ADS-tec VMT6008 Manual de usuario

User Manual

Terminals

VMT6008

Version 1.3

Terminals VMT6008

2 © ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen

Product Portfolio

©ads-tec GmbH

Raiffeisenstr.14

D-70771 Leinfelden-Echterdingen

Germany

erminals VMT6008

INDEX

ABOUT US.......................................................................................................................................... 5

1REMARKS ................................................................................................................................. 6

1.1 RELEVANT DOCUMENTATION FOR THE DEVICE ....................................................................................6

1.2 EXPLANATION OF USED SYMBOLS ....................................................................................................6

1.3 DATA,FIGURES AND MODIFICATION ................................................................................................6

1.4 TRADE MARKS ...........................................................................................................................7

1.5 COPYRIGHTS.............................................................................................................................7

1.6 ENVIRONMENTAL CONDITIONS .......................................................................................................7

1.7 STANDARDS..............................................................................................................................8

1.8 EQUIPMENT VERSION ..................................................................................................................8

1.9 SCOPE OF DELIVERY....................................................................................................................9

2OPERATING INSTRUCTIONS ....................................................................................................... 10

2.1 OPERATING LOCATION............................................................................................................... 10

2.2 DAMAGE DUE TO IMPROPER USE ...................................................................................................10

2.3 WARRANTY /REPAIR.................................................................................................................11

2.4 TREATMENT AND DISPOSAL OF LITHIUM BATTERIES ...........................................................................11

2.5 NOTES ON SAFETY ....................................................................................................................11

2.6 EXTERNAL DEVICE DIMENSIONS.................................................................................................... 12

3COMMISSIONING..................................................................................................................... 13

3.1 AVAILABLE INTERFACES..............................................................................................................13

3.2 ORDER OF STEPS DURING COMMISSIONING .....................................................................................14

3.3 CHECK FOR OPERATIONAL READINESS ............................................................................................ 15

4OPERATION ............................................................................................................................ 16

4.1 FRONT CONTROL KEYS ...............................................................................................................16

4.2 SOFT KEYBOARD ......................................................................................................................18

4.3 TOUCH SCREEN........................................................................................................................19

4.4 STATUS INDICATORS ................................................................................................................. 20

5INTERFACES............................................................................................................................ 21

5.1 INTERFACE SETUP.....................................................................................................................21

5.2 24 VDC POWER SUPPLY............................................................................................................21

5.3 AUTOSTART FUNCTION (S1) ....................................................................................................... 23

5.4 SPEAKERS ..............................................................................................................................24

5.5 USB CONNECTIONS .................................................................................................................. 25

5.6 PS/2 CONNECTOR .................................................................................................................... 25

5.7 NETWORK CONNECTION (RJ45) ..................................................................................................26

5.8 OPTIONAL RADIO NETWORK CARD.................................................................................................27

5.9 SERIAL COM INTERFACE (RS232) ...............................................................................................28

6DRIVES.................................................................................................................................. 29

6.1 HARD DRIVE /FLASH SSD.......................................................................................................... 29

6.2 EXTERNAL DRIVES .................................................................................................................... 29

7SOFTWARE &DRIVER INSTALLATION........................................................................................... 30

Terminals VMT6008

4 © ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen

7.1 INSTALLING THE OPERATING SYSTEM ............................................................................................ 30

7.2 TOUCH SCREEN DRIVER INSTALLATION .......................................................................................... 31

7.3 CONFIGURATION CENTER........................................................................................................... 32

7.4 AUTOMATIC BRIGHTNESS ADAPTATION .......................................................................................... 33

7.5 IGNITION............................................................................................................................... 34

7.6 USB LOCK FUNCTION ............................................................................................................... 35

7.7 ON /OFF PUSHBUTTON CONFIGURATION ...................................................................................... 36

7.8 SOFT KEYBOARD ...................................................................................................................... 37

7.9 SCREEN MOB.......................................................................................................................... 37

7.10 SOFT KEYBOARD ...................................................................................................................... 38

8TECHNICAL DETAILS................................................................................................................. 39

8.1 DISPLAY DATA ........................................................................................................................ 39

8.2 COMPUTER DATA ..................................................................................................................... 39

8.3 GENERAL DATA........................................................................................................................ 39

9SERVICE AND SUPPORT............................................................................................................. 40

9.1 ADS-TEC SUPPORT.................................................................................................................... 40

9.2 COMPANY ADDRESS .................................................................................................................. 40

10 COMPONENT REPLACEMENT ....................................................................................................... 41

10.1 OPENING THE SERVICE SLOT ....................................................................................................... 41

10.2 1. REPLACING THE LITHIUM BATTERY ............................................................................................ 43

10.3 2. REPLACING THE FLASH MODULES .............................................................................................. 44

11 DECLARATION OF CE CONFORMITY ............................................................................................. 46

erminals VMT6008

Pos:1/Datentechni k/AllgemeineHinweise/Wir über uns/Wir überuns@ 2\ mod_1254923190378_6.doc @ 6522@

BOUT U

ads-tec GmbH

Raiffeisenstr. 14

D-70771 Leinfelden

Phone: +49 711 45

Fax: +49 711 458

www.ads-tec.com

s a supplier of h

operatin

roups o

up to date and del

system technology.

ads-tec puts entir

commissioning - an

technology.

The Data Technolo

wide ran

e of indus

ads-tec has special

develops software t

Pos: 2 /D aten tec hni k/Al lg emei ne H inw eis e/R ele vante Do kum enta tio nen zum Ger ät/R el evant e D oku ment ati one n f ür O PC / C PC / OT C / VMT /STC @ 2\mod_1268662117522_6.doc@ 7352 @

Echterdingen

94-0

4-990

h tech equipment, ads-tec supports lar

e e

companies with state-of-the-art technolo

y, kn

ivery of comprehensive services in the area of

solutions for automation into practice - fro

has particularly specialised in manipulation an

y division develops and manufactures PC base

rial PCs, thin clients and embedded systems ava

ised in the adaptation and optimisation of op

ols to complement the offered hardware platfor

terprises and

lobally

ow how that is always

automation, data and

the plannin

to the

material manipulation

solutions and holds a

ilable.

erational systems and

Terminals VMT6008

6 © ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen

1REMARKS

1.1 RELEVANT DOCUMENTATION FOR THE DEVICE

The following documents are essential for setting up and operating this device:

USER MANUAL (THIS DOCUMENTATION):

Contains information for installation, commissioning and operating the device along with

technical data of the device hardware.

WEBSITE

By using the website www.ads-tec.de, you can download drivers, software, user manuals,

leaflets and flyers from the Download section on the website.

Note:

We would recommend you make use of our website contents (www.ads-tec.de) in order

to ensure an optimised data quality and to be quickly and comprehensively informed of

any technical modification.

SERVICE CD:

Contains drivers and user manuals.

Note:

The service CD menu automatically starts if the autostart option for removable media is

activated.

The service CD was created by using Adobe Flash. The service CD menu is even available

if the Flash Player is not installed.

Pos: 3 /D atent echni k/All gemei ne Hin weise/ Erläu terung z u den ver wendet en Sym bole n/Erläu terung z u den ver wendet en Sym bole n @ 0\mod_1158752779484_6.doc@ 141@

1.2 EXPLANATION OF USED SYMBOLS

Warning:

The "Warning" symbol refers to activities which could cause personal injury or damage to

the hardware and software!

Note:

The "Note" symbol describes conditions which unconditionally have to be observed in

order to ensure trouble-free operation. Additionally, hints and advice for the efficient use

of this device and for software optimisation are given using this symbol.

Pos: 4 /D aten tec hni k/Al lg emei ne H inw eis e/D aten, Ab bil dung en, Än der ung en/Dat e n,Ab bild ung en, Än der unge n @ 1\m od_ 123 5480 498 775 _6.d oc @ 5162 @

1.3 DATA,FIGURES AND MODIFICATION

All texts, data and figures are non-binding. All these materials are subject to modification

due to technological advances. Our products comply with all provisions and requirements

of the legislation at the point in time when the products leave our company premises. The

operator/operating company bears sole responsibility for the compliance with any

consecutive new technological development or adherence to any consecutive new

legislatory provision, as well as for the observance of their obligation as the

operator/operating company.

