ADLINK Technology NEON-1000-MDX Series Manual de usuario

Leading EDGE COMPUTING
NEON-1000-MDX Series
AI Smart Camera
User’s Manual
Manual Rev.: 1.0
Revision Date: August 26, 2020
Part No: 50-1Z331-1000

ii Revision History
Leading EDGE COMPUTING
Revision History
Revision Release Date Description of Change(s)
1.0 2020-08-26 Initial release

Preface iii
NEON-1000-MDX
Preface
Copyright © 2020 ADLINK Technology, Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Leading EDGE COMPUTING
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
ATTENTION: Informations destinées à prévenir les blessures
corporelles mineures, les dommages aux composants, la perte
de données et/ou la corruption de programme lors de l'exécu-
tion d'une tâche.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
AVERTISSEMENT: Informations destinées à prévenir les bles-
sures corporelles graves, les dommages aux composants, la
perte de données et/ou la corruption de programme lors de
l'exécution d'une tâche spécifique.

Table of Contents v
NEON-1000-MDX
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures....................................................................... vii
List of Tables.......................................................................... ix
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 2
1.3 General Specifications......................................................... 3
1.4 Mechanical Dimensions....................................................... 5
1.4.1 Camera Dimensions...................................................5
1.4.2 USB Type-C Screw Lock Location and Dimensions ..5
1.4.3 LED Light Mounting Thread........................................6
2 Connectors and I/O............................................................ 7
2.1 Bottom Side I/O and Connector Description........................ 8
2.1.1 D-sub I/O Connector...................................................9
2.2 Top Side I/O and Connector Description........................... 11
2.3 Front Side I/O and Connector Description......................... 12
3 Getting Started ................................................................. 13
3.1 Mounting the Device.......................................................... 13
3.2 Digital I/O Connections...................................................... 14
3.3 Attaching a Lens................................................................ 15
3.4 Power and Peripheral Connections ................................... 16
3.5 Image Capture and Inference............................................ 18
3.5.1 Image Capture Sample Code...................................18
3.5.2 Image Capture and Inference Sample Code............20

vi Table of Contents
Leading EDGE COMPUTING
3.6 Using the Basler pylon Utility............................................. 22
3.6.1 Capturing Images with pylon ....................................22
3.6.2 Modifying Image Sensor Settings with pylon............24
3.6.3 Using APIs to Modify Image Sensor Settings...........32
Important Safety Instructions............................................... 33
Consignes de Sécurité Importante...................................... 35
Getting Service...................................................................... 37

List of Figures vii
NEON-1000-MDX
List of Figures
Figure 2-1: NEON-1000-MDX Orientation .........................................7
Figure 2-2: Bottom Side I/O and Connectors.....................................8
Figure 2-3: D-sub I/O Connector........................................................9
Figure 2-4: Top Side I/O and Connectors........................................11
Figure 2-5: Front Side I/O and Connectors......................................12
Figure 3-1: NEON-1000-MDX Mounting Holes................................13
Figure 3-2: Digital Input Schematic Diagram ...................................14
Figure 3-3: Digital Output Schematic Diagram.................................14
Figure 3-4: Lens Attachment Assembly...........................................15
Figure 3-5: Separate Power and Peripheral Connections................16
Figure 3-6: Combined Power and Peripheral Connections..............17
Figure 3-7: Single-Shot Image Capture...........................................19
Figure 3-8: Continuous Image Capture............................................20
Figure 3-9: Image Capture and Inference........................................21

viii List of Figures
Leading EDGE COMPUTING
This page is intentionally left blank.

List of Tables ix
NEON-1000-MDX
List of Tables
Table 1-1: NEON-1000-MDX Model and Sensor Specifications .1
Table 2-1: Bottom Side I/O and Connectors................................8
Table 2-2: D-sub I/O Connector Pin Definitions...........................9
Table 2-3: D-sub I/O Connector Specifications .........................10
Table 2-4: Top Side I/O and Connectors...................................11
Table 2-5: Front Side I/O and Connectors.................................12

xListofTables
Leading EDGE COMPUTING
This page is intentionally left blank.
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Cámara digital de ADLINK Technology

ADLINK Technology
ADLINK Technology NEON-1020 Manual de usuario

ADLINK Technology
ADLINK Technology NEON-1021-M Manual de usuario

ADLINK Technology
ADLINK Technology NEON-2000-JNX Series Manual de usuario

ADLINK Technology
ADLINK Technology NEON-2000-JNX Series Manual de usuario

ADLINK Technology
ADLINK Technology EVA SDK Manual de usuario

















