ADF Web PROFINET / KNX Manual de usuario
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 1 di 23
User Manual
Revision 1.000
English
PROFINET / KNX - Converter
(Order Code: HD67818-KNX-B2)
for Website information:
www.adfweb.com? roduct=HD67818
for rice information:
www.adfweb.com? rice=HD67818-KNX-B2
Benefits and Main Features:
Very easy to configure
Electrical isolation
Temperature range: -40°C/85°C (-40°F/185°F)
For others KNX products, see also the following links:
Converter KNX to
www.adfweb.com? roduct=HD67801 (BACnet Master)
www.adfweb.com? roduct=HD67802 (BACnet lave)
www.adfweb.com? roduct=HD67803 (CAN)
www.adfweb.com? roduct=HD67804 (CANopen)
www.adfweb.com? roduct=HD67807 (EtherNet/IP)
www.adfweb.com? roduct=HD67808 (DeviceNet Master)
www.adfweb.com? roduct=HD67809 (DeviceNet lave)
www.adfweb.com? roduct=HD67810 (J1939)
www.adfweb.com? roduct=HD67811 (M-Bus Master/wM-Bus)
www.adfweb.com? roduct=HD67812 (Modbus Master)
www.adfweb.com? roduct=HD67813 (Modbus lave)
www.adfweb.com? roduct=HD67814 (Modbus TCP Master)
www.adfweb.com? roduct=HD67815 (Modbus TCP lave)
www.adfweb.com? roduct=HD67820 ( NMP)
www.adfweb.com? roduct=HD67821 (DMX)
Do you have an your customer protocol?
www.adfweb.com? roduct=HD67003
Do you need to choose a device? do you want help?
www.adfweb.com?Cmd=helpme
User Manual
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 2 di 23
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
OWER SU LY 7
FUNCTION MODES 8
LEDS 9
KNX 10
ETHERNET 11
USE OF COM OSITOR SW67818 12
NEW ROJECT / O EN ROJECT 13
SOFTWARE O TIONS 14
SET COMMUNICATION 15
KNX ACCESS 16
XML FILE 17
U DATE DEVICE 18
MECHANICAL DIMENSIONS 20
ORDERING INFORMATIONS 21
ACCESSORIES 21
DISCLAIMER 22
OTHER REGULATIONS AND STANDARDS 22
WARRANTIES AND TECHNICAL SU ORT 23
RETURN OLICY 23
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVI ION LI T:
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARK :
All trademarks mentioned in this document belong to their respective
owners.
Revision
Date Author Chapter
Description
1.000 15/06/2015
Ff All First Release
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 3 di 23
ECURITY ALERT:
G
ENERAL
I
NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I
NTENDED
U
E
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q
UALIFIED
P
ER ONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R
E IDUAL
R
I K
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE
CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 4 di 23
EXAMPLE OF CONNECTION:
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 5 di 23
CONNECTION CHEME:
Figure 1: Connection scheme for HD67818-KNX-B2
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 6 di 23
CHARACTERI TIC :
The HD67818 is a ROFINET / KNX Converter.
It has the following characteristics:
Up to 1440 bytes in reading and 1440 bytes in writing;
Triple isolation between KNX - ower Supply, KNX – Ethernet, ower Supply - Ethernet.
Two-directional information between KNX bus and ROFINET bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67818 software on your C in order to perform the following:
Define the parameter of ROFINET line;
Define the parameter of KNX line;
Define the KNX messages that the Converter can accept;
Define the KNX frames that the Converter sends trough the KNX line;
Define the map of KNX byte that must be written in the ROFINET side;
Define the map of which ROFINET I/O must be written in KNX messages;
Update the device.
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 7 di 23
POWER UPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67818-KNX-B2 3.5
HD67818-KNX-B2
Caution: Not reverse the polarity power
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 8 di 23
FUNCTION MODE :
The device has got two functions mode depending of the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for upload the roject and/or Firmware.
For the operations to follow for the updating, see ‘U DATE DEVICE’ section.
According to the functioning mode, the LEDs will have specifics functions, see ‘LEDS’ section.
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 9 di 23
LED :
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: Device State (green) Blinks slowly (~1Hz) ON: Device powered
OFF: Device not powered
2: ROFINET communication
(yellow) Blinks when ROFINET communication is running Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: KNX communication
(yellow) Blinks when KNX frame is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: Not used (yellow) OFF Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet Link (green) ON: Ethernet cable connected
OFF: Ethernet cable disconnected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
6: KNX rogrammation (red) ON: KNX rogrammation activated
OFF: KNX rogrammation not activated
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 agina 10 di 23
KNX:
KNX is the standard that allows the automated and decentralized management of the technologic plans of
a big typology of structures: commercial buildings, factories, houses, public locals, schools and so on.
KNX can be used in all the applications and functions for the building automations: from lighting to control
dampers, to the security, to the heating monitoring, to the conditioning, to the hydric control and alarms,
to energy management and so on.
Characteristics Description TP1-256
Medium Shielded Twisted air
Topology Linear, Star, Tree or mixed
Baudrate 9600 bps
Device supplying Normal: bus powered devices
Optional: remote powered devices
Device power consumption 3 mA- 12 mA
ower Supply Unit ( SU) DC 30 V
Number of SU’s per physical
Segment Max. 2
Number of connectable devices
per physical Segment Max. 256
Number of addressable devices
per physical Segment Max. 255
Total cable length per physical
Segment Max. 1000 m
Distance between two devices Max. 700 m
(*) Taken from KNX specifications
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Convertidor de medios de ADF Web
ADF Web
ADF Web HD67423 Manual de usuario
ADF Web
ADF Web IO-Link / CAN Manual de usuario
ADF Web
ADF Web Axis HD67838-B2-Y Manual de usuario
ADF Web
ADF Web HD67D25-B2-868MHz Manual de usuario
ADF Web
ADF Web HD67B08-2-B2 Manual de usuario
ADF Web
ADF Web HD67450 Manual de usuario
ADF Web
ADF Web HD67598-A1 Manual de usuario
ADF Web
ADF Web HD67E15-A1 Manual de usuario
ADF Web
ADF Web HD67B09-2-B2 Manual de usuario
ADF Web
ADF Web HD67B12-B2 Manual de usuario
ADF Web
ADF Web HD67E67-A1 Manual de usuario
ADF Web
ADF Web HD67E57-A1 Manual de usuario
ADF Web
ADF Web HD67223-A1 Manual de usuario
ADF Web
ADF Web HD67950-B2 Manual de usuario
ADF Web
ADF Web HD67446 Manual de usuario
ADF Web
ADF Web HD67458 Manual de usuario
ADF Web
ADF Web HD67E10-A1 Manual de usuario
ADF Web
ADF Web HD67C73-B2 Manual de usuario
ADF Web
ADF Web HD674-A028 Manual de usuario
ADF Web
ADF Web HD67660-A1 Manual de usuario
