIONS. FAILURE TO FOLLOW INSTRUCTIONS CAN

CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. IF THE EQUIPMENT IS

USED IN A MANNER NOT SPECIFIED BY THE MANUFACTURER, THE

PROTECTIONPROVIDEDBY THEEQUIPMENTMIGHTBEIMPAIRED. ALL

PERSONNELWHO WORK WITH OR WHO ARE EXPOSED TO THIS EQUIPMENT

MUST TAKE PRECAUTIONS TO PROTECT THEMSELVES AGAINST SERIOUS OR

POSSIBLY FATAL BODILY INJURY.

Advanced Energy Industries, Inc. (AE) provides information on its products and

associated hazards, but it assumes no responsibility for the after-sale operation of the

equipment or the safety practices of the owner or user.

NEVER DEFEAT INTERLOCKS OR GROUNDS.

Trademarks

All Advanced Energy trademarks are the property of Advanced Energy Industries, Inc. For the

list of Advanced Energy trademarks, visit: www.advancedenergy.com/legal/. Any unauthorized

1316-900 Revision AA

10kW Precision Calorimeter

iii

use of Advanced Energy trademarks is prohibited.

All other trademarks are the property of their respective owners.

Customer Feedback

Advanced Energy’s technical writing staff has carefully developed this manual using research-

based document design principles. However, improvement is ongoing, and the writing staff

welcomes and appreciates customer feedback. Please send any comments on the content,

organization, or format of this user manual to: tech[email protected]

To order a manual, please contact Technical Support: [email protected]

1316-900 Revision AA 
10kW Precision Calorimeter
 iv 
Table of Contents 
Safety Information and Precautions..............................................................................1 
Terms in this Manual .................................................................................................................1 
Terms on Equipment..................................................................................................................2 
Symbols as Marked on Equipment ............................................................................................2 
Product Overview and Specifications ...........................................................................3 
Specifications.............................................................................................................................3 
Product Overview ......................................................................................................................6 
Installation and Set-Up ..............................................................................................10 
Unpack the Shipment and Inspect the Contents.......................................................................10 
Control the Installation Environment.......................................................................................10 
Check the Location Where the Unit Will Be Installed ............................................................11 
Typical Equipment List...............................................................................................11 
Instrument Connections.............................................................................................12 
Chiller Preparation.....................................................................................................13 
Calibration Preparation and Instrument Setup.............................................................15 
Calibration ................................................................................................................16 
Data Analysis ............................................................................................................19 
Alignment..................................................................................................................19 
Features and Settings ...............................................................................................20 
Over Temperature Safety.................................................................................................... 20 
Adaptive Fan Control............................................................................................................ 20 
General.....................................................................................................................21 
Warm Up and Stabilization......................................................................................................21 
AC Substitution........................................................................................................................21 
Correction of Error Terms .......................................................................................................21 
Calibrate the Calorimeter Before Use......................................................................................22 
Maintenance .............................................................................................................23 
Periodic Inspection and Servicing ...........................................................................................23 
Troubleshooting Guide ..............................................................................................24 
Unresponsive to power ............................................................................................................24 

1316-900 Revision AA 
10kW Precision Calorimeter
 v 
Appendix A ...............................................................................................................26 
Appendix B –Service Assistance ...............................................................................27 
Returns for Repairs ..................................................................................................................27 
Warranty ..................................................................................................................................27 
Warranty Limitations............................................................................................................ 28 
Statement of Calibration ..........................................................................................................28 
Storage and Shipment ..............................................................................................................29 
Drain the calorimeter system of all coolant ..................................................................... 29 
Expedite Repair & Calibration Form.......................................................................................30 
 

1316-900 Revision AA

10kW Precision Calorimeter

Safety Information and Precautions

The following safety information applies to both operation and service personnel. Safety

precautions and warnings may be found throughout this instruction manual and the equipment.

These warnings may be in the form of a symbol or a written statement.

CAUTION:

DO NOT USE IN EXPLOSIVE ENVIRONMENTS!

The 1314 is not designed for operation in explosive environments.

WARNING:

DO NOT OPERATE WITHOUT COVERS!

This device should be operated with all panels and covers in place. Operation with

missing panels or covers could result in personal injury.

Terms in this Manual

CAUTION:

CAUTION indicates a potentially hazardous situation that, if not avoided, could result in

minor or moderate injury, and/or property damage. CAUTION is also used for property-

damage-only accidents.

WARNING:

WARNING indicates a potentially hazardous situation that, if not avoided, could result

in death or serious injury, and/or property damage.

1316-900 Revision AA

10kW Precision Calorimeter

DANGER:

DANGER indicates an imminently hazardous situation that, if not avoided, will result in

death or serious injury. DANGER is limited to the most extreme situations.

NOTE statements identify best practices or tips for efficiency.

Terms on Equipment

CAUTION indicates a personal injury hazard not immediately accessible as one reads the

marking, or a hazard to property including the equipment itself.

DANGER indicates a personal injury hazard immediately accessible as one reads the marking.

Symbols as Marked on Equipment

CAUTION –RISK OF DANGER

DANGER –Risk of Electric shock

Earth ground terminal

Frame or Chassis terminal

Alternating current

1316-900 Revision AA

10kW Precision Calorimeter

Product Overview and Specifications

Specifications

Measurement Ranges

Specification

Frequency (MHz)

50 Hz to 500 MHz

Power (W)

Connector/Frequency Dependent:

With standard HN connector:

10 W to 10,000 W: 50 Hz to 2 MHz

10 W to 8,900 W: >2 MHz to 13.56 MHz

10 W to 6,200 W: >13.56 MHz to 27.12 MHz

10W to 5,000 W: >27.12 MHz to 40.68 MHz

10W to 4,100 W: >40.68 MHz to 60 MHZ

10 W to 2,200 W: >60 MHz to 200 MHz

10 W to 1,300 W: >200 MHz to 500 MHz

With optional 3-1/8” connector5:

10 W to 10,000 W: 50 to 500 MHz

Connector Type

HN (female) standard, 3-1/8” optional5

Basic Accuracy

1.5 W + 0.3% Rdg1, 2, 3, 5

Power Requirements

Calorimeter

220 –240 VAC, 20 A

Chiller

220 –240 VAC, 20 A

Course Chiller (optional)

208 VAC, 3-Phase, 16.5 A6

AC Source (optional)

208 VAC, 3-Phase, 42 A6

AC Standard (Optional)

100 –240 VAC, 10 A6

Physical Dimensions

(Approximate)

Specifications (continued…)

1316-900 Revision AA

10kW Precision Calorimeter

Calorimeter/Chiller

56” height, 23” width, 30”/50” depth (together in single bay rack (/w/table))

Calorimeter

9” height, 19” width, 30” depth (removed from rack)

Fine Chiller

11” height, 19” width, 25” depth (removed from rack)

Course Chiller (Optional)

63” height, 33” width, 30” depth6

AC Source (Optional)

58” height, 25” width, 34” depth6

AC Standard (Optional)

8” height, 12” width, 23” depth6

Coolant Flow Rate

4 gallons (15.2 Liters) per minute nominal

Drift

< 50% of uncertainty over 48 hours

Input Impedance

50 Ω nominal

Communication

Ethernet

Cooling Fluid

25% DOW-Therm SR-1, 75% distilled water

Operating Temperature

68 to 86 °F (20 to 30 °C)

Storage Temperature

14 to +122 °F (-10 to +50 °C)4

Warranty

1-year Parts & Workmanship for AE-TEGAM-manufactured components

S11 Linear Magnitude (Typical)

Typical < 0.025 at f< 100 MHz, and <0.1 at f>= 100 MHz

Typical S11 Linear Mag Performance

Optional System Components (contact your AE-TEGAM representative for more information).

AC Source

Required for routine calibration of the Calorimeter.

AC Power Meter

Required for routine calibration of the calorimeter.

Course Chiller-Air/Water Cooled

Required to pre-cool cooling fluid before fine cool chiller.

P/C

For control of calorimeter and ancillary equipment.

Other

Contact TEGAM for further details and options.

Average of ten (10) consecutive points taken 25 seconds apart, where the standard deviation of

those points is < 0.05 W.

2The 1316 is intended for use as a primary standard. Measurement repeatability and uncertainties

will vary among laboratories depending upon various factors, including ambient environment,

user experience, and elapsed time since the most recent system calibration. TEGAM will provide

1316-900 Revision AA

10kW Precision Calorimeter

guidance where possible, but users are ultimately responsible for establishing their own

measurement uncertainties consistent with the laboratory’s capabilities.

3 Optional items required to achieve specifications listed. Must use recommended options.

4 Assumes proper preparations are followed prior to storage, including draining the coolant

system.

5 Optional 3-1/8” connector may increase transfer uncertainties if using with adaptors to calibrate

non- 3-1/8” devices.

6Example based on optional equipment in a typical configuration (Air Cooled Orion Chiller,

Preen AC source and Zimmer AC standard). Other options are available.

Tabla de contenidos

Otros manuales de Instrumento de medición de Advanced Energy

Advanced Energy

Advanced Energy 1314 Manual de usuario

Advanced Energy

Advanced Energy LumaSense Technologies E2T QUASAR Series Manual de usuario

Advanced Energy

Advanced Energy Impac 600 Series Manual de usuario

Advanced Energy

Advanced Energy 2818A Manual de usuario

Advanced Energy

Advanced Energy MONROE 282H Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario