ACU-RITE 02099 Manual de usuario
Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Contact Customer Support at
info@chaney-inst.com.
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features and Benets: Sensor ... 2
Features and Benets: Display ... 3
Setup .................................... 5
Sensor Setup ......................... 5
Display Setup ........................ 6
Set the Time, Date and Units.... 7
Backlight Settings................... 7
Placement Guidelines ............. 8
Using the Weather Station...... 9
Programmable Alarms...........10
Troubleshooting ....................11
Care and Maintenance .........12
Calibration ...........................12
Specications........................13
FCC Information ...................13
Customer Support .................13
Warranty..............................14
Weather Station
model 02099 / 264515
2
Congratulations on your new AcuRite product. To ensure the best possible
product performance, please read this manual in its entirety and retain it for
future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display with Tabletop Stand
2. Outdoor Sensor
3. Power Adapter
4. Instruction Manual
Features and Benets
4
3
2
1
5
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
2. Wireless Signal Indicator
Flashes when data is being sent to the
display.
3. Battery Compartment
4. A-B-C Switch
ID code that must match display’s
A-B-C switch to ensure units
synchronize.
5. Battery Compartment Cover
3
DISPLAY FRONT
1. Current Outdoor Temperature
Arrow icon indicates direction temperature
is trending.
2. Current Outdoor Humidity
Arrow icon indicates direction humidity
is trending.
3. Sensor Low Battery Indicator
4. Heat Index
Displays heat index calculation when
temperature is 27 °C (80 °F) or higher.
5. Dew Point
Displays dew point calculation when
temperature is 26 °C (79 °F) or lower.
6. Icon
Indicates display is in auto-dimming
brightness mode (see page 7).
7. Clock
8.
Button
For viewing high and low records.
9.
Display Low Battery Indicator
10. and Buttons
For setup preferences.
11. Button
For setup preferences.
12. Button
For alarm setup.
13. Date
14. Moon Phase
15. Humidity Level Indicator
Indicates a high, low or ideal humidity
comfort level.
16.
Barometric Pressure
Arrow icon indicates the direction
pressure is trending.
17. Current Indoor Humidity
Arrow icon indicates direction humidity
is trending.
18. Current Indoor Temperature
Arrow icon indicates direction temperature
is trending.
19.
12 to 24 Hour Weather Forecaster
Self-Calibrating Forecasting pulls data from
the outdoor sensor to generate your
personal forecast.
20.
Icon
Disappears after weather forecast
self-calibration is complete (see page 9).
21. Sensor Signal Strength
Features and Benets
1
2
4
5
6
7810911 10 12
14
15
17
16
18
13
3
2021 19
4
DISPLAY BACK
1. Backlight Button
For momentary backlight and dimmer
settings.
2
. In
tegrated Hang Holes
For easy wall mounting.
3. Backup Battery Compartment
4. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
5. Plug-in for Power Adapter
6. Battery Compartment Cover
7.
RESET Button
Full reset to factory defaults.
8. Power Adapter
(not shown)
Features and Benets
4
3
2
5
1
7
6
5
SETUP
Sensor Setup
Set the A-B-C Switch
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display in order for the units
to synchronize.
Install or Replace Batteries
AcuRite recommends high quality
alkaline batteries in the outdoor
sensor for the best product
performance. Heavy duty or
rechargeable batteries are not
recommended.
1. Slide off the battery
compartment cover. Take
note of the A-B-C switch
setting inside the battery
compartment for display
setup.
2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
2
1
2Install Batteries
2 AA batteries
A B C
1A-B-C Switch
Set to match
display
6
IMPORTANT: Batteries are
a backup power source to
preserve records in the event of
a power outage. Power adapter
is recommended as the primary
power source to enjoy the full
functionality of this product.
Display Setup
1Set the A-B-C Switch
Locate the A-B-C switch inside
the battery compartment. Set
the A-B-C switch to A, B or C.
You must select the same letter
choices for both the display and
the sensor in order for the units to
synchronize.
Install or Replace Backup
Batteries (optional)
1. Remove the battery
compartment cover.
2. Insert 3 x AAA alkaline
batteries into the battery
compartment, as shown. Follow
the polarity (+/–) diagram in
the battery compartment.
3. Replace the battery cover.
Plug in Power Adapter
For the best performance, plug
in the power adapter as the main
power source for this product.
Install Batteries
3 AAA Batteries
(optional)
2
1A-B-C Switch
Set to match
sensor
A B C
2
3
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that will not
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Plug in Power
Adapter
3
7
Set the Time, Date and Units
Press and release the “ ” button, located on the front of the display, to enter
SET MODE. Once in set mode, the preference you are currently setting will
blink on the display.
To adjust the currently selected (ashing) item, press and release the “ “ or
“ “ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ ” button again to adjust the
next preference. The preference set order is as follows:
Auto DST (Daylight Saving Time ON of OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºC or ºF)
BAROMETRIC PRESSURE UNITS (hPa or inHg)
*If you live in an area that observes DST, DST should be set to ON, even if it is
not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
Enter setup mode at any time by pressing the “ ” button.
Display Backlight Settings
This weather station’s colour display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (15%) brightness.
Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the Backlight button.
When display is powered with the power adapter, backlight remains on at
100% brightness. Press Backlight button once to dim to 60% brightness; press
again to dim to 15%, press a 3rd time to enter AUTO DIM mode.
NOTE: Pressing and holding the “ ” button for 5 seconds will disable the
backlight. Once any button is pressed, the backlight will return to your selected
setting.
AUTO DIM MODE: Automatically adjusts display brightness based on time of day.
7:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 6:59 a.m.= 15% brightness
8
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and outdoor sensor are critical to the accuracy
and performance of this product.
Display Placement
Place the display in a dry area free of dirt and dust. Display
stands upright for tabletop use and is wall-mountable.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor
use, however, to extend its life place the sensor in an area
protected from direct weather elements.
Hang the sensor using the integrated hang hole or hanger,
or by using string (not included) to hang it from a suitable
location, like a well covered tree branch. The best location is
1 to 2 metres (4 to 8 feet) above the ground with permanent
shade and plenty of fresh air to circulate around the sensor.
Important Placement Guidelines
• To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.
• Display and outdoor sensor must be within 100 m (330 ft) of each other.
• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 90 cm (3 ft) away
from electronic devices (TV, computer, microwave, radio, etc.).
(330 feet)
90 cm
(100metres maximum)
Setup is Complete
The sensor will now synchronize with the display. It may take a few minutes for
synchronization to complete. Please refer to the troubleshooting section of this
manual if anything appears to be functioning improperly.
9
OPERATION
Using the Weather Station
Learning Mode
Self-Calibrating Forecasting uses a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the icon disappears from the display screen. At this point,
the self-calibrated pressure is tuned in to your location and the unit is ready for
superior weather prediction.
Weather Forecast
AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast
of weather conditions for the next 12 to 24 hours by collecting data from the
sensor in your backyard. It generates a forecast with pinpoint accuracy -
personalized for your exact location.
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:
Barometric Pressure
Subtle variations in barometric pressure greatly affect the weather. This
weather station displays the current pressure with an arrow icon to indicate
the direction the pressure is trending (FALLING, STEADY, or RISING).
FULL
NEW WAXING
CRESCENT
WANING
CRESCENT
1ST
QUARTER
3RD
QUARTER
High and Low Records
High and low records for today and all-time are displayed for indoor and
outdoor temperature and humidity. Today’s records automatically clear at
12:00am midnight every day.
Press the button to cycle through high and low recorded values for outdoor
and indoor temperature and humidity. While viewing all-time records, a date and
timestamp are shown for when each value was recorded. You will automatically
exit records if no buttons are pressed for 8 seconds.
