Actia IHMI Manual de usuario

DOC 02110 revision 1 ACTIA PCs

IHMI v2

USER’S MANUAL

DOC 02110-1 ACTIA PCs Page 2 / 52

2016 ACTIA PCs

All or part of this documentation cannot be duplicated or translated by any mean, without written authorization

from the ACTIA PCs company.

This documentation is delivered as is. Liability of the ACTIA PCs company cannot be involved in case of

damage resulting from its practice.

ACTIA PCs makes constant improvements on its products; corrections and modifications to this

documentation can occur without any advice.

www.actia-pcs.fr

e-mail : s[email protected]

June 2016

Preamble

This document only covers IHMI v2 general specifications, external interfaces, installation, software support,

electrical specifications and maintenance. For more information, refer to the user’s manuals of the MPC-

BayTrail processor board (DOC02106) and of the IHMI-MPC board (DOC02097) installed in the IHMI v2.

Cover photo : IHMI v2

(Not contractual)

DOC 02110-1 ACTIA PCs Page 3 / 52

CONTENTS

DESCRIPTION ................................................................................................................................4

System specifications .........................................................................................................4

General specifications.........................................................................................................4

WARNING .......................................................................................................................................5

FEATURES......................................................................................................................................6

CONNECTORS...............................................................................................................................7

Connectors location............................................................................................................8

Ethernet...............................................................................................................................9

USB.....................................................................................................................................9

Mixing Panel........................................................................................................................10

Antennas.............................................................................................................................11

CONFIGURATION...........................................................................................................................12

Jumpers..............................................................................................................................12

BIOS setup..........................................................................................................................13

COMPACT FLASH AND SIM CARD...............................................................................................16

USB interface......................................................................................................................17

CompactFlash interface......................................................................................................17

SIM card holder...................................................................................................................17

LEDS................................................................................................................................................18

System status LED .............................................................................................................18

Ethernet LED.......................................................................................................................18

Reset button........................................................................................................................18

INSTALLATION ...............................................................................................................................19

Cautions..............................................................................................................................19

Antenna cables ...................................................................................................................20

Mixing panel and Ethernet cables.......................................................................................20

Cable cover.........................................................................................................................22

Arm Mount ..........................................................................................................................23

Back Cover .........................................................................................................................24

BUTTONS........................................................................................................................................25

Backlight control..................................................................................................................25

System On and Off .............................................................................................................25

POWER MANAGEMENT ................................................................................................................26

System states .....................................................................................................................26

State display........................................................................................................................27

Configuration.......................................................................................................................28

Profiles................................................................................................................................28

Reset button........................................................................................................................28

PROGRAMMING INTERFACES.....................................................................................................29

Inputs/Outputs.....................................................................................................................29

Power Management............................................................................................................30

Specific BIOS functions ......................................................................................................34

OPERATING SYSTEMS .................................................................................................................35

BOOT..................................................................................................................................35

Drivers.................................................................................................................................35

Power Management............................................................................................................35

Inputs/Outputs.....................................................................................................................36

Audio...................................................................................................................................37

CAN.....................................................................................................................................37

CompactFlash preparation tools.........................................................................................37

ELECTRICAL SPECIFICATIONS....................................................................................................39

MAINTENANCE...............................................................................................................................47

Battery replacement............................................................................................................47

APPENDICES..................................................................................................................................48

Mechanical drawings...........................................................................................................48

Product label.......................................................................................................................50

INCIDENT REPORT SHEET...........................................................................................................51

NOTES ............................................................................................................................................52

DOC 02110-1 ACTIA PCs Page 4 / 52

DESCRIPTION

IHMI v2

Open embedded solution for onboard vehicle computing and multimedia applications

The IHMI v2 is a compact and cost-effective solution for equipping transport systems. It can be installed in

buses, coaches, or light vehicles.

Based on a PC compatible architecture, the computer is easy to implement. Its innovative mechanical design

and safety system allow fanless operation.

System specifications

This panel is composed of a case, a 7” 800x480 TFT display with LED backlight and a resistive touchscreen.

It also includes an embedded computer based on the Intel BayTrail processor, a GPS and a stereo audio

amplifier with one microphone and two loudspeakers.

The PC architecture is composed of an IHMI-MPC baseboard with an MPC form factor processor board.

System functions are described in the IHMI-MPC user’s manual (DOC02097) and MPC-BayTrail user’s

manual (DOC02106).

This basic system can be equipped with extensions (WiFi, Bluetooth etc.). A dedicated location is provided to

receive a GSM (GPRS/EDGE/2G/3G) optional module.

Optionally, an external Mixing Panel PDB (DOC08024) can also be used with the IHMI v2 in order to add

remote interfaces such as serial com ports, automotive inputs/outputs, CAN Bus, audio Line out/microphone,

etc…

General specifications

Electrical:

12 or 24V power supply voltage (8V to 36V Max)

Computer consumption : 15 W max. with extensions

Environmental:

Operating temperature: -40°/ +65°C (*)

Storage temperature: -40 / +85 °C

Relative humidity: 10 to 90% without condensation

Relative humidity: 5 to 95% without condensation (storage)

Dimensions:

Case : 196 x 124 x 57 mm

(*) - Internal operating temperature is deliberately limited to 85°C, this temperature corresponds to a ca se

temperature of approximately 65°C. Beyond this limit, the internal power supply is turned off to prevent

the system to operate outside the component manufacturers' specifications.

- In similar manner, the power supply is turned off when the internal temperature is less than -40°C.

DOC 02110-1 ACTIA PCs Page 5 / 52

WARNING

To prevent fire or shock hazard, do not expose the system to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified

personnel only.