Pos:5/Datentechni k/Allgemei neHinweise/Warenzeichen/Warenzeichen @ 2\mod_1263298182965_6.doc @ 6972@

erminals VMT6008

1.4 TRADE MARKS

We would like to emphasise that all names of hardware and software products used in this

documentation, as well as all brand names of corresponding companies are subject to the

general copyrights of the intellectual property in terms of trademarks, brand names and

patents.

Windows®, Windows®CE are registered trademarks of Microsoft Corp.

Intel®, Pentium®, Atom™, Core™2, are registered trademarks of Intel Corp.

IBM®, PS/2®and VGA®are registered trademarks of IBM Corp.

CompactFlash®is a registered trademark of the Compact Flash Association.

RITTAL®is a registered trademark of Rittal Werk Rudolf Loh GmbH & Co. KG.

Any other national and international trademarks and product names shall hereby also be

recognised.

Pos:6/Datentechni k/AllgemeineHinweise/Urheberrecht/Urheberrecht @ 0\mod_1158756954232_6.doc@ 153 @

1.5 COPYRIGHTS

This manual including all contained figures is protected by copyright law. Any use of this

manual by a third party in non-compliance with the international copyright law shall hereby

be prohibited. Any reproduction, translation and electronic or photographic archiving or

modification requires previous written agreement by ads-tec GmbH.

In the event of non-compliance, you shall be obliged to compensate for damages.

Pos:7/Datentechni k/Allgemeine Hinweise/Umweltbedingungen/UmweltbedinungenfürVMT60xx-Serie@ 2\mod_1263307758056_6.doc@ 6981 @

1.6 ENVIRONMENTAL CONDITIONS

The device may be operated under the following conditions. Failure to observe these

specifications will terminate any warranty for this device. Ads-tec cannot be held liable for

any damages arising due to improper use and handling.

•Temperature for devices without a heater

In operation -20 ... 55°C

For storage -30 ... 60°C

•Temperature for devices including a heater

In operation -30 ... 55°C

For storage -30 ... 60°C

•Humidity:

In operation 10 … 85% without condensate

For storage 10 … 85% without condensate

•Vibration resistance

Standard EN 60068-2-6 / 1 G, 10 … 150 Hz

Additionally applies MIL-STD 810F (01.2000), annex C. figure 514.5C

(US highway truck transportation)

•Shock resistance

Standard EN 60068-2-27 / 5 G, with a half-wave of 11 ms duration

Pos:8/Datentechni k/Allgemei neHinweise/N ormen/N ormen f ürVMT-Serie@ 2\mod_1263309234182_6.doc @ 6984@

Terminals VMT6008

8 © ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen

1.7 STANDARDS

This device complies with the requirements and protective aims of the following EC

regulations:

•This device meets the test requirements for granting the CE sign according to the

European test standards EN 61000-6-4 and EN 61000-6-2.

•This device complies with the test requirements in accordance with DIN EN 60950

(VDE0805, IEC950) "Safety of Information Technology Equipment"

•The device meets the DIN EN 60068-2-6 test requirements (sinus excitation).

•The device meets the DIN EN 60068-2-27 test requirements (shock resistance

test).

Note:

All connected components, as well as cable connections must also meet these

requirements for compliance with the EMC legislation. For this reason, screened bus and

LAN cables including screened connectors must be used and installed according to the

instructions in this user manual.

Note:

By using the CE conformity declaration in this document, you can find detailed

information about the standards applicable to this device.

Warning:

This is equipment of class A. This unit might cause radio interferences in living areas; in

this case the operator might be obliged to take suitable protective measures at the

operators’ expense."

