ActionPro CM-7200 Manual de usuario

Product Overview

ActionPro video camera is a wearable camera that has numerous functions and it features the

latest technology, such as video recording in 1080p HD resolution, 170 degree ultra wide angle

lens, continuous photo shooting, wireless remote control, detachable LCD screen, laser pointer,

HDMI output and rechargeable Li-Ion battery, etc.

ActionPro video camera can be easily mounted on helmets, bicycles, motorcycles, cars, boats or

other devices by using different mounting accessories.

For your convenience, many mounting accessories are already included in the package (please see

package contents on page 13). An included rechargeable Li-Ion battery can last up to 2 hours for

continuous video recording (without LCD screen; or 1 hour 20 minutes with LCD screen). The

included waterproof housing can protect the video camera from water, dust and other hazards.

Table of Contents

Product Layout…………………………………………………..………………………………….2

Function & Features…………………………………..…………………………………………….3

Installation………………………………………………..…………………………………………3

Operation Instructions…………………………………..…...……………………………….5

Camera Set up…….………………………………..…...……………………… ……….6

Camera Operations…………………………………………..……………………………………...8

Package Contents………………………………………………………………………………….13

Optional Accessories………………………………………….…………………………………...14

Specifications………………………………………………….…………………………………..15

Product Layout

1. A/V Out

9. OK

2. LCD screen

10. Right

3. Heat dispensing hole

11. Up

4. HDMI

12. Menu

5. Left

13. Shutter

6. Playback

14. Power indicator

7. Speaker

15. Power

8. Down

16. LCM

Functions & Features

170°ultra wide-angle lens.

Supporting 1080p HD video recording.

Automatic photo shooting (hands-free, shoot 8 megapixel photos automatically at 2 / 3 / 5 /

10 / 20 / 30 / and 60 second intervals until the battery drained or the SD card is full)

Laser pointer: laser synchronous video recording function.

Removable LCD screen: real-time display and video playback.

Waterproof housing (waterproof to 180 ft/ 60 meters)

Rechargeable high-capacity lithium battery.

Four video recording modes available for your selection: 1080P 30fps, 720P 60fps, 720P

30fps, or WVGA 60fps.

Supporting Micro SD card up to 32GB.

Remote control offers hands-free start/stop video recording and photo shooting.

Supporting fast forward and fast rewind and skip of contents in the next segment (when

connecting with the LCD screen).

Supporting USB2.0.

Built-in microphone

Four photo shooting modes available: Single shot, triple shot, continuous shooting and

self-timer.

HDMI out and AV out

Wide selection of sports accessories.

Installation

1. Camera Installation

ActionPro video camera can be used as a wearable camera which can be mounted by using

different mounting accessories. The camera can also be used underwater if a waterproof housing is

installed.

The installation is shown as follows:

(1) Installation and removal of LCD display screen

LCD display screen

Camera

Install LCD display screen onto the camera

**Removing display screen: Press release button on the right hand side and then disconnects the

display screen unit.**

(2) Waterproof Case Installation

Camera

Waterproof case

Place camera into the waterproof case

Note: to use waterproof case

* Handle with care to avoid damage to waterproof case by dropping or physical laceration.

* Clean with clear water after use to avoid rusting.

2. Remote Control Installation

A remote control is included with the action camera.

Installing the remote control:

(1) Velcro

(2) Clip

(3) Tape (optional)

Operating Instructions:

Preparations before use:

1. Start Up

To power on the camera, press the power switch a few seconds to turn on the camera.

In preview mode, the LCM segment screen will display the following items:

A. Record mode: The current record mode can be viewed on the top left corner of the LCM

segment screen, “ ” indicates the video recording mode.

B. Power icon: The power icon “ ” is located on the top right corner of the LCM segment

screen. The icon will appear continuously after the system has been powered on, and will

disappear when the camera shuts down or enters the auto power off mode.

C. Video recording time: Length of the current video recording is displayed in the center of The

LCM segment screen, such as “005:20” which indicates the recording time as 5 minutes and

20 seconds. The video recording time will appear when pressing “Record” button once and it

will stop when pressing “Record” button again.

Note: Both LCM segment screen and LCD display screen will show the video time simultaneously

while recording.