Disposal of Old Electrical & Electronic Equipment (Applicable in the

European Union and other European countries with separate

collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household

waste. Instead it shall be handed over to the applicable collection point for recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly, you will help to prevent potential

negative consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. The recycling of matrials will help to conserve natural resources.

For more detailed information about recycling of this product, please contact your local Civic Office or your

household waste disposal service.

DOC 02110-1 ACTIA PCs Page 6 / 52

FEATURES

The IHMI v2 is composed with two different boards: The MPC-BayTrail processor board and a IHMI-MPC

baseboard.

The main features are:

- 7” Wide LVD Display 800x480 / Backlight Led with luminosity key control and ambient light sensor

- Restive touch screen (4 wires)

- Intel BayTrail processor board (extended temperature -40 / +85°C) with DDR3L SO-DIMM memory

- Compact Flash Interface

- Automotive power supply input with NF ISO/DIS 7637-1-2-3 protection with ignition input

- Management unit using a Z8 microcontroller for the functions:

oSystem start / wakeup / stop

oTemperature control

oDialog with the host via SMBus serial bus

- GPS module with dead reckoning option (internal gyroscope and 2 discrete dedicated inputs for

reverse gear and odometer)

- CAN interface compliant with ISO-11898 24 V up to 1 Mbits/sec

- 3 USB 2.0 interfaces

- Ethernet 10/100/1000 Mbs

- Microphone for GSM and audio system

- Loudspeakers 2x2W

- PCI Express Mini Card interface (USB + PCIe)

- Optional Wifi module (using the PCI Express Mini Card slot)

- Optional GSM/GPRS/3G+ module with SIM card holder

- Optional Bluetooth module

Additional function are provided by the mixing panel. For example with the PDB:

- 4 serial com ports (RS2322/422/485 software configurable)

- 4 protected logical inputs

- 4 logical outputs (relay)

- Audio interface (Line Out, Microphone input)

DOC 02110-1 ACTIA PCs Page 7 / 52

CONNECTORS

Main connectors outputs are located on the IHMI v2 left panel under a cable cover. In order to access them, it

is necessary to remove the back plastic cover, if present, and the cable metal cover.

To remove the back plastic cover, remove the 4 red arrow marked screws in holes using a Torx 10

screwdriver.

To remove the cable metal cover, remove the 2 red arrow marked screws on the sides using a Torx 8

screwdriver.

DOC 02110-1 ACTIA PCs Page 8 / 52

Before unplugging the cables, you must cut the cable ties.

Connectors location

Ethernet 10/100/1000 Base T

USB

Mixing Panel

Jumpers

Internal Speaker Left

Internal Speaker Right

Internal Microphone

Antenna cables

DOC 02110-1 ACTIA PCs Page 9 / 52

Ethernet

JST BM12B-PUDSS-TFC type

This connector is used to connect an Ethernet 10/100/1000 cable.

Pin Cable* Function

1, 2, 3, 4 Shield Shield

5 Orange MX1-

6 Orange/White MX1+

7 Green MX2-

8 Green/White MX2+

9 Blue/White MX3-

10 Blue MX3+

11 Brown MX4-

12 Brown/White MX4+

* Recommended color

USB

JST BM10B-PUDSS-TFC type

This connector offers a USB interface in addition to the interfaces located on the board.

Pin Designation Function

1, 3, 5, 9, 10 GNDUSB2 Electrical ground (shield, case)

2 USB2- Signal data USB-

4 USB2+ Signal data USB-

6 GNDUSB2 Electrical ground

7, 8 VUSB2 USB power supply (max 1A)

DOC 02110-1 ACTIA PCs Page 10 / 52

Mixing Panel

JST BM26B-PUDSS-TFC type

This connector offers the power supply, ignition control, logical inputs/outputs, the USB and +5V

power supply for the mixing panel, CAN interface, and specific inputs for dead reckoning GPS

operation.

Pin Designation Function Notes

1,2 VBAT 8 V to 36 V power input External fuse 5AT needed

3, 5, 7, 14, 26 GND Electrical ground

4 IGNITION Ignition information input Active from 5 V to 36 V

6 REVERSE GPS dead reckoning reverse gear input

8 ODOMETER GPS dead reckoning odometer input

9 UBS+ USB To mixing panel

10, 12 VPDB 5V power supply for mixing panel PDB power supply (max 1A)

11 UBS- USB To mixing panel

13 USB shield USB USB Twisted pair shield

15 CANL CAN bus

16 CANH CAN bus

17 IN3 General Purpose Input 3 LVTTL input, (max 3.3V)

18 IN2 General Purpose Input 2 LVTTL input, (max 3.3V)

19 IN1 General Purpose Input 1 LVTTL input, (max 3.3V)

20 IN0 General Purpose Input 0 LVTTL input, (max 3.3V)

21 OUT1 General Purpose Output 1 LVTTL output, max 10mA

22 OUT0 General Purpose Output 0 LVTTL output, max 10mA

23 OUT3 General Purpose Output 3 LVTTL output, max 10mA

24 OUT2 General Purpose Output 2 LVTTL output, max 10mA

25 SHIELD Cable shield

Vehicle Interface discrete input stages

Concerns the following inputs: REVERSE and ODOMETER

By default, detection occurs when the inputs are grounded. A low impedance load connected to

ground is equivalent to grounding of the vehicle interface input.

To detect a positive voltage, the board is equipped with a zone for jumper E26 and E27 (see

CONFIGURATION chapter).

400V diode

10K

Vehicle signal input

100nF

Switch

4K7

To internal logic

10K

470pF

4.7K

VCC (Internal +5V)

Tabla de contenidos

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario