ADEMCO VIA-30PSE Manual de usuario

For a detailed review of the entire system, please view the Ademco Via –30PSE system manual.

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].

To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Ademco Via 30PSE operates on a UB 1270 battery.

Quick Guide: Ademco Via-30PSE

Loss of AC power and use of backup battery power is indicated by NO AC. or AC LOSS.

A low battery condition is indicated by BAT or SYSTEM LO BAT

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number].

To unbypass a zone, disarm the system.

Change Time and Date

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [2] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, enter your [security code] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the alarm

event history.

Security Codes

Your system allows for additional users, however only the Master user can assign user codes to users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three seconds

for the keypad to verify.

Trouble Conditions

Trouble conditions are issues that require your attention and are indicated on your panel’s display by the

word CHECK + zone number and accompanied by beeping from the touchpad.

To silence Trouble Conditions beeping, check that the zone’s protected areas are closed and secure.

For wireless sensors, check that no environmental changes have blocked the wireless sensor.

If the problem is corrected, enter your [security code] + [OFF] sequence twice.

For a list of Trouble Conditions other than CHECK, please see your Ademco Via –30PSE system manual.

Otros manuales para VIA-30PSE

Tabla de contenidos

Otros manuales de Sistema de seguridad de ADEMCO

ADEMCO

ADEMCO 4110DL Manual de usuario

ADEMCO

ADEMCO LYNXR Manual de usuario

ADEMCO

ADEMCO Vista-10P Instrucciones de montaje

ADEMCO

ADEMCO VISTA-10ES Instrucciones de montaje

ADEMCO

ADEMCO Vista-10SEa Manual de usuario

ADEMCO

ADEMCO VISTA-20SE Manual de usuario

ADEMCO

ADEMCO Vector Manual de usuario

ADEMCO

ADEMCO LYNXR Manual del propietario

ADEMCO

ADEMCO LYNX Manual de usuario

ADEMCO

ADEMCO Security System VISTA-15 Instrucciones de montaje

ADEMCO

ADEMCO 1021 Manual de usuario

ADEMCO

ADEMCO VSTA-20se Manual de usuario

ADEMCO

ADEMCO 4110XM Manual de usuario

ADEMCO

ADEMCO Security Center 4160 Manual de usuario

ADEMCO

ADEMCO LYNX Manual de usuario

ADEMCO

ADEMCO 4110DL Manual de usuario

ADEMCO

ADEMCO Vista-2000 Instrucciones de funcionamiento

ADEMCO

ADEMCO galaxy 8 Manual de usuario

ADEMCO

ADEMCO Alert II Manual de usuario

ADEMCO

ADEMCO 5800WAVE Instrucciones de montaje

ADEMCO

ADEMCO Vista Series 4120EC Manual de usuario

ADEMCO

ADEMCO Vista-10SEa Manual de usuario

ADEMCO

ADEMCO Via-30P Manual de usuario

ADEMCO

ADEMCO VISTA-32FB Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario