Acuity Brands NLight UNITOUCH Manual de usuario

NLIGHT®

UNITOUCH

USER MANUAL

2.0

Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.acuitycontrols.com | © 2019 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 11/14/2019 
Contents 
 
Overview .................................................................................................................................................................................4 
Installation ..............................................................................................................................................................................5 
Wiring Recommendations ..................................................................................................................................................5 
Mounting Instructions ........................................................................................................................................................5 
Installation Instructions ......................................................................................................................................................6 
Out-of-Box Defaults ................................................................................................................................................................7 
User Levels ..............................................................................................................................................................................7 
Getting Started........................................................................................................................................................................ 8 
Initial Configuration ............................................................................................................................................................8 
Logging in as Administrator ................................................................................................................................................9 
Logging out of Administrator............................................................................................................................................10 
Main Dashboard Screens ......................................................................................................................................................10 
Light Control Dashboard.......................................................................................................................................................11 
Light Channel Control List.................................................................................................................................................12 
Scene Control Dashboard .....................................................................................................................................................13 
Activating a Scene.............................................................................................................................................................13 
Viewing a Scene ................................................................................................................................................................14 
Editing a Scene..................................................................................................................................................................14 
Creating a New Scene .......................................................................................................................................................18 
Deleting a Scene................................................................................................................................................................19 
Shade Control Dashboard.....................................................................................................................................................20 
Channel List and Control...................................................................................................................................................21 
Hamburger Menu..................................................................................................................................................................22 
About.....................................................................................................................................................................................22 
Settings..................................................................................................................................................................................23 
Display...............................................................................................................................................................................24 
Navigation Order...............................................................................................................................................................25 
Manage PINs .....................................................................................................................................................................26 
Factory Reset ....................................................................................................................................................................27 
Technician Mode...................................................................................................................................................................28 
Channels............................................................................................................................................................................28 
Show/Hide Channels.........................................................................................................................................................31 
Inputs ................................................................................................................................................................................32 
Outputs .............................................................................................................................................................................34 
SensorView............................................................................................................................................................................36 
Changing PINs ...................................................................................................................................................................36 
Uploading a custom screen saver .....................................................................................................................................37 

Enabling a channel ............................................................................................................................................................38

Overview

The nLight® UNITOUCH is an elegant capacitive touch screen wall switch that leverages the perfect blend between

aesthetic design and intuitive user experience to enable control of any nLight controlled space. Developed with end-

users first in mind, the nLight® UNITOUCH is an easy-to-install wall switch that enables control of nLight-enabled devices,

scenes, shades and channels behind a multi-user access level architecture. The nLight UNITOUCH allows wireless control

using the MyPersonify mobile app through its equipped Bluetooth(R) Low Energy (BLE).

The nLight® UNITOUCH is a multichannel user control device that displays up to 16 individual channels of control

and 16 lighting scenes/shades.

This document covers common configuration and management tasks that arise when setting up and maintaining

the nLight® UNITOUCH as well as step by step instructions for accomplishing various tasks.

Installation

The nLight® UNITOUCH is equipped with two RJ-45 ports for CAT5 connection to other nLight-enabled devices as

well as a set of polarity insensitive power terminals for low voltage power.

Wiring Recommendations

A 15-24 VDC or VAC power supply can deliver power to the nLight UNITOUCH via the polarity insensitive terminal

connections on the back of the unit. The PS 150 version power supply (included in the KIT option) is recommended, as it

conveniently mounts through a knock-out on the back of the junction box where the unit is positioned.

Risk of Electric Shock: Turn off power before any kind of servicing to avoid electric shock.

•Comply with all network and power supply guidelines outlined in the Network Guide.

•Use the screws, wall anchors, and wire nuts included for wall mounting and wiring.

•All wiring must comply with electrical wiring diagrams as well as national and local electrical codes.

•We recommend using CAT5 cable to connect the nLight® UNITOUCH to the controller.

Figure 2- Wiring Diagram (Power)

Mounting Instructions

The nLight® UNITOUCH has been designed for ease in installation; However, certain conditions

must apply when choosing a suitable location for the device. These include:

•Install in a location approximately 5 ft (1.5 m) above the floor

•Install approximately 6” (15cm) from a corner in order to provide sufficient access to the

faceplate release tabs.

RJ-45 nLight

Network Ports

Low-Voltage Terminals

(15-24VDC, 40mA)

3.37”

[85.5mm]

0.75”

[19mm]

0.2”

[5mm]

0.83”

[21mm]

0.2”

[5mm]

0.2”

[5mm]

0.28”

[7mm]

0.28”

[7mm]

0.4”

[10mm]

2.20”

[56mm]

2.28”

[58mm]

3.23”

[82mm]

Figure 1- Device Information

oAllow for proper clearance around the device’s enclosure and wiring terminals to

provide easy access for hardware configuration and maintenance.

oOrient the device with the ventilation slots towards the top to permit proper heat

dissipation.