Battery level indicator: The battery icon “ ” is located on the bottom left corner of The LCM

segment screen. It indicates the current battery power after starting up.

Note: The battery level indicator will disappear in auto power off mode.

D. USB connection: The USB icon “ ” is located on the middle bottom of The LCM segment

screen. The icon will appear after connecting the camera to a computer in startup mode and

will disappear when USB is disconnected or the camera is turned off.

E. Micro SD card capacity indicator: The Micro SD card capacity icon “ ” is located on the

bottom right corner of The LCM segment screen to indicate the capacity of Micro SD card.

In preview mode, the LCD display screen will display the following items:

A. Work mode: The video recording icon “ ” located on the top left corner of LCD display

screen indicates the camera is in video recording mode.

B. Battery level indicator: The battery power icon “ ” located on the bottom left corner of

LCD display screen indicates the battery status.

C. Video resolution: video resolution located on the bottom left corner of LCD display screen

indicates the camera is in specific resolution video recording mode by your selection.

D. Storage capacity: The capacity of the external Micro SD card “ ”, the percentage indicates

remaining free space.

E. ‘<’ and ‘>’ operations are not available in the preview mode while “+” and “-“ is to zoom in

and out in the preview mode

F. Camera can be charged with the included power supply or by USB cable. The red indicator of

Working/Charging on the top of the camera will be on slowly but will be off when fully

charged. The charging time for an empty battery is about 4 hours.

Note: Make sure the camera has sufficient battery before use. In case of low battery, charge the

battery via the included power supply or USB cable. The red indicator of Working/Charging will

turn on when charging. The battery icon “ ” displayed on the LCD screen when fully charged.

2. Formatting the Micro SD Card

High-speed Micro SD card is preferred. If the Micro SD card has been used on another device,

format the card on the camera before using.

Note:

*Formatting the Micro SD Card will erase all existing files.

*Locked files will also be removed by formatting.

3. Set the Date/Time

In preview mode, press “Menu” key to enter the menu interface, use “>” key to shift to the setup

interface " ", press “-“ key to select the menu “Date/Time”, and then press “OK” to enter the

setup interface of “Date/Time” . The date is in MM/ DD /YYYY format. (Note: Pressing the

“Menu” key again can exit the setup interface.)

The green color indicates the current cursor position. Use “<” or “>” key to move the cursor and

select date or time. Use “+” and “-“ to change the value of the date and time. Press “OK” to save

the changes.

Camera Settings

In preview mode, press “Menu” key to enter the menu interface, use “<” or “>” key to move the

cursor left or right, and press “+” or “-” key to move the cursor up or down. After selecting the

menu, press “Ok” key to select options, and press “Menu” key again to exit.

1. Resolution

A. Video image resolution: Select 1080P, 720P 60/30 fps, or WVGA.

B. Laser sync :Turn the laser pointer on/off while recording video.

2. Camera Setting

A. Single shot: The shooting mode is set in single shooting by default. Press “Shutter” once to

take a photo.

B. Triple shot: To press “Shutter” once to take three photos continuously.

C. Continuous shooting: Take one photo every 2s/3s/5s/10s/20s/30/60s, until the shutter key is

pressed. The continuous shooting will also stop when battery or storage capacity runs out.

D. Self-timer: Select the self-timer duration time (5s or 10s). Press “Menu” key to return to

“Preview” mode after selection and then press “Shutter” once, the system will start the timer

and the indicator flashes when duration time is approaching. After one photo is taken in

self-timer mode, the system will automatically switch back to single shot mode.

E. Photo resolution: Selectable from 3M, 5M or 8M.

3. Setup

Beep: Turn key tone on/off.

Note: Audio will not be disabled in video recording mode. Beep only turns off the operation key

sound. The audio volume could be adjusted by turning “+” and “-“in playback mode.

A. Time display: Set time before use. Date and time will automatically display on the bottom

right corner of the image or video.

B. Video Length: Video files will automatically be saved in segment once every 5/10/15/30

minutes when changes are made in “Video Length”. The video file will be saved in segment

once every 5/10/15/30 minutes automatically.

C. Auto Power Off: Auto standby time is selectable from (Never Turn Off), 2, 5 or 10

minutes. When there is no operation after selecting the Auto power off, the system will start

timing and the cameras will be turned off at the setting time. If there is any operation during

the timing, the system timer will start over.

D. TV standard: NTSC or PAL. The video TV output format can be selected. After changing the

output format, unplug the AV cable and then re-plug it to update the camera.

E. Format: All files will be deleted by formatting.

F. Default: The operation restores to factory settings.

G. Language: Press “OK” and then select “English”, “Simplified Chinese” or “Traditional

Chinese” by pressing left or right key.

H. Light source frequency: Select the light source frequency 50Hz or 60Hz, depending on local

frequency, in order to avoid the screen flickering when recording.

I. Date/Time: Date/Time needs to be changed manually. Time settings will be displayed on the

right hand lower corner of the videos or photos.

Note: Press “Menu” key under the submenu to exit.

Camera Operations:

1. Insert the Micro SD Card

Note:

a) Please use the included Micro SD card or your own high speed Micro SD card.

b) When no Micro SD card is inserted, the Micro SD card icon “ ” will be displayed on the

LCD screen.

2. Turn On the Camera

Turn on the camera by pressing the power switch.

Note: The battery icon “ ” and the message “Low Battery” will be displayed on the LCD screen

when the camera battery is low.

3. Video Recording

Press “Record” key once in preview mode, the camera will start recording. The video recording

time will be displayed on the LCM segment screen and on the bottom right hand side of the LCD

display screen. The indicators of Recording will flash slowly. When the camera is recording, press

“+” to zoom in or “-“to zoom out. To stop recording, press either record key again or stop key. The

camera will return to the preview mode, and the recording time on the LCM segment screen will

disappear.

Note:

a) By turning the power switch to “Off” during video recording, the system will save the current

file recorded and then shut down.

b) When the battery is low during video recording, the camera will save the current file and

display the “Low Battery” message until the camera is turned off.

c) When the memory is reaching its maximum capacity during video recording. “Memory Full”

message will be displayed on the LCD display screen, and then go back to the preview mode.

d) After adjusting the video length, the camera will automatically save a file every 5/10/15/30

minutes.

e) When the camera is fully charged, the battery life for recording (Without LCD screen) 1080P,

720P, WVGA is 1.5, 1.7, 2 hours respectively.

f) The camera can be connected to high-definition display with HDMI cable in preview mode,

and the basic operation of the camera can be performed on the HD display.

4. Photo Shooting

The photo resolution can be adjusted by pressing “Menu” key to enter the setup interface, press

“>” key to move the cursor to “ ”, select “Resolution”, and press “OK” key to change the

resolution. There are three resolution modes available:

3M: Photo shooting resolution of 2048x1536.

5M: Photo shooting resolution of 2592x1944.

8M: Photo shooting resolution of 3200x2400.

A. Single shot:

Tabla de contenidos

Otros manuales de Cámara de acción de ActionPro

ActionPro

ActionPro X8 Manual de usuario

ActionPro

ActionPro X7 Manual de usuario

ActionPro

ActionPro X7 Neo Manual de usuario

Manuales populares de Cámara de acción de otras marcas

Epic

Epic STC-EPC1T Manual de usuario

Brinno

Brinno MAC200 DN Manual de usuario

GoPro

GoPro HERO5 Manual de usuario

ION

ION Air Pro 2 Manual de usuario

Firefly

Firefly 6s Manual de usuario

Omni

Omni HERO4 Manual de usuario

nedis

nedis ACAM41BK Manual de usuario

MOFILY

MOFILY YOCAM Manual de usuario

ZERO-X

ZERO-X ZX-10 Manual de usuario

Pyle

Pyle eXpo PSCHD90 Manual de usuario

Action Camera

Action Camera AC32 Manual de usuario

Midland

Midland XTC300 Manual de usuario

Movii

Movii QC-8075 Manual de usuario

Coleman

Coleman C5WP Xtreme Manual de usuario

MCM Electronics

MCM Electronics 82-19749 Manual de usuario

Aim

Aim SmartyCam 3 Sport Manual de usuario

Naxa

Naxa NDC-409 Manual de usuario

Panasonic

Panasonic HX-A1M Manual de usuario