ACV Comfort E Series Guía del usuario

100 - 130 - 160 - 210 - 240

Comfort E

InstallatIon, operatIng and

servIcIng InstructIons

2661Y1400• C

TABLE OF CONTENTS

GENERAL 3

Notes 3

Packaging 3

SAFETY PRECAUTIONS 4

Symbols used 4

Recommendations 4

APPLIANCE DESCRIPTION 5

Operation in accordance with instructions 5

TECHNICAL CHARACTERISTICS 6

General characteristics 6

I NSTAL L ATI ON 7

Position 7

Dimensions 8

Wiring diagram 8

Hydraulic connection 9

BRINGING INTO SERVICE 12

Filling the DHW tank 12

Filling the heating circuit of the tank 12

Checks before bringing into service 13

MAINTENANCE 14

Periodic checks by the user 14

Annual maintenance 14

Replacement of the electric heating element 14

Drainage 15

661Y1400• C

GENERAL

NOTES

This manual forms part of the items delivered with the appliance and must be given to the user

to keep in a safe place!

The system must be installed, commissioned, serviced and repaired by an approved installer,

inaccordance with current standards in force.

The manufacturer declines all liability for any damage caused as a result of incorrect installation

or in the event of the use of appliances or accessories that are not specified by the manufacturer.

This appliance is not intended for use by persons with reduced physical, sensory or mental

capacities, or lack of experience and knowledge (including children), unless they have been

supervised or instructed concerning use of the appliance by a person responsible for their safety.

The manufacturer reserves the right to change the technical characteristics and

features of its products without prior notice.

The availability of certain models as well as their accessories may vary according to

markets.

The installation must comply with the instructions contained in this manual as well as

with the regulations governing installations for hot water production.

PACKAGING

The units are delivered assembled, tested and packaged in a cardboard box.

Package contents

• An hot water production tank.

• An multilingual technical instructions.

• An wall-mounting kit with support and one flow diverter.

4661Y1400• C

SAFETY INSTRUCTIONS

SYMBOLS USED

Description below of the symbols used in this technical manual:

RECOMMENDATIONS

Before installing and bringing the appliance into service, first carefully read

thismanual.

It is strictly prohibited to modify the interior of the appliance in any way, without

themanufacturer's prior written agreement.

The appliance must be installed by a qualified engineer, in accordance with current

regulations.

The installation must comply with the instructions contained in this manual as well

as current regulations governing hot water production installations.

Failure to follow the instructions describing test operations and procedures could

result in personal injury or a risk of environmental pollution.

In order to ensure the appliance operates correctly, it is important to have it serviced

by an approved contractor every year.

If there is a problem please contact your contractor for advice.

Faulty parts must only be replaced with original factory parts.

Essential instruction

forthecorrect operation

oftheinstallation.

Essential instruction

forthesafety of persons

andtheenvironment.

Danger!

Risk of serious injury.

We accept no responsibility in the event of damage caused by failure to follow

theinstructions appearing in this technical manual.

661Y1400• C

OPERATION IN ACCORDANCE

WITH INSTRUCTIONS

Our domestic hot water tanks are

designed and manufactured exclusively

for there-heating and storage of domestic

hotwater.

The domestic hot water heaters must only

be heated using heated water in a closed

circuit.

The tank is equipped with an electric

element of 2200 W controlled by the

thermostat of the Comfort E.

Key

1. Cold water inlet

2. Domestic hot water outlet

3. Manual air vent valve

4. Primary fluid inlet

5. Primary fluid outlet

6. 30 mm of insulation in polyurethane

(without CFCs)

7. Primary carbon steel tank

8. DHW stainless steel tank

9. Rigid polypropylene cover

10. External polypropylene casing

11. Stainless steel dry-well

12. Electric heating element

APPLIANCE DESCRIPTION

6661Y1400• C

TECHNICAL CHARACTERISTICS

General characteristics *

Comfort E

100 130 160 210 240

Total capacity L 105 130 161 203 242

Primary capacity L 30 55 62 77 78

Primary heating power input kW 18 19 25 28 37

Operating pressure (DHW) bar 8,6 8,6 8,6 8,6 8,6

Operating pressure (primary) bar 3 3 3 3 3

Max. design pressure bar 10 10 10 10 10

Primary ow rate L/s 0,83 0,83 0,83 0,83 0,83

Standing heat loss kWh/24h 2,73 2,73 2,92 3,82 3,87

Initial heating time minutes 9 : 10 9 : 10 8 : 50 8 : 50 8 : 50

Max. temperature ° C 90 90 90 90 90

Heating surface area m21.03 1.03 1.26 1.54 1.94

Operating system : 85°C T° of water supply : 10°C

Supply pressure

- 6 bar max. without requiring a pressure reducer.

Water quality

• Chlorides < 150 mg/L

• 6 ≤ pH ≤ 8

• If the water hardness is > 20°fH, it is advisable to install a water softener.

(*) Standard EN 12897 : 2006

661Y1400• C

INSTALLATION

POSITION

The hot water cylinder must be installed in an area that is dry and protected from the elements.

Choose the most suitable location according to the position of the boiler and distance

tothedomestic hot water supply, in order to reduce temperature and pressure drops within the

pipe work.

The appliance should be positioned to allow the replacement of the sparge tube and

dry well during servicing, if required.

The Comfort E must be assembled with the heating electrical heating element to the

bottom (DHW pipes to the bottom).

8661Y1400• C

INSTALLATION

DIMENSIONS

Comfort E

100 130 160 210 240

Amm 845 1005 1205 1475 1720

Bmm 580 740 940 1210 1455

Cmm 215 215 215 215 210

D Ø 1" 1" 1" 1"1/4 1"1/4

Drained weight kg 37 40 47 58 65

WIRING DIAGRAM

Operating voltage : 230 V ~ 50 Hz

Key

1. Power supply plug

2. Control thermostat [60-90°C]

3. Manual RESET high limit thermostat

[103°C max.]

4. Summer/winter swicth

5. Domestic hot water priority relay

6. Electric heating element

7. Loding pump [in option]

Y/Gr

BrBrWW

Y/Gr

BBB

BBr

Ø 3/4" Ø 3/4"

360

300

Ø 563 mm

Ø 3/4" Ø 3/4"

360

300

Ø 563 mm

661Y1400• C

INSTALLATION

HYDRAULIC CONNECTION

The installation of a safety unit

iscompulsory.

To avoid water discharge on to the

tank, the safety unit must never

be installed above the tank.

In certain countries the domestic

kits must be approved and

included a temperature and

pressure relief valve fitted in the

hot outlet.

To avoid any risk of corrosion,

connect the stainless steel tank

directly to the earth.

Hot water can burn!

ACV recommends using

apreset thermostatic mixer

valve in order to provide hot

water at a maximum of 60°C.

Recommendations

• The tank’s cold water supply pipe must

be fitted with a safety unit that includes

at least: an isolating valve, anon-return

valve, a domestic safety valve calibrated

to 7 bar and an expansion vessel of

suitable size.

• When the operating pressure exceeds

6 bar, a pressure reducer (2) must be

installed before the safety unit.

• Union fittings are recommended

for the easy dismantling of the DHW

connections. Ideally, the “dielectric”

version is favourable to protect

theconnections from corrosion with

the presence of different metals such

ascopper and galvanised steel.

• The installation of a domestic expansion

vessel avoids discharge from the safety

valve (loss of water).

• Capacity of domestic water vessels:

5 Litres for the models : 100 / 130

8 Litres for the models : 160 / 210

12 Litres for the model : 240

Refer to the manufacturer’s

technical instructions on the

expansion vessel for more details.

DHW connection kit available

(code:10800102)

A. DHW temperature control valve

B. Mixed domestic hot water outlet

C. Cold water supply

D. Drainage connection

E. DHW expansion vessel connection

S. Safety valve (7 bar)

TH. Tank hot water outlet

TC. Tank cold water inlet

TCTH

10 661Y1400• C

INSTALLATION

CONNECTION TO THE HEATING CIRCUIT

Key

1. Heating stop valve

2. Charging pump

3. Check valve

4. Stop valve

5. Primary circuit filling valve

6. Drain down valve

7. Manual air vent valve

DOMESTIC HOT WATER CONNECTION

Key

1. Domestic water supply valve.

2. Pressure reducer

3. Check valve

4. Stop valve

5. DHW expansion vessel

6. Pressure gauge

7. Safety valve

8. Drain down valve

9. Hot water outlet

10. Earth connection

1 2

1 4

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Caldera de ACV

ACV

ACV Prestige 18 Manual de usuario

ACV

ACV Delta F25 Manual del propietario

ACV

ACV Prestige Box 250 LP Guía del usuario

ACV

ACV BNE 2 Condens Manual

ACV

ACV HeatMaster 201 Manual de usuario

ACV

ACV 2004 Manual de usuario

ACV

ACV Delta Manual de usuario

ACV

ACV SLE Plus 210 Manual del propietario

ACV

ACV Kompakt HRE eco 12 Solo Manual de usuario

ACV

ACV Smart line SLE W 100 Guía del usuario

ACV

ACV SMART 130 GREEN Manual

ACV

ACV SV - 35 Manual de usuario

ACV

ACV E-Tech W 09 Mono Manual del propietario

ACV

ACV The Challenger Guía

ACV

ACV E-tech P 201 Instrucciones de instalación y mantenimiento

ACV

ACV HeatMaster 200N Booster Manual

ACV

ACV Compact N1 Manual de usuario

ACV

ACV HeatMaster TC Manual de servicio

ACV

ACV HeatMaster 25 TC Manual del propietario

ACV

ACV Smart Line SLE 130 Manual del propietario

ACV

ACV SmartLine SLME Manual de usuario

ACV

ACV HeatMaster 200N Booster Manual de usuario

ACV

ACV Prestige 50 Manual del propietario

ACV

ACV Prestige PVC Manual de usuario

Manuales populares de Caldera de otras marcas

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manual de usuario

Radijator

Radijator BIO max 23.1 Manual de usuario

Brunner

Brunner BSV 20 Manual de usuario

Buderus

Buderus Logamax GB062-24 KDE H V2 Manual de usuario

Potterton

Potterton 50e Hoja de datos

UTICA BOILERS

UTICA BOILERS TriFire Manual de usuario

Joannes

Joannes LADY Series Manual

ECR International

ECR International UB90-125 Manual de instrucciones

Froling

Froling FHG Turbo 3000 Manual de usuario

Froling

Froling P4 Pellet 8 - 105 Manual de usuario

U.S. Boiler Company

U.S. Boiler Company K2 Manual de usuario

Henrad

Henrad C95 FF Manual de usuario

NeOvo

NeOvo EcoNox EF 36 Manual de usuario

Potterton

Potterton PROMAX SL 12 Manual de usuario

Eco Hometec

Eco Hometec EC 25 COMPACT Manual de usuario

Viessmann

Viessmann VITODENS 200 Guía

Baxi

Baxi Prime 1.24 Manual de usuario

REXNOVA

REXNOVA ISA 20 BITHERMAL Manual de usuario