•Should not be installed on an exterior wall.

•Should not be installed near a heat source.

•Should not be installed near an air discharge grill.

•Should not be installed in a place where it can be affected by the sun.

•Install in an area that provides proper device ventilation. Nothing must restrain air circulation to

the device.

The nLight® UNITOUCH is not designed for outdoor use.

Installation Instructions

Upon unpacking, inspect the contents of the carton for shipping damages. Do not install a

damaged device.

Take reasonable precautions to prevent electrostatic discharge to the device while installing, servicing or

during operation. Discharge accumulated static electricity by touching one’s hand to a well-grounded object

before working with the device.

For proper installation and subsequent operation of the device, pay special attention to the following

recommendations:

1. Turn circuit breaker to OFF position, or remove fuse(s), and test that power is off before installation process.

Never wire any electrical device with power turned on. Wiring while HOT may cause permanent damage to

this device and other equipment and void warranty.

2. Remove the front cover of the device from the mounting plate:

a. Remove the security screw

b. Using an appropriately sized tool, press in the two (2) release tabs on the sides of the device and

pull the front cover out from the bottom. See Figure 3 for security screw and release tab

locations.

3. Pull all cables 6” (15cm) out of the wall and insert them through the central hole of the back plate.

4. Make sure that the mounting surface is flat and clean.

5. Screw the back plate onto the electrical junction box.

6. Plug the wire(s) into the connector(s). Gently push excess wiring back into the wall.

7. Reattach the front plate and make sure it clips tightly into place. Tighten the security screw.

Figure 3- Security Screw and Faceplate Tab Locations

Out-of-Box Defaults

•Screensaver is enabled and the nLight logo is used

•Channels 3-16 are disabled

•Proximity sensor is enabled

•Shade home screen is disabled

•Preset Scenes

oLights On

oLights On –75%

oLights On –50%

oLights On - 25%

oLights Off

User Levels

The nLight UNITOUCH supports two primary user types.

User Type

Description

Administrator

Administrator can access all the features in the device. The administrator only features are

listed below.

•Modify device settings

•Modify Bluetooth settings

•Create/Edit/Delete scenes

•Configure channels

•Configure input/output devices

Basic (Lock-out)

The Basic user privilege allows user to:

1. View and control light channels

2. View and control shade channels

3. Activate and view scenes

4. View product information

Faceplate release tab

Faceplate release

tab

Security screw

Getting Started

Upon powering the device out of the factory, users are walked through initial configuration screens to create

administrator PIN, and set up Bluetooth connectivity for the MyPersonify app. While these settings are set during initial

powering, they are configurable through the settings menu as an administrator, or through SensorView.

Initial Configuration

Users are greeted with a welcome, followed by admin PIN creation and confirmation screens. As a standard, all

PINs in the nLight UNITOUCH are to be 6 digits.

Figure 4 - Initial Admin PIN creation process

When PINs are created and confirmed, users are presented with the ability to manage and confirm Bluetooth settings. If

users opt to require Bluetooth PIN entry during device-to-app pairing, they will be walked through the PIN creation

process. Upon completion with Bluetooth, users will be directed to the main Scenes dashboard.

Figure 5 - Initial Bluetooth PIN setup process

Logging in as Administrator

The login interface can be accessed through the hamburger menu, and the selection to either navigate to the

“Settings” or “Technician Mode” section (See Figure 6).

NOTE: When logged in as an administrator, all Bluetooth capabilities become disabled until logged back out.

Figure 6 - Administrator login workflow

Upon successful login, administrators will be directed to the screen they selected from the hamburger menu.

Logging out of Administrator

Administrators can log out of the unit by tapping on the “Log out” button in the hamburger menu (See Figure 7).

Figure 7- Log out of Administrator mode

Administrators are also logged out when the unit times out and transitions to the screensaver, or when the screen

shuts off due to inactivity.

Main Dashboard Screens

With its ability to allow control of light channels, shade channels and scenes, the nLight UNITOUCH hosts three

main reorganizable navigation screens accessible to all user levels.

Light Control Dashboard

Scene Dashboard

Shade Control Dashboard

Tabla de contenidos

Otros manuales de Cambiar de Acuity Brands

Acuity Brands

Acuity Brands nLight rPOD Micro Manual de usuario

Acuity Brands

Acuity Brands Sensor Switch WSX Series Manual de usuario

Acuity Brands

Acuity Brands SensorSwitch sPODM Series Manual de usuario

Acuity Brands

Acuity Brands nLight AIR rPODBA Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Acuity Brands nLight UNITOUCH Manual de usuario

Manuales populares de Cambiar de otras marcas