SNOW / RAIN
MIX LIKELY
CHANCE
OF RAIN
SNOW
LIKELY
STORMY
& WINDY
CLOUDY
(flashing=stormy)
10
To manually clear a HIGH or LOW record, press and HOLD both the “ “ and
““ buttons simultaneously for 3 seconds while viewing the record(s) you wish
to clear. Dashes display to conrm you have cleared the record(s).
Programmable Alarms
This display features programmable alarms that sound an alert to notify you
when a value (for temperature or humidity) has been reached or exceeded.
When an alarm is triggered, the display emits an audible beep and ashes data
in the affected category. You can customize the alarms by turning ON or OFF
the alarms you’d like activated or deactivated, and by inputting your own values
to trigger the alarm.
Setup an Alarm
1. Press and release the “ ” button until the reading for which you wish to
set an alarm is shown on the display. “ ” will be shown.
2. Press and release the “ “ or “ “ buttons until “ ” appears.
3. Press and release the “ ” button. The current HIGH alarm value will be shown.
3. Press and release the “ “ or “ “ buttons to adjust the alarm’s HIGH value.
4. Press and release the “ ” button. The current LOW alarm value will be shown.
5. Press and release the “ “ or “ “ buttons to adjust the alarm’s LOW value.
6. Press and release the “ ” button to end alarm adjustments, OR press
and release the “ ” button to cycle to the next reading.
Disable an Alarm
1. Press and release the “ ” button until the reading for which you wish to
disable an alarm is shown on the display. “ ” will be shown.
2. Press and release the “ “ or “ “ buttons until “ ” appears.
3. Press and release the “ ” button to cycle to the next reading.
4. Repeat steps 1-3, as needed.
NOTE: To disable ALL alarms at once, press and HOLD the “” button for
10 seconds.
You will automatically exit alarm SET MODE if no buttons are pressed for
10 seconds. Enter alarm SET MODE at any time by pressing the “” button.
Otros manuales para 02099
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Estación meteorológica de ACU-RITE
ACU-RITE
ACU-RITE 1525 Manual de usuario
ACU-RITE
ACU-RITE Iris Manual de usuario
ACU-RITE
ACU-RITE 00621 Manual de usuario
ACU-RITE
ACU-RITE 01120M Manual de usuario
ACU-RITE
ACU-RITE 838 Manual de usuario
ACU-RITE
ACU-RITE 02099 Manual de usuario
ACU-RITE
ACU-RITE 2001 Manual de usuario
ACU-RITE
ACU-RITE 13230 Manual de usuario
ACU-RITE
ACU-RITE 01121 Manual de usuario
ACU-RITE
ACU-RITE 00973 Manual de usuario
ACU-RITE
ACU-RITE 01097 Manual de usuario
ACU-RITE
ACU-RITE 1502RX Manual de usuario
ACU-RITE
ACU-RITE 00639W Manual de usuario
ACU-RITE
ACU-RITE 00832 Manual de usuario
ACU-RITE
ACU-RITE 00639W Manual de usuario
ACU-RITE
ACU-RITE 01536CAUDI Manual de usuario
ACU-RITE
ACU-RITE 2030 Manual de usuario
ACU-RITE
ACU-RITE 06019RM Manual de usuario
ACU-RITE
ACU-RITE 06100M Manual de usuario
ACU-RITE
ACU-RITE 8575 Manual de usuario
Manuales populares de Estación meteorológica de otras marcas
National Geographic
National Geographic VA Colour RC Manual de usuario
Renkforce
Renkforce 1208067 Manual de usuario
Levenhuk
Levenhuk Discovery Report WA40 Manual de usuario
Instant Transmission
Instant Transmission MA 10410 Manual de usuario
Lutron Electronics
Lutron Electronics PHB-318 Manual de usuario
WAREMA
WAREMA EWFS Weather station eco Manual de usuario