Pos: 9 /D atent echni k/All gemei ne Hin weise/ Auss tattung svar iant en/Aus stat tungs varia nten für VM T60 08 @ 2\mo d_127 2445 94224 8_6.d oc @ 7711 @

1.8 EQUIPMENT VERSION

The system is available in the following equipment version:

Platform including a Flash SSD:

Platform without any rotating mass storage medium (hard disc, etc.) and with an

embedded operating system (Windows CE 6.0 / XP embedded) for stationary use with a

standard Ethernet or with radio networking cards installed on moving commissioning /

forklift equipment.

Pos:10/Datentechni k/AllgemeineHinweise/Lieferumfang/Lieferumfang fürVMT 60xx-Serie @ 2\mod_1263299644184_6.doc @ 6976 @

erminals VMT6008

1.9 SCOPE OF DELIVERY

Please check that all of the following components are contained in the packaging:

•1 x device

•4-pin lead-through connector from Phoenix Contact, COMBICON MC

1.5/4-STF3.81

•Service CD

•Protective covers

Optional delivery scope

•Operating system

•Installation kit

Pos: 11 /D atent ech nik/Bet riebs hin weise/ Betri ebsort /Betr iebs ort für VM T-Ser ie @ 2\m od_12 6884 13529 05_6. doc @ 748 6 @

Terminals VMT6008

10 © ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen

2OPERATING INSTRUCTIONS

This device contains electrical voltages and extremely sensitive components. The

manufacturer, or a service partner authorised by the manufacturer, should be consulted if

you plan to make any modifications. For this type of work, the device must be switched off

at the mains and the power lead must be disconnected. Suitable measures for avoiding

electrostatic discharge towards parts of the components when touching the equipment

must be taken. If the device is opened by an unauthorised person, hazards for the user

might arise and any warranty claim will cease.

General instructions:

•All users must read this manual and have access to it at all times.

•Installation, commissioning and operation may only be carried out by trained and

qualified staff.

•The security instructions and the manual itself must be observed by all persons

who work with this device.

•At the location of use the valid guidelines and regulations for accident prevention

must be observed.

•The manual contains the most important instructions on how to use this device in

a safe way.

•Appropriate storage, proper transport, installation and commissioning, as well as

careful operation are prerequisites for ensuring safe and proper operation of the

device.

•The device can be cleaned by using a soft cloth and a commercially available glass

cleaning agent (e.g. "Sidolin") with low alcohol content.

Warning:

Any leads (e.g. power leads, interface cables) may only be connected if the device is

switched off in order to avoid damaging the device.

2.1 OPERATING LOCATION

The VMT control system is designed for use on support arm systems or on moving

transport equipment (like commissioning trolleys, forklifts or similar). You must take care

that the environmental conditions specified in the technical data specification are met.

Using the device in non-specified environments, for example, on board ships, or in areas

that might contain explosive gases or in extreme heights is prohibited.

Warning:

The device may only be switched on after acclimatising to the ambient temperature in

order to avoid condensate accumulation. The same applies if the device has previously

been exposed to extreme temperature variations.

To avoid overheating in operation: The device must not be exposed to direct radiation by

sunlight or any other light or heat source.

2.2 DAMAGE DUE TO IMPROPER USE

If the control system shows any obvious damage, e.g. caused by improper operating or

storage conditions or by improper use or handling, you must immediately put the device

out of operation and protect it from being accidentally switched on.

Pos: 13 /D atent ech nik/Bet riebs hin weise/ Gewä hrleis tung / R epara tur/G ewähr leist ung / Repar atur @ 0\ mod_11 5882 80544 27_6. doc @ 223 @

Tabla de contenidos

Otros manuales de Terminal táctil de ADS-tec

ADS-tec

ADS-tec VMT9000 Series Manual de usuario

ADS-tec

ADS-tec VMT7000 series Manual de usuario

ADS-tec

ADS-tec VMT8000 series Manual de usuario

ADS-tec

ADS-tec HDT8012 Manual de usuario

ADS-tec

ADS-tec VMT6000 series Manual de usuario

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario