System Overview
Introduction
Wireless GSM Burglar Alarm with voice prompt for commercial and home use is built on leading
microprocessor technology with advanced GSM digital signal processing power. It is a highly
integrated system of digital speech, mobile messages, multiple modes of wireless coding, long
distance home appliances controlling, SMS Messages identification and other technologies.
When alarming, it will automatically notify users via mobile network about the possible break in
using either voice calling or SMS messaging. It is stable, reliable and safe. With its user friendly
design and without the need of fixed telephone network, it can be widely used in different
locations including shops, offices, villas, residential estate, garage, warehouse, to name just a
few. It is an ideal choice to protect your properties and personnel safety.
Features
■ Work with GSM SIM card , and voice prompt ,easy of use .
■ Two groups of Scheduled Arming and Disarming function.each time disarmed you can
select the included period of time, eliminating of need of the manual procedure, realizing the
beauty of automatic controls.
■ Four wired zone, six wireless zone, can be set as AWAY, STAY, INTELLIGENT or
CLOSED types ,and each zone can be equipped with many accessories.
■ Using phone (cellular phone) or SMS Messages to configure and control the Panel
remotely.
■ Six groups of phone numbers for voice calling and three groups for SMS Messages, 10
seconds ISD automatic leaving message record
■ Telephone (phone) long distance telephone control for arming, disarming, monitoring,
remote announcement.
■ One group of normally open signal output, which can be externally linked to electrical
appliances with alarming output.
■ Many built in speeches, letting alarm receivers know the accurate alerting location
■ SMS Messages content from alarming Defense zone can be customized.
■ Wireless intelligent study coding, compatible with PT2262 normal encoding and a million
group encoding, convenient and flexible for adding or reducing accessories.Maximum support
50 remote control and 50 sensors.
■ Telephone (phone) long distance telecontrol for arming, disarming, monitoring,
talkbacking, shouting, and controlling appliances, etc.
■ EEPROM information protection, information never lost
■ Built in Ni Hi rechargeable battery and automatically switchable upon power failure, and
notification will be sent via SMS.
■ Panel integrated with either dual band, triple band, quad band GSM/GPRS industrial
graded module, stable and reliable.
.1 System Components and Usage
ARM
The system is at a fully ready status where all detectors are activated in a working state, when
the some events ( burglar, fire, gas leak, etc ) happened and detected, , alarm system alarm
right away.
In a ARM status, the panel [ ARM ] light is